Canopia by Palram LEDRO 10x10 / 3x3 Palermo Enclosure System Assembly Instructions

Introduction

This document provides detailed instructions for assembling the Canopia by Palram LEDRO 10x10 / 3x3 Palermo Enclosure System. It covers essential steps from site preparation and foundation selection to the final anchoring of the structure. Please read all instructions carefully before beginning assembly to ensure a safe and successful build.

For your convenience, video assembly guides and further support are available. Visit canopia.shop/Assembly-Ledro for video instructions or canopia.shop/support for additional assistance.

Key Information

• Safety First: Always prioritize safety during assembly. Wear appropriate protective gear such as work gloves, safety shoes, and goggles. Follow manufacturer guidelines for tools.
• Site Preparation: Ensure the chosen location is a flat, level surface, free from obstructions. Anchor the product securely to a solid foundation for maximum stability and wind resistance.
• Tools & Equipment: Gather all necessary tools and equipment as listed in the manual, including a ladder, drill, screwdrivers, and measuring tape.
• Assembly Process: It is recommended that two people assemble this product. Follow the steps in the exact order provided to avoid errors.
• Care & Maintenance: Clean the product with a soft cloth and cold water after assembly. Avoid using harsh chemicals.

Resources

For detailed information on specific assembly steps, tools, and maintenance, please refer to the respective sections within this document.

For customer support and additional resources, visit the Canopia by Palram website.