UGREEN Magnetic Wireless Power Bank 10000 mAh

Product Overview

This document provides instructions and information for the UGREEN Magnetic Wireless Power Bank 10000 mAh, Model PB195.

Key components:

• Wireless charging area: Designed for MagSafe-enabled iPhones and compatible cases.
• Power button: Used to turn the device on/off and check battery status.
• USB-C input/output: For charging the power bank and outputting power to devices.
• USB-A output: For outputting power to devices.
• Power indicator lights: Four LEDs indicate the remaining battery level.
• Holder: A built-in stand to prop up your phone while charging wirelessly.

How to Use

Power Button Functions

• Power On: Press the power button once.
• Power Off: Press the power button twice. The device will automatically power off if no external device is connected for 30 seconds.
• Check Battery Level: Press the power button once. The indicator lights will show the remaining battery level:
  • 10% remaining: One light solid.
  • 25% remaining: Two lights solid.
  • 50% remaining: Three lights solid.
  • 75% remaining: Four lights solid.
  • 100% remaining: All four lights solid.
  • Low battery: Lights may flash.
• Low-current Charging: Press and hold the power button for 3 seconds. The indicator lights will flash one by one. This mode is suitable for low-power devices like Bluetooth earbuds. The product will automatically exit low-current charging after 2 hours, or you can press the power button once to exit manually.

Wireless Charging

Align your MagSafe-compatible device with the wireless charging area on the power bank. The device will attach magnetically. Charging may take a few seconds to initiate.

Wired Charging

Connect your device to the USB-C or USB-A port using a compatible charging cable. If the product fails to discharge, press the power button once.

Understanding Battery Capacity and Rated Capacity

Battery Capacity refers to the total charge stored by the battery (e.g., 10000mAh at 3.7V). Rated Capacity is the actual output capacity after accounting for voltage conversion and energy loss during charging. For example, a 10000mAh power bank with 3.7V battery voltage and 90% efficiency, converting to a 5.1V output, would have a rated capacity of approximately 6529mAh (10000mAh * 3.7V * 0.9 / 5.1V).

Factors like ambient temperature and battery chemistry can also affect charging performance.

Specifications

Package Contents

• 1 × Power Bank
• 1 × Charging Cable
• 1 × User Manual

Important Safety Instructions and Warnings

• Fully charge the product before its first use.
• Do not use incompatible power adapters or USB cables, as this may cause fire, explosion, or other hazards.
• Do not store the product in areas with limited ventilation, such as a handbag, as this may lead to fire or other hazards.
• The product contains a Lithium-ion battery. Do not attempt to disassemble, modify, or repair the product yourself, as this may cause property damage or fire.
• Do not drop, crush, puncture, short-circuit, or dispose of the product in fire or water.
• Dispose of the product according to local regulations.
• Do not use the product during thunderstorms, as it may cause malfunctions or electric shocks.
• If the battery is swollen, leaking, or deformed, stop using the product immediately.
• If the product has been submerged in water, stop using it immediately.
• Keep out of reach of children.
• When not in use for extended periods, store the product in a dry environment and recharge/discharge it every 3 months to preserve its lifespan.
• Wireless charging may take a few seconds to start; please wait patiently.

Compliance Information

FCC Radiation Exposure Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician.

Industry Canada Compliance: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

Dimensional Tolerances

The following table outlines the dimensional tolerances for the product:

DRAFT TOLERANCE: ±0.20°

CRITICAL DIM. MARK: *