Midea Commercial & VRF Systems to Home Automation Application
URL: https://www.intesis.com/products/ac-interfaces/midea-gateways/midea...
Introduction
The Midea Application has been specially designed to allow bidirectional control and monitoring of Midea Commercial & VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single Interface.
Features
- UL Listed [UL Listed].
- Direct access to outdoor unit's communication bus.
- Scan: Automatic identification of the units present on the VRF system.
- Integration with any IP Home Automation System thanks to our open ASCII protocol.
- Compatible with the drivers available at Intesis webpage.
- Direct ethernet connection to the home's local IP network.
- Up to 6 TCP clients (incoming sockets) are supported.
- Configuration through IP or USB (Console) port.
- Easy integration with Intesis MAPS.
- Automatic updates for both Intesis MAPS and interface's firmware.
Use Case
Integration of Midea Commercial & VRF systems into a Home Automation installation.
Diagram Description: The diagram illustrates the integration of Midea Commercial & VRF systems into a Home Automation setup. It shows multiple Midea indoor units connected to a Midea VRF system. This VRF system is linked via an Intesis Gateway to a Home Automation system. The Home Automation system is depicted interacting with various smart home devices such as lights, thermostats, and media players. The Intesis Gateway is shown with a [UL Listed] certification mark.
Description
Direct Connection to Indoor Units
The gateway is wired directly to an indoor or outdoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint...but the monitoring of errors, alarms and some internal variables.
Fast and Easy to Set Up by DIP-SW
The product can be installed and set up in a really short time. It's only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required.
Technical Documentation
| Document | Description | Action |
|---|---|---|
| User Manual | General information about this product | Download |
| Installation Manual | Learn how to install the device in your project | Download |
| Application Wiring Diagram | Review your specific application wiring diagram | Download |
| Protocol Specifications | This document contains the basis of the WMP protocol | Download |
| HVAC Compatibility tool | Find the appropriate solution for your HVAC integration | Open |
| EC Declaration of Conformity | Check the product certification | Download |
| UKCA Certification | Check the product UKCA Certification | Download |
| Recommendations to avoid polarity issues | How to avoid polarity issues in RS485 Networks | Learn more |
Programming Tools
| Tool | Description | Action |
|---|---|---|
| Intesis MAPS | Get access to download the configuration software tool | Download |
| Intesis MAPS User Manual | General information about Intesis MAPS | Download |
| eLearning course | Learn the secrets of Intesis MAPS | Enroll now |
Commercial Documentation
| Document | Description | Action |
|---|---|---|
| Marketing Datasheet | Discover all the integration solutions for Midea | Download |
| Intesis Brochure | Know more about the Intesis current available products | Download |
Drivers for WMP AC Interfaces
| Driver | Description | Action |
|---|---|---|
| Intesis - AMX driver | Download | |
| Intesis - Control 4 driver | Download | |
| Intesis - Crestron driver | Download | |
| Intesis Eedomus driver | Download | |
| Intesis - ELAN driver | Download | |
| Intesis - FIBARO driver | Download | |
| Intesis - Iridium driver | Download | |
| Intesis - Jeedom driver | Download | |
| Intesis - RTI driver | Download | |
| Intesis - Savant driver | Download | |
| Intesis - VERA driver | Download |
Order Codes
| Order Code | Description |
|---|---|
| IN770AIR00S0000 | Intesis multi-brand AC interface with KNX, Serial and IP support - Up to 16 Indoor Units |
| IN770AIR00MO000 | Intesis multi-brand AC interface with KNX, Serial and IP support - Up to 64 Indoor Units |
The order code can differ depending on the product seller and the buyer's location.
Included Components
- Intesis Gateway.
- Installation Manual.
- USB Configuration cable.
- (Power supply not included).
Warranty: 36 months.
