Product Overview
This document provides essential information for the Philips LED Retrofit Kit (RDL6), designed to upgrade existing luminaires. It details installation procedures, safety precautions, and compatibility requirements for optimal performance.
Key Features & Compatibility
- Suitable for luminaires with or without insulation contact (IC or Non-IC).
- Dimming functionality is exclusively controlled via the WiZ app; not compatible with other dimmers.
- Minimum lamp compartment dimensions required: 135mm (5-inch) diameter x 190mm (7.5-inch) height for 5-inch recessed luminaires, and 154mm (6-inch) diameter x 190mm (7.5-inch) height for 6-inch recessed luminaires.
Important Safety Warnings
Installation requires knowledge of luminaire electrical systems. If unqualified, do not attempt installation; contact a qualified electrician.
- Risk of fire or electric shock.
- Ensure the retrofit kit's input rating does not exceed the luminaire's input rating.
- Do not make or alter any open holes in the enclosure during installation.
- Prevent wiring damage or abrasion by avoiding sharp edges.
Installation Steps Summary
Installation involves turning off power, removing the old fixture components, preparing the housing, connecting the new kit, and securing it flush with the ceiling. Refer to the detailed diagrams and instructions within the manual for precise steps.
