UGREEN PB572 Magnetic Wireless Power Bank
Product Overview
This document provides user instructions and technical specifications for the UGREEN PB572 Magnetic Wireless Power Bank.
Cautions
Please read all instructions and safety information before using the product. The document mentions general cautions related to product usage.
Button Operation
Details on how to operate the buttons on the power bank are provided. The document refers to a "SELECT" button, indicated by "[SELECT]".
Recharging Your Power Bank
Instructions are included for recharging the power bank itself. The document mentions "Recharging Your Power Bank" and "Wired Charging" as modes of operation.
Charging Your Devices
Instructions are provided on how to charge external devices using the power bank. The product is described as a "Magnetic Wireless Power Bank", implying wireless charging capabilities.
Specifications
The document details various specifications including material, printing color, dimensions, tolerances, and ink requirements.
- Material: 80G glossy coated paper (哑粉纸) or 80g white kraft paper (白牛皮纸).
- Printing Color: 1C (One color).
- Forming Size: 60x85mm (Page 1) or 60x80mm (Page 2).
- Unfolded Size: 660x170mm (Page 1) or 540x80mm (Page 2).
- Size Tolerance: ±1 mm (Page 1) or ±0.5 mm (Page 2).
- Printing Offset: <=0.5 mm.
- Registration Offset: <=0.35 mm.
- Forming Process: Accordion fold (风琴折).
- Ink Requirements: Mineral oil content in printing ink must meet specific limits for MOSH and MOAH.
Dimensional Tolerances Table
| Dimension Range (mm) | Tol. A | Tol. B | Tol. C | EPS | EPE | EPP | BAG | CTN | LABEL | SHEET | UNIT |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0~6 | 0.05 | 0.05 | 0.10 | mm | |||||||
| 6~30 | 0.10 | 0.15 | 0.20 | 0.50 | 0.50 | 0.50 | 3.00 | mm | |||
| 30~120 | 0.15 | 0.20 | 0.30 | 0.50 | 0.50 | 0.50 | 5.00 | 1.00 | 0.25 | mm | |
| 120~300 | 0.20 | 0.30 | 0.40 | 1.00 | 1.00 | 1.00 | 10.00 | 1.00 | 0.30 | mm | |
| 300~450 | 0.25 | 0.40 | 0.50 | 2.00 | 2.00 | 2.00 | 15.00 | 2.00 | 0.50 | mm | |
| 450~600 | 0.30 | 0.50 | 0.60 | 3.00 | 3.00 | 3.00 | 20.00 | 3.00 | 0.80 | mm | |
Critical Dimension Mark: ±0.20*
Manufacturer: UGREEN Group Limited (第三方公司).
Compliance and Certifications
The product and packaging materials comply with several international standards:
- EU Packaging Directive 94/62/EC
- US TPCH (Toxics in Packaging Clearing House)
- EU REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals)
The device also carries compliance marks indicating adherence to various regulations:
- FCC Statement: The device complies with Part 15 of the FCC Rules.
- CE Marking: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
- WEEE Directive: Information is provided for the proper disposal of electrical and electronic equipment to prevent environmental harm. Symbols are used to guide disposal in Europe and other regions.
- UK Declaration of Conformity: Confirms compliance with UK regulations.
Warranty Information
Warranty information for the product is available, covering purchased products.
Packaging Layout Description
The document includes diagrams illustrating the flat layout for product packaging. These diagrams show various die-cutting lines, including cut lines (裁切线), crease lines (压痕线), V-groove lines (V槽线), half-cut lines (半穿刀), auxiliary lines (辅助线), tooth cut lines (牙刀), and draw lines (画线). Views of the outer surface (外表面视图) and inner surface (内表面视图) of the packaging are depicted.
