HAVIT SK802BT Portable Wireless Outdoor Speaker Product Manual

Product Overview

This manual provides instructions for the HAVIT SK802BT Portable Wireless Outdoor Speaker.

Product Structure

The speaker has the following components:

• 1. Mode switching button
• 2. PREVIOUS/VOL- button
• 3. NEXT/VOL+ button
• 4. Multi-function button (MFB)
• 5. Power switch
• 6. LED indicator
• 7. Micro USB charging port
• 8. AUX in port
• 9. USB slot
• 10. Micro SD card slot

Packing List

• Bluetooth speaker * 1
• Dual 3.5mm audio cable *1
• Charging cable *1
• User manual *1
• Certificate of quality *1

Getting Started

Power ON/OFF

Power ON: Turn the power switch to "on". The LED indicator lights up blue for 3 seconds.

Power OFF: Turn the power switch to "off".

Bluetooth Connection

1. Turn on the Bluetooth speaker. The LED indicator flashes blue continuously, indicating it's ready for pairing.
2. Activate the Bluetooth function on your phone and search for "HAVIT SK802BT". Tap to connect. The LED indicator will turn solid blue upon successful connection.
3. The speaker automatically reconnects to the last paired device when both Bluetooth is active on your device and the speaker is turned on.

Call Functions

• Answer Incoming Calls: Press the MFB button once.
• End Call: Press the MFB button once.
• Refuse Incoming Calls: Long press the MFB button for 2 seconds.
• Last Number Redial: Double press the MFB button.

Note: Some mobile phones may require manual setting to answer calls via the speaker. Refer to your phone's instructions.

Mode Switching

Short press the 'M' button to cycle through modes: Bluetooth, Micro SD card, AUX in, USB, FM.

Micro SD Card Mode

Insert a Micro SD card. The speaker will automatically recognize it (with a voice prompt) and play music. Supports up to 32GB.

AUX Mode

Connect your music player or phone to the speaker using the provided dual 3.5mm audio cable. The speaker will automatically recognize the connection.

USB Mode

Insert a USB disk. The speaker will automatically recognize it (with a voice prompt) and play music.

FM Mode

1. Insert the provided micro USB cable into the speaker's micro USB slot to act as an antenna.
2. Turn on the speaker and press the MFB button once to enter FM mode.
3. Long press the Play/Pause button for 2 seconds to start automatic channel searching.
4. Long press the Play/Pause button for 2 seconds again to stop the search.
5. Long press the '-' or '+' buttons to select a channel.

Music Playing Controls

• Short press MFB: Pause/Play
• Long press '-': Previous track / Volume down
• Long press '+': Next track / Volume up
• Short press '-': Volume down
• Short press '+': Volume up

True Wireless Stereo (TWS)

Connect two SK802BT speakers for a stereo and surrounding audio effect.

1. Ensure Bluetooth is OFF on your mobile device.
2. Turn on both speakers.
3. On either speaker, long press the 'M' button for 2 seconds. A melody will play, indicating TWS pairing mode. The LED on the right channel speaker will become solid blue, and the LED on the left channel speaker will flash.
4. Activate Bluetooth on your phone and search for "HAVIT SK802BT". Connect manually. Both speaker LEDs will turn solid blue upon successful TWS connection.
5. Important: TWS pairing must be completed *before* connecting to your mobile device.

Specifications

• Bluetooth Version: V5.0
• Output Power: 5W * 2
• Battery: 1800 mAh
• Playing Time: 8 Hours
• Charging Time: 2-3 Hours
• Wireless Working Range: 10 Meters
• Speaker Size: 57mm
• SNR: ≥80dB
• Frequency Response: 20Hz-20KHz
• Input Voltage: DC 5V/1A
• Support: BT, TF, USB, FM, AUX, TWS
• Material: ABS

Charging

Use the provided micro USB cable to charge the speaker. The power LED indicator lights up red while charging and turns off when charging is complete.

• Charging voltage and current: 5V/1A. Please use input power below 5V/1A.
• Use chargers certified by reputable manufacturers.
• Battery performance may decrease with repeated charging and use; this is normal for rechargeable batteries.

Warnings

• Follow instructions for operation.
• Charge the product with input power below 5V/2.4A to protect the battery.
• Do not use or immerse the product near water. Avoid splashing liquid on it.
• Store and use the product in a normal temperature environment.
• Keep the product away from heat sources like radiators, hot air regulators, stoves, or other heat-generating instruments. It is not high-temperature resistant.
• Do not block the product's ports (charger port, LED port, microphone, etc.).
• To protect your hearing and extend speaker life, avoid prolonged use at maximum volume.
• If the speaker system halts, long press the MFB to reset and power off.
• For any product damage, contact after-sales staff promptly instead of attempting self-repair to ensure continued after-sales service.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.