Mamibot iGLASSBOT W120-P Robot Window Cleaner

Introduction

Thank you for purchasing the Mamibot Robot Window Cleaner W120-P, featuring a dual self-water-spraying system. We hope the W120-P will bring you a smarter and more convenient lifestyle. If you encounter any problems not mentioned herein, please contact info@mamibot.com. For more details, please visit our official website: http://www.mamibot.com.

Please read all instructions before using this product and keep it properly for future reference.

Safety Instructions and Warning

Please read all instructions carefully and keep them handy for setting up, using, and maintaining the W120-P. Any operation that goes against the following instructions may damage the device or cause injury.

The W120-P is not to be used by children. Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge may only use this device if they are supervised or have been given instruction about how to use it safely and understand what risks are involved.

Notes for Main Unit and Components

• Use only the original adapter, plug, and battery. Use of other types will result in malfunction and/or danger.
• Use the proper electric outlet and make sure no heavy objects are placed on the adapter or power cord.
• Allow adequate ventilation around the adapter when using it to operate the device. Do not cover the adapter with objects that will reduce cooling.
• Always switch the W120-P off before carrying out any cleaning or maintenance work.
• Do not use the W120-P in a high moisture environment. Never handle the adapter with wet hands.
• Connect the adapter to a proper power source. The voltage requirements are found on the adapter.
• Do not use a broken adapter, power cord, or plug. The plug must be removed from the device before cleaning or remaining the device.
• Do not unplug the plug by pulling the power cord.
• Do not attempt to service the adapter and battery. Replace the whole unit if it is damaged or exposed to high moisture. Contact a Mamibot dealer for help and maintenance.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, short circuit, heat above 40°C (104°F), or incinerate.
• Do not expose your W120-P, adapter, and battery to rain or excess humidity, and keep it away from liquids (such as beverages, faucets, and so on).
• Avoid exposing your W120-P, adapter to direct sunlight or intense light source, and keep it away from heat sources (such as radiators, space heaters, stoves, and so on).
• Do not place your W120-P in the vicinity of strong magnetic fields.
• Do not use it on cracked glass or to clean other surfaces with uneven areas as it may fall off due to insufficient suction power.
• Operating W120-P at temperature: 0°C - 40°C (32°F - 104°F).
• W120-P must be used in accordance with the instruction manual.

Warning

• Manufacturer cannot take any responsibilities for any damages or injuries caused by improper use.
• Check if the safety rope and extension cable are broken or not before use.
• Fasten the safety rope and tie it to indoor fixtures before using W120-P.
• Set a danger warning area downstairs for no-balcony windows and doors.
• Battery shall be charged (Blue light is on on the robot) before use.
• Do not use it on rainy or moist days.
• Switch power on before you put the device onto glass.
• Make sure W120-P can stick and stand on the glass surface while put onto glass.
• Make sure to put the cleaning pad on the bottom of W120-P correctly to avoid water leakage.
• Do not spray or pour water onto W120-P and adapter.
• Keep hair, loose clothing, fingers, and all parts of the body away from the openings and moving parts.
• Do not use in areas with existing flammable or combustible liquids, gas.
• Please fully charge (About 1-2 hrs) and turn off W120-P and place it in a cool and dry place if you do not use it for a long time. Charge it every 3 months at least to avoid battery dead.
• Please turn the switch on when you are going to W120-P, so that you can check the status of the indicator.

Specification

* The data comes from the lab of Mamibot Manufacturing USA Inc. It may be slightly different from the users' data; please subject to the actual products. For continuous product improvement, we reserve the right to any technical and design change without prior notice.

What's in the package

• W120-P x 1pc with Safety Rope
• Cleaning Pads x 2pcs
• Remote x 1pc
• AC Plug x 1pc (with power cord)
• Adapter x 1pc
• Extension Cable x 1pc
• Measuring Cup x 1pc
• User Manual x 1pc

Accessories of some models may be slightly different and they are subject to the actual received products.

Product Description

Main Unit

Top View:

Features include: Water Tank Lid, LED Indicator (Blinking Red: Alarm; Blue: Normal/Fully Charged; Solid Red: Charging), Hand Grip, Safety Rope Hole, Power Cord Hole.

Bottom View:

Features include: Anti-falling Sensor, Velcro, Cleaning Pad, Wheel Belt, Spray Nozzle, Air Inlet, Air Outlet, LED Indicator (Blinking Red: Alarm; Blue: Normal/Fully charged; Solid Red: Charging).

Switch:

• Short Press: to start/resume
• Long Press: to switch W120-P on/off

Remote Control

Buttons include: Auto/Manual Water Spraying Switch, Manual Spraying Button, Manual Move Up, Manual Move Left, Manual Move Right, Manual Move Down, Start Cleaning Button, Auto "Z" Cleaning Type, Auto "N" Cleaning Type, Auto "Z" and "N" Cleaning Type, Stop Cleaning, Pause/Resume.

Self-Water-Spraying System

• Auto Mode: Hold and press the switch on W120-P to turn it on, then press the start button. It will enter Auto water-spraying mode by default, and the indicator is blinking blue. Users can select the spray interval with 5s, 10s, 15s, and 20s modes via the App.
• Manual Mode: Press the Auto/Manual Water Spraying Switch at auto-mode. W120-P will enter the manual water-spraying mode, and the indicator is solid blue. Users can press the manual spraying button on the remote or App to spray water manually.

Attention:

1. The above settings and operations are for reference; Mamibot reserves the right to changes in settings and operations which are subject to change without prior notice.
2. When using W120-P for the first time or after refilling the water tank, if the robot doesn't spray water under Auto-mode initially, please start W120-P, enter manual water spray mode, then hold and press the manual spraying button continuously on the remote to fill the water pipe until the nozzle sprays water, then you can enter the auto-mode again.

Cleaning Modes

Note: Please ensure the edge of W120-P is 8cm or more away from window frames or corners before cleaning.

• "Z" Cleaning Mode: Start W120-P in the center of the glass. It will detect the frame upwards first, and the frame left second, after that, it will start cleaning with a "Z" shaped path.
• "N" Cleaning Mode: Start W120-P in the center of the glass. It will detect the frame upwards first, and the frame left second, after that, it will start cleaning with an "N" shaped path.
• "Z|N" Cleaning Mode: Press the button on the remote or App. W120-P will clean the glass with "N" & "Z" shaped paths. It is recommended to use this mode on large working surfaces.

Controls:

• Start: Press the button to start cleaning.
• Stop: Press the button to stop cleaning.
• Pause/Resume: Press the button to pause/resume cleaning.

Notice:

• W120-P will return to the start position after automatic cleaning is finished. It is normal that sometimes the start position and return position are slightly different.
• The cleaning path is for reference; please subject to the actual products.

Installation

Charging

Plug the adapter into W120-P, connect the adapter, AC plug, and extension cable properly.

Charging Indicator: Solid Red: Charging; Blue: Fully charged after 1-2 hrs charging.

Cleaning Pad Attaching

• Use the original cleaning pads and attach them to the W120-P bottom properly. The cleaning pad should not cover the wheel belts or anti-falling sensors.
• Please do not spray too much water on the cleaning pads when in use to avoid slipperiness.

Fill up the Water Tank

Open the water tank lid, fill up the water tank with clean water before starting it, then seal the lid.

• Do not add dirty water or thick liquids into the water tank.
• Do not add corrosive or flammable liquids into the water tank.

Safety Rope Fixing

The safety rope must be tied to indoor fixtures tightly before use. Make sure the length of the safety rope is appropriate for cleaning.

Note:

1. Please check the safety rope; make sure the rope is not damaged and the knot is not loose.
2. Set a danger-warning area downstairs for no-balcony windows and doors before use.

To Use W120-P

Switch On/Off

Plug the W120-P into the power supply, hold and press the switch [power-symbol] on W120-P for about 2 seconds to turn it on, then place W120-P on the window glass.

Note: Hold and press the switch [power-symbol] for about 2 seconds again to turn it off.

Start W120-P

1. Make sure the edge of W120-P is 8cm or further away from window frames or corners before cleaning.
2. Press the “Start”/"N"/"Z"/"Z|N" button on the remote or App to start cleaning.

Stop/Pause/Resume

1. When W120-P is cleaning, press the STOP button [stop-symbol] on the remote to stop it.
2. When W120-P is cleaning, press the Pause button [pause-symbol] on the remote to pause it, and press it again to resume cleaning.

Users can also operate W120-P via the App.

Take W120-P Back After Cleaning

W120-P will return to its starting point automatically after cleaning is finished. There will be a beep reminder when cleaning is finished.

1. Use the remote to move W120-P to a reachable location.
2. Hold the hand grip and the safety rope, press the switch button on W120-P for 2 seconds, then take it off from the window.
3. Clean the pads in time and dry them for future use.
4. Empty the water tank if you are not going to use it for a long time.

APP Use

Scan the QR Code or search "iGLASSBOT" from the Apple Store or Google Play to download the App.

Android System: Requires Android 4.3 or later.

iOS System: Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch.

App Operation Steps:

1. Open the App "iGLASSBOT" as shown in the figures.
2. Turn the switch on of W120-P and place it onto the glass.
3. Use the App to search W120-P; it will get the hotspot of W120-P.
4. Tap the hotspot (e.g., "CleanRobot XXXX"); the App will be paired with W120-P, then enter the control panel of the App.
5. Use the App to control the robot.

* The interface may be different from the actual interface due to improvements; please subject to the actual products.

Please exit the App first if you are going to connect the robot with other devices.

Maintenance

1. After each cleaning, wash the cleaning pads and dry them for future use.
2. Clean the belt with a soft and damp cloth, then dry it.
3. Wipe the air inlet regularly.

Disclaimer

Mamibot makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Further, Mamibot reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

The user is responsible for judging the place and safety of this glass cleaning tool usage. However, the instructions in this user manual must also be followed.

Product Warranty

• The W120-P has a 1-year limited warranty against original defects in workmanship or material.
• The warranty only applies to authorized distributors of Mamibot.
• Improper usage or usage not in accordance with the user manual will void the warranty.
• The application of force majeure will be invalid.
• Normal reductions, such as battery aging, mopping cloth aging, are not guaranteed.

Note: Please replace the battery pack after 1 year of purchase. Please keep and provide your proof of purchase and S/N when making a claim.

Exclusions

This warranty will automatically become null and void and shall not be applicable to products if:

• Normal wear and tear (e.g., cleaning cloth, safety rope, etc.).
• Reduction in battery discharge time due to battery age or use.
• Expiration of the warranty.
• Damage caused by accident, abuse, or misuse.
• Damage caused by force majeure.
• No purchase record.
• Other conditions that are not covered by the warranty.

Troubleshooting

If there are still problems with W120-P after taking the referred measures, please contact the service center for help.

Recycling of W120-P

The symbol on the product or its package indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.

The product was tested and found to be in compliance with: Directive 2014/53/EU, RoHS 2.0 Directive (EU) 2015/863.

Mamibot reserves the right to changes in text, design, and technical specifications which are subject to change without prior notice.