Package Contents
The package includes:
- User Manual x 1
- HDTV Antenna x 1
Instructions
I. Antenna Connection
Connect to Set-Top Box (STB)
Connect the antenna to the ANT/IN or CABLE IN port on the back of the Set-Top Box (STB) using the coaxial cable. Connect the amplifier's USB port to a 5V DC power source (e.g., USB port on STB or a USB adapter).
Connect directly to HDTV
Connect the antenna to the ANT/IN or CABLE IN port on the back of the HDTV using the coaxial cable. Connect the amplifier's USB port to a 5V DC power source (e.g., USB port on HDTV or a USB adapter).
Power Supply Selection
The amplifier requires a 5V/500mA USB power supply. Use the USB port on your TV or Set-Top Box, or a separate USB power adapter.
II. Antenna Mounting
The antenna can be mounted vertically or horizontally. The base contains magnets for attaching to iron surfaces.
Tips:
- The antenna has magnets that attach to iron objects.
- Experiment with different directions and positions for optimal reception.
- Try placing the antenna vertically and horizontally, then scan for channels to find the best orientation.
III. Scan for Channels
- In your TV's setup menu, select 'Antenna' or 'Air' mode. Consult your TV manual for specific instructions.
- Initiate the channel scan function (often labeled 'Auto-Program', 'Channel Search', or 'Channel Scan') in your TV's setup menu. Consult your TV manual for detailed instructions.
IV. How to use this switch?
The amplifier has a switch to adjust gain based on signal strength:
1. Red light condition (Far from the signal tower)
Use this setting for high gain. Toggle the switch to this position if the signal is weak due to distance from the transmitter tower.
2. Green light condition (Close to the signal tower)
Use this setting for low gain. Toggle the switch to this position when you are close to the signal transmitting tower. If the signal is poor in this mode, switch to the red light (high gain) position.
Remark: If signals are not received with the amplifier, try the low gain setting. In some cases, especially near broadcast towers, the amplifier might cause self-oscillation, interfering with reception.
FAQ
Q: Will all the channels I receive be High Definition (HD)?
A: Not all digital signals are High Definition (HD). Ensure you are using a High Definition Television (HDTV) with a built-in ATSC tuner. If using a third-party receiver, confirm it supports HD reception.
Q: Can you put the antenna behind the TV?
A: Yes, but it may not be ideal. The TV can block signals, weakening reception.
Q: Are channel lineups available?
A: Channel reception depends on factors like distance to transmitting antennas, your height, terrain, and obstructions. Use your TV's scan function to see available channels. For an estimate of available channels in your area, visit dtv.gov/maps and enter your address.
Q: Is this just like a freeview box?
A: No, this is an aerial that connects to a TV with freeview capabilities. It allows for TV placement anywhere without extensive cabling.
Q: How many channels can I receive?
A: The number of channels depends on local broadcasts and your location's terrain (including buildings, hills, trees). Fewer obstructions lead to better signal reception. Visit dtv.gov/maps for a list of likely channels in your area.
Troubleshooting
- Verify the antenna is correctly connected to your HDTV or HD receiver.
- Reposition the antenna. Try a higher location, near a window, or facing the broadcast tower. Signal strength varies with distance, hills, buildings, and trees. Always re-scan channels after moving the antenna.
- If a channel is missing, try rotating the antenna 10-20 degrees or moving it, then re-scan.
- Frozen picture or pixelation often indicates a weak or intermittent signal. Move the antenna or aim it towards the broadcast tower for that channel.
- Ensure your TV or receiver supports HD reception if you expect HD channels.