Declaration of Conformity
We Hereby, Declare that the essential requirements set out in the Directive 2014/53/EU have been fully fulfilled on our product with indication below:
1. Manufacturer
Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Address: Room 402, Building 6, No. 8 Huamei Road, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China, 518105
2. EU Authorized Representative
Name: eVatmaster Consulting Gmbh
Address: Raiffeisen Street2B11, 63110 Rodgau, Hessen, Germany
Email Address: contact@evatmaster.com
3. Product Info
Product Name: Smart Plug
Model No.: ET29
Brand Name: EIGHTREE
Asin: B0CHMLN7L9 B0CHML5B2R
4. Applied Standard and Test Report
The submitted product have been tested (By Shenzhen BANTEK Testing Co., Ltd.) with the listed standards and found in compliance with the following standard :
- EN 300 328 V2.2.2
- EN 301 489-1 V2.2.3
- EN 301 489-17 V3.2.4
- EN 55032:2015+A11:2020
- EN 55035:2017+A11:2020
- EN 61000-3-3:2013+A2:2021
- EN IEC 61000-3-2:2019+A1:2021
- EN IEC 62311:2020
- DIN VDE 0620-2-1/A1 (VDE 0620-2-1/A1):2023-09
- EN IEC 61058-1:2018
- EN 61058-1-1:2016/AC:2019
- EN 61010-1:2010/A1:2019/AC:2019
5. CE marking
CE
6. Technical Construction File (TCF) and Test Reports
Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection.
7. This declaration of conformity is issued under the sole responsibility of the manufacturer.
Company Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Contact Person: Wen Yuanyuan
Position: Manager
Date: 2025/4/21
Signature: Wen Yuanyuan