HAVIT SK889BT Multi-Color Ambient Light Bluetooth Speaker

Packing List

• Bluetooth speaker x1
  (Illustration of a HAVIT Bluetooth speaker)
• Type-C Charging Cable x1
  (Illustration of a Type-C charging cable)
• User manual x 1
  (Cover of the HAVIT User Manual)
• Certificate of quality x1
  (Cover of the HAVIT Certificate of Quality)

Product Structure

The speaker has the following components:

1. Previous/Volume -
2. Next/Volume +
3. Play/Pause and Mode switching
4. Power button/Light mode switch
5. TF card port
6. Charging port

(Diagram showing the top view of the speaker with buttons labeled 1-4.)

(Diagram showing the bottom view of the speaker with ports labeled 5-6.)

Power ON/OFF

1. Long press the power button for three seconds to turn on.
2. Long press the power switch for three seconds to turn off.

Bluetooth Connection

1. Turn on the Bluetooth speaker; the breathing light flashes slowly.
2. Activate the Bluetooth on your phone and search for "HAVIT SK889BT". Click manually to connect.
3. The speaker can automatically reconnect to the last paired device. When your device's Bluetooth turns on, the speaker will automatically reconnect.

Answering Incoming Calls

Press the power button to answer incoming calls.

Tip: Some mobile phones default to answering calls via their own receiver. Please refer to your phone's instructions to set this up.

Call Management

• End the call: Press the power button once to end the current call.
• Refuse incoming calls: Long press the power button for 2 seconds to reject an incoming call.
• Last number redial: Dual press the power button to redial the last calling number.

Mode Switching

Long press the play/pause button to select the mode: (Bluetooth / TF card / FM).

Light Effect Switching

Short press the power button to switch the light effect of the speaker. There are four lighting modes.

Micro TF Card Mode

Insert a TF card; the speaker will automatically recognize and broadcast MP3 format music.

FM Mode

1. Insert the provided Type-C cable into the speaker's micro USB slot to act as an antenna. Long press the play/pause button to enter FM mode.
2. Dual press the play/pause button to activate automatic channel search.
3. Dual press the play/pause button again for 2 seconds to stop the search.
4. Long press the "+" / "-" buttons to select a channel.

Clearing Pairing Records

Press the play/pause button three times to clear the pairing records.

Music Playing

• Short press the play/pause button to pause/play.
• Long press the "-" button for PREV (previous track).
• Long press the "+" button for NEXT (next track).
• Short press the "-" button for VOL - (volume down).
• Short press the "+" button for VOL + (volume up).

True Wireless Stereo (TWS) Fit for Two SK889BT Speakers

You can connect two SK889BT speakers for a pair for stronger stereo and surrounding effect.

1. Ensure the Bluetooth function is OFF on your Bluetooth player.
2. Turn on two speakers.
3. Double-click the play/pause button of one speaker (the host). You will hear a "dong" sound. Wait about 1 minute after the prompt sound. A "di" sound will indicate successful pairing.
4. Activate Bluetooth on your phone and search for "HAVIT SK889BT". Click manually to connect.
5. Double-click the play/pause button again to disconnect TWS.

Charging

1. As the product has a built-in non-removable and rechargeable battery, please use the provided Type-C cable to charge.
2. Please choose a charger certified by the manufacturer.

The battery performance may decrease with repeated charging and use, which is normal for rechargeable batteries.

The power LED lights up red when charging and turns off when charging is complete.

Specifications

Warnings

1. Please follow the instructions for operation.
2. Please charge the product with an input power below 5V/1A to protect the battery.
3. Do not use this product near water. Do not immerse it in any liquid or splash liquid on it.
4. Store or use the product in a normal temperature environment.
5. Keep the product away from heat sources like radiators, hot air regulators, stoves, or other heat-generating instruments, as it is not high-temperature resistant.
6. Do not block the product's ports, such as the charger port, LED port, and microphone.
7. To protect your hearing and extend the speaker's service life, it is not recommended to use the maximum volume level for extended periods.
8. For any product damage, please contact after-sales staff promptly instead of attempting self-repair. Otherwise, you will forfeit after-sales service.

FCC Compliance

Any changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Printing Information

Material: 128g double copper paper, double-sided printing, accordion fold.

Printing color number: C:0 M:0 Y:0 K:70

Size: 55 X 77 mm