Instruction Manual for PYROFARMS models including: FluoroSphere, Water Filled Orb, FluoroSphere Water Filled Orb
Sharper Image
Fluorescent Light Globe @ SharperImage.com
The FluoroSphere is a water-filled Orb that sits on a UV light base. As the FluoroGel dissolves into the water, a brilliant fluorescent light show is produced.
File Info : application/pdf, 2 Pages, 2.70MB
DocumentDocumentFluoroSphere Instruction Manual WHAT'S INCLUDED 4" Ultraviolet Blacklight Base 6" Glass Orb 10ml FluoroGel Silicone Stopper NOT INCLUDED 3 AAA Batteries PRECAUTIONS FluoroGel may stain fabric and skin temporarily Be careful when handling FlouroGel INSTRUCTIONS Place three (3) AA batteries into the UV light base. If FluoroGel has separated, swirl and shake the bottle to thoroughly mix the FluoroGel solution. Red FluoroGel Green-Yellow FluoroGel Unmixed Mixed Unmixed Mixed INSTRUCTIONS (Continued) Remove silicone stopper from the top of glass orb. Fill glass orb with room temperature tap water. Leave about a half inch of space from the top opening. Use caution to not overfill. Dry outside of orb and place on the UV light base. Turn light base on (press black button on side). Darken the room for a better effect. Gently mix Fluorogel. Add 10-15 drops FluoroGel to the orb through top opening. Watch the show slowly develop. Take a picture and share it. #FluoroSphere FluoroSphere can be left on light base as a room decoration. CLEANING THE FLUOROSPHERE Remove silicone stopper from the top of glass orb. Empty contents into sink. Rinse glass orb and base with warm water. WHAT IS THE FLUOROSPHERE? The FluoroSphere is a water-filled Orb that sits on a UV light base. As the FluoroGel dissolves into the water, a brilliant fluorescent light show is produced. The FluoroSphere is not living and is based on fluorescence. Fluorescence occurs when a fluorescent compound (FluoroGel) absorbs light of short wavelength (blue/UV) and releases light of a longer wavelength (yellow-green). The FluoroSphere comes with a 6-inch glass sphere, UV light base and a bottle of FluoroGel. Once the FluoroSphere is filled with water and placed on the UV light base, FluoroGel is slowly added. As the FluoroGel dissolves into water a unique light show begins. TRY THE FOLLOWING OPTIONS TO CHANGE THE FLUOROSPHERE EFFECTS Gently swirl water before adding the FluoroGel Slightly chilling water before adding the FlouroGel Use warm water in the FluoroSphere Use another clear glass container that can safely site on the light base More FluoroSphere Information OTHER PYROFARMS PRODUCTS The Bioluminescent Bio-Orb with OctoStand The Bio-Orb is a hand-blown glass sphere filled with bioluminescent PyroDinos (dinoflagellates). It is all natural! Seawater and Dinos in a glass Orb on a metal Octopus Stand. The Bio-Orb will produce natural light (bioluminescence) at night when gently swirled. Easier than a houseplant to care for. Read about the Bio-Orb 2075 Corte del Nogal · Suite T · Carlsbad, CA 92011 #fluorosphere · pyrofarms.com SHOW THE GLOW Created In California