Canopia by Palram Dallas/Colorado 14x20 / 4.3x6 Assembly Instructions

Important Information

Please read these instructions carefully before starting assembly. Keep these instructions in a safe place for future reference.

This guide is designed for the Dallas and Colorado models, specifically the 14x20 / 4.3x6 dimensions.

Before You Begin

Site Selection: Choose a suitable location for your gazebo. Ensure the site is flat, level, and away from overhanging trees. Proper site preparation is crucial for stability.

Tools & Equipment: Gather all necessary tools and equipment as listed in the manual. It is recommended to have at least two people for assembly.

Parts Check: Unpack all components and verify them against the parts list provided. Keep small parts organized to avoid loss.

Assembly Process

Follow the steps in the exact order presented in this manual. Pay close attention to the diagrams and icons, which provide important visual cues.

Foundation: The product must be anchored directly to a solid foundation for stability and wind resistance. The supplied screws and anchors are for concrete fixing only. Consult an expert for suitable fasteners for other surfaces.

Safety First: Always wear appropriate safety gear, including work gloves and safety goggles. Avoid assembly in windy or wet conditions. Keep children and pets away from the assembly area.

Care & Maintenance

To maintain your gazebo, clean it with a mild detergent solution and rinse with cold water. Avoid abrasive cleaners or acetone.

Support

For further assistance or to find answers to frequently asked questions, please visit canopia.shop/support.