CONSTANTIN Corner Bench Assembly Instructions

Product Overview

This document provides assembly instructions for the CONSTANTIN corner bench.

Maximum Load Capacity: 360 kg

Visual Indicators:

• Two figures indicating suitability for two people.
• A clock symbol indicating time.
• A weight symbol indicating maximum load.
• A prohibition symbol indicating no standing on the furniture.
• A prohibition symbol indicating no jumping on the furniture.

Parts List

The following parts are included in the package:

• Part A: x1
• Part B: x1
• Part C: x1
• Part D: x1
• Part E: x2
• Part F: x4
• Part G: x4 (M8*45mm screws)
• Part H: x16 (M8*35mm screws)
• Part I: x12 (M6*16mm screws)
• Part J: x32 (Washers)
• Part K: x1 (Allen Key)

Assembly Steps

Step 1

Attach part D to part A using screws G (M8*45mm) and washers J. Insert screws through the pre-drilled holes in part D and into the corresponding fittings on part A. Tighten using the Allen key K.

Hardware Used: G x4, J x4, K x1

Step 2

Connect part B to part A and part C to part B. Secure these connections using screws I (M6*16mm) and washers J. Ensure parts A, B, and C are aligned correctly before tightening.

Hardware Used: I x12, J x12, A x1, B x1, C x1, D x1

Step 3

Attach the backrest supports (parts F) to the main bench structure. Use screws H (M8*35mm) and washers J to secure these supports. Insert screws through the designated holes in the supports and into the bench frame. Tighten with the Allen key K.

Hardware Used: F x4, H x16, J x16, K x1