Lorex 2K Wired Floodlight Security Camera

Package Contents

• 2K Wired Floodlight
• Mounting Plate
• Junction Box Screws (x2)
• O-Rings (x5)
• Mounting Anchors & Screws (x3)
• Machine Screws (x2)
• Wire Caps (x3)
• Short Machine Screws (x2)

Tools Needed

• Drill
• Screwdriver

Overview

The camera unit includes the following components:

1. LED Panel
2. IR Light
3. Camera
4. Microphone
5. Speaker
6. Status Indicator
7. MicroSD Card Slot
8. Reset Button
9. Mounting Bracket
10. Floodlight Housing
11. Security Screw
12. Rubber Plug
13. QR Code
14. PIR Sensor

Status Indicator

*Press and hold the reset button until you hear audio prompts.

Important Warnings

⚠️ TURN OFF THE POWER RUNNING TO YOUR EXISTING CIRCUIT AT THE BREAKER.

If you are unsure of which breaker controls the circuit, turn off the main power switch. If you do not know where your breaker is or how to turn off power, consult a licensed electrician.

Make sure the supply voltage is correct. 100-240 VAC 50/60Hz is required.

DO NOT connect the floodlight to a dimmer or timer.

Mounting Setup

If you are not replacing a light fixture, you will need to run power cabling to the install location and purchase a UL listed junction box for a licensed electrician to install.

1. Remove the existing light fixture and bracket from the wall, and then disconnect the wires. Tip: Bend the power cables so they do not fall through the wall.
2. Run the existing wires through the middle of the Mounting Plate.
3. Place and align the Mounting Plate with the ⬆️ UP arrow pointing up. Ensure the 2 horizontal holes are level.
4. Secure the Mounting Plate to the Junction Box using the included Junction Box screws.

For additional installation instructions, visit: help.lorex.com/W452ASSeries

Wiring & Installation

⚠️ WARNING: Power wire colors in your home may be different. In such a case, consult a licensed electrician.

Use the Wire Caps to connect the wires:

1. Twist the Ground wire (green) to the ground wire.
2. Twist the Live wire (black) to the live wire.
3. Twist the Neutral wire (white) to the neutral wire.

Carefully fit the wires back into the Junction Box.

Slide the O-Rings onto the Machine Screws, and then use a Phillips-head screwdriver to secure the Mounting Bracket to the Plate.

Ensure the Outer Ring is completely rotated counter-clockwise.

Align the 2 grooves inside the Floodlight to the 2 posts on the inner sides of the Bracket, and then push the Floodlight into place. Ensure there are no gaps around the perimeter between the Floodlight and Bracket.

Tip: Align the ? to the ? symbol on the sides.

Twist the Outer Ring clockwise until the ? and the ? symbols align.

Tighten the pre-installed locking screw at the bottom of the Mounting Bracket.

Remove the Rubber Plug at the bottom of the Floodlight.

Adjust the camera and LED Panels to the desired position by loosening/tightening the screws on the LED panel arms and the camera.

Turn the power ON at the breaker. If the status indicator does not turn on, check that the wiring is correct.

Add the Floodlight to the Lorex Home app.

Device App Setup

Download the Lorex Home app.

Tap the ➕ icon to add your Floodlight.

Need Help?

For additional mounting and support material, visit: help.lorex.com/W452ASSeries

Register Your Product

Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/pages/warranty

Features

• 2K Resolution: Clear video day and night.
• Color Night Vision: Enhanced clarity for nighttime viewing.
• Smart Motion Detection: Three modes (Person, Vehicle, Animal) to reduce false alerts.
• 2-Way Talk: Communicate with visitors via the Lorex Home app.
• Adjustable Lights: Customize brightness and color temperature.
• Private Local Storage: Secure storage on the pre-installed 32GB MicroSD card with no monthly fees.
• Siren: Deter unwanted visitors.
• Works with Hey Google and Alexa: Voice control integration.

Your Floodlight, Your Way

• Set lights to perfect brightness and adjust between warm or cool temperatures.
• Adjust camera and LED panel positions for optimal illumination.
• Choose from 4 Light Modes: Motion-Activated, Camera Activated, Manual, and Scheduled.

Auto-Framing

Track, follow, and zoom in on people or vehicles hands-free during live view.

Simplified Installation

Lightweight and compact design with flexible mounting options.

Privacy is a Priority

Videos are private and securely stored on the pre-installed 32GB MicroSD card. Access all features with no monthly fees.

Build Your Security Your Way

Create a Lorex Smart Home Ecosystem by adding other Lorex devices, or connect to a Fusion Recorder for additional storage and 24/7 recording.

Product Specifications

Sensor

• Image Sensor: 1/2.8" CMOS
• Sensor Resolution: 4 MP

Optical

• Lens Type: Fixed
• Focal Length: 2.8 mm
• Aperture: F1.6
• Shutter Speed: 1/3-1/100,000 s

Video

• Video Resolution: 2560×1440 (2K)
• Aspect Ratio: 16:9
• Frame Rate: 2K @15fps
• HDR: Yes
• White Balance: Auto
• Gain Control: Auto
• Noise Reduction: 3D Temporal
• Signal-Noise Ratio (SNR): > 56dB
• Video Codec: H.265, H.264

Field of View

• Diagonal FOV: 122°
• Horizontal FOV: 104°
• Vertical FOV: 55°
• PIR FOV: 270°

LEDs

• White LED: Yes
• White Light Brightness: 1500-2400 Lumens
• White Light Color: 5000 K

Low Light

• IR Night Vision Range: 33ft (10m)
• Minimum Color Illumination: 0.005 Lux@F1.6

Wi-Fi

• WLAN Protocols: IEEE 802.11 b/g/n
• Wi-Fi Frequency Bands: 2.4/5 GHz

Audio

• Microphone: Yes
• Speaker: Yes
• Siren: Yes
• Two Way Talk: Yes
• Audio Codec: G.711

Mounting

• Mount Type: Wall Mount and Ceiling Mount

Storage

• Capacity: Up to 256 GB MicroSD

Electrical

• Max Power: 7.6W
• Input Voltage: 100~240 VAC, 50/60Hz
• Max Current: 0.63A

Integrations

• Remote Viewing: Lorex Home
• Google Assistant: Yes
• Amazon Alexa: Yes

Model Information

US Package

• W452ASD-E (white): 6-95529-04667-9
• W452ASDB-E (black): 6-95529-04664-8

Canadian Package

• W452ASD-F (white): 6-95529-05009-6
• W452ASDB-F (black): 6-95529-05008-9

Package Details

• Package Type: Giftbox
• Package Weight: 4.4lb / 2kg
• Package Dimensions (W x D x H): 11.8 x 8.8 x 9" / 300 x 224 x 229mm

Disclaimers

• For product compatibility, visit www.lorextechnology.com/compatibility
• Smart Motion Detection accuracy depends on various factors including distance, height, angle, object size, and ambient light.
• Person Detection accuracy may be compromised if the face or body is partially covered.
• Color Night Vision clarity and activation depend on ambient lighting. If insufficient light, the camera switches to IR (black and white) night vision. IR range depends on installation location and ambient conditions.
• Stated IR illumination range is based on ideal conditions (up to 32 ft / 10 m in total darkness). Actual range and clarity depend on installation location and environment.
• Controlling certain features requires a compatible smart device. Feature availability may vary by area or network. Visit www.lorex.com/smarthome for compatibility and instructions.
• Audio and video recordings without consent may be illegal in certain jurisdictions. Lorex Technology is not liable for non-compliance with local laws.
• Not intended for submersion in water. Installation in a sheltered area is recommended.
• Recording time may vary based on resolution, quality, lighting, and scene movement.
• Requires a high-speed internet connection and a 2.4Ghz Wi-Fi router (not included). Minimum upload/download speed of 10 Mbps is required for optimal performance. Visit www.lorex.com/support for supported apps and devices.
• Lorex products are for consumer and business use only, not for US federal governments or contractors subject to NDAA.
• All trademarks belong to their respective owners. Lorex reserves the right to change models, configurations, or specifications without notice.
• Apple, App Store, Google, Google Home, Google Play, Google Assistant, and Chromecast are trademarks of their respective owners. Amazon, Alexa and related logos are trademarks of Amazon.com, Inc.