Intesis 700series Air Application Wiring Diagrams for Panasonic IN770PAN
This document provides wiring diagrams for Intesis 700series Air gateways, enabling connectivity between Panasonic air conditioning units and various building automation protocols.
IN-BAC-PA: Panasonic to BACnet
The IN-BAC-PA model facilitates communication between Panasonic AC units and BACnet networks using the MSTP protocol.
The Intesis 700series Air gateway features a terminal block for connections. The following terminals are available:
- Terminal 1: Power Supply (12-36VDC / 24VAC)
- Terminal 2: BACnet MSTP (for BACnet MS/TP communication)
- Terminal 3: Not used
- Terminal 4: BACnet IP & Console (for BACnet IP communication and console access)
- Terminal 5: Panasonic (P-Link) (connects to the Panasonic AC unit)
- Terminal 6: Not used
- Terminal 7: Not used
- Terminal 8: Console (for console access)
- Terminal 9: Binary inputs (optional, for dry contact devices)
The gateway unit itself is depicted with an Ethernet Port and a USB port.
IN-KNX-PA: Panasonic to KNX
The IN-KNX-PA model enables communication between Panasonic AC units and KNX building automation systems.
The Intesis 700series Air gateway features a terminal block for connections. The following terminals are available:
- Terminal 1: Power Supply (12-36VDC / 24VAC)
- Terminal 2: Not used
- Terminal 3: KNX (for KNX bus communication)
- Terminal 4: Console (for console access)
- Terminal 5: Panasonic (P-Link) (connects to the Panasonic AC unit)
- Terminal 6: Not used
- Terminal 7: Not used
- Terminal 8: Console (for console access)
- Terminal 9: Binary inputs (optional, for dry contact devices)
The gateway unit itself is depicted with an Ethernet Port and a USB port.
IN-MBS-PA: Panasonic to Modbus Server
The IN-MBS-PA model allows Panasonic AC units to communicate with Modbus servers via RTU and TCP protocols.
The Intesis 700series Air gateway features a terminal block for connections. The following terminals are available:
- Terminal 1: Power Supply (12-36VDC / 24VAC)
- Terminal 2: Modbus RTU (for Modbus RTU communication)
- Terminal 3: Not used
- Terminal 4: Modbus TCP & Console (for Modbus TCP communication and console access)
- Terminal 5: Panasonic (P-Link) (connects to the Panasonic AC unit)
- Terminal 6: Not used
- Terminal 7: Not used
- Terminal 8: Console (for console access)
- Terminal 9: Binary inputs (optional, for dry contact devices)
The gateway unit itself is depicted with an Ethernet Port and a USB port.
IN-WMP-PA: Panasonic to Home Automation
The IN-WMP-PA model integrates Panasonic AC units with Home Automation systems.
The Intesis 700series Air gateway features a terminal block for connections. The following terminals are available:
- Terminal 1: Power Supply (12-36VDC / 24VAC)
- Terminal 2: Not used
- Terminal 3: Not used
- Terminal 4: Home Automation & Console (for Home Automation system communication and console access)
- Terminal 5: Panasonic (P-Link) (connects to the Panasonic AC unit)
- Terminal 6: Not used
- Terminal 7: Not used
- Terminal 8: Console (for console access)
- Terminal 9: Binary inputs (optional, for dry contact devices)
The gateway unit itself is depicted with an Ethernet Port and a USB port.
