BDSK Handels GmbH & Co. KG Mobile Pedestal Assembly Instructions
Model Number: 28580028-01
Manufacturer: BDSK Handels GmbH & Co. KG
Address: Mergentheimer Straße 59, DE-97084 Würzburg, Germany
Contact: Info@xxxlutz.at
Product Overview and Safety
This document provides assembly instructions for the BDSK Handels GmbH & Co. KG mobile pedestal. Please follow all steps carefully. Ensure you have all parts and tools before beginning assembly. Maximum load capacity for the top drawer is 20kg, and for the lower drawers is 5kg each. Two people are recommended for assembly. Estimated assembly time is indicated by a clock symbol [clock emoji].
Warning symbols:
- [Exclamation mark] indicates a warning or important note.
- [Check mark] indicates a correct assembly step.
- [Cross mark] indicates an incorrect assembly step.
Parts List
The following parts are included in the package:
- A: Screws, 6 x 36mm (x21)
- B: Drawer Slides (x21)
- C: Screws, 7 x 38mm (x6)
- D: Screws, 8 x 30mm (x10)
- E: Dowels, 4mm (x1)
- F: Screws, 3.5 x 12mm (x36)
- G: Screws, 4 x 35mm (x12)
- H: Screws, M4 x 18mm (x8)
- I: Screws, 4mm (x4)
- J: Small Screws (x4)
- K: Casters, 20mm (x12)
- L: Screws, 4 x 14mm (x16)
- Numbered parts (1-19) represent the main components of the pedestal.
Assembly Steps
Step 1: Attaching Drawer Slides to Side Panels
- Take side panel 1 and attach drawer slides (17) using screws (F) and (A). Ensure correct orientation as shown in the diagram.
- Repeat for the other side panel.
Step 2: Assembling the Main Frame
- Attach the bottom panel (4) to the side panels (1 and 2) using screws (F).
- Attach the back panel (3) to the assembled frame using screws (D) and (B).
Step 3: Inserting the Top Panel
- Slide the top panel (5) into the designated slots on the side panels.
Step 4: Assembling Drawers
- Assemble the drawer boxes using the provided panels (6, 7, 8, 9, 10, 11, 12, 13, 14, 15) and screws (C, D, E).
- Attach the drawer slides (17) to the sides of each drawer box using screws (F).
Step 5: Attaching Casters and Drawer Fronts
- Attach casters (K) to the bottom of the main frame using screws (L).
- Attach drawer fronts to the assembled drawer boxes.
Step 6: Inserting Drawers and Final Touches
- Carefully slide the assembled drawers into the corresponding slides on the main frame.
- Ensure all screws are tightened securely.
Step 7: Drawer Slide Mechanism Detail
Detailed views show the correct insertion and locking mechanism for the drawer slides (B) into the drawer boxes (10, 11, 13, 14) using screws (B) and (D).
Step 8: Completing Drawer Assembly
Further detail on assembling drawer boxes using parts (10, 11, 13) and attaching casters (K) with screws (K).
Step 9: Final Drawer Slide Attachment
Instructions for attaching the remaining drawer slides (17) to the drawer boxes (9, 10, 11, 14, 15) using screws (F).
Step 10: Inserting Drawers into Pedestal
Illustrations show the correct method for inserting the assembled drawers into the pedestal, with close-ups of the slide engagement.
Step 11: Securing the Back Panel
Final step involves securing the back panel (5) using screws (J) and (F).
