Omni 30C+ User Manual

Before Using the Omni 30C+

Battery Calibration

To ensure accurate battery readings, calibrate the battery when you first receive the product and periodically thereafter.

1. Fully discharge the OmniCharge until it cannot power on. The screen will display an empty battery icon.
2. Fully charge the OmniCharge to 100%. The screen will display a full battery icon.

Note: When not in use, store the OmniCharge at full battery and recharge it at least every 3 months to prevent over-depletion. Failure to do so may cause battery malfunction, which is not covered by warranty.

Screen

OLED Screen

The Omni 30C+ features an OLED screen that displays real-time metrics.

Button Functions

Primary Controls

• Power Button: Long press to power On/Off.
• Up Button: Navigates to DC Outlet settings.
• Down Button: Navigates to USB/Wireless settings.

Menu Controls

• Double Press Power Button: Enter the menu.
• Quick Press Power Button: Select an option.
• Up Button: Move up in menus.
• Down Button: Move down in menus.

Charging Capabilities

Wireless Charging

• Max Output: 10W
• Charging Phones: Place your phone on the '+' icon on top of the Omni 30C+ for fast wireless charging. For optimal performance, align your phone horizontally in the center.
• Charging Earbuds: Place compatible wireless charging earbuds on the '□' icon.
• Charging Smartwatches: Place your smartwatch horizontally on the '○' icon. A flashing wireless icon indicates detection.

Note on Wireless Charging Alignment: The optimal charging range may vary based on your device's receiver coil size. Minor alignment deviations can cause charging interruptions. If this occurs, lift your device, wait a few seconds, and reposition it for stable wireless charging.

Ports and Output

• USB-C Ports: Max Output 100W (combined output 100W). Both USB-C ports are always active. Simply plug in your USB-C device. Note: USB-C1 and the DC port share the same power circuit and cannot be used simultaneously.
• USB-A Ports: Quick Charge QC3.0 compatible, Max Output 18W.
• DC Port: Max Output 5A - 100W. This port allows direct DC power output. Ensure you know your device's voltage and amperage requirements and use a compatible cable. Warning: Using the incorrect voltage may damage your device.

Enabling DC Output

To enable DC Output:

1. Navigate to 'DC OUT' in the menu.
2. Select the desired voltage and amperage preset. You can customize these by long-pressing the power button while selecting a preset.
3. A DC icon will appear on the screen once active.

Recharging Your Omni 30C+

• Via USB-C1 Port: Max input of 45W. Connect a USB-C wall charger. If charging doesn't start, try plugging in the charger while the Omni 30C+ is turned off.
• Via Barrel Port: DC Input 5V - 25V, up to 3A (5W - 45W). Use a compatible charger with a 5.5 x 2.5mm connector. Note: USB-C1 and the DC port cannot be used simultaneously for charging.

Recharging Times (Approximate):

• AC Wall Charger: 3-4 hours
• Solar (up to 45W): 3-6 hours
• Car Power Port (12V): 3-6 hours
• Laptop Adapter: 3-4 hours

Pass-Through Charging

The Omni 30C+ supports pass-through charging, allowing you to power devices while the Omni 30C+ itself is being recharged. You can input power via USB-C or the DC port and output to USB-A or wireless charging.

Screen Icons

• USB-C Output: Indicates USB-C output is active.
• Solar Charging: Indicates charging from solar power.
• Adjustable DC Output: Indicates adjustable DC output is active.
• Wireless Charging: Indicates wireless charging is active.
• Low Temperature Protection: Battery temperature is too low; charging circuit is off.
• Overpower Protection: Device is drawing too much power; output is limited or cut off.
• Low Power Protection: Voltage is higher than input and battery is empty; unit will not power until sufficient charge is reached.

Menu Navigation

Access the menu by double-pressing the power button. Use the up/down buttons to navigate and the power button to select.

1. DC OUT: Turn on DC output and adjust voltage/amperage.
2. USB: Choose whether USB-A ports are On/Off at startup (default: On).
3. SCREEN OFF: Set screen auto-off timer (default: 5 min).
4. AUTO SHUT DOWN: Set device auto-shutoff timer (default: 5 min).
5. TEMPERATURE: Select temperature display unit (°C or °F).
6. BUTTON LIGHT: Toggle button lights On/Off (default: On).
7. TIME REMAINING: Choose whether to display estimated time remaining.
8. LANGUAGE: Select the display language.
9. FACTORY RESET: Reset the Omni 30C+ to factory default settings.
10. ABOUT: View model name, capacity, firmware version, and serial number.

Safety & Handling

• Use only with appropriate devices. Check device packaging for compatibility. OmniCharge is not responsible for damages to devices incurred through improper use.
• Set up on a hard, flat, stable surface for proper ventilation and to prevent falls.
• Avoid high-temperature environments (direct sunlight, inside hot vehicles, near heaters).
• Do not expose to strong shocks, punctures, fire, liquids, moisture, or corrosive chemicals.
• If the unit does not turn on or displays a warning, stop use and contact support@omnicharge.co.
• The AC output generates household-level AC power; handle with care. Do not insert foreign objects into outputs or vents.
• The Omni 30C+ is not user-serviceable. Do not attempt repairs or modifications, as this can damage the battery and cause hazards.
• Dispose of the device according to local environmental regulations or contact OmniCharge for assistance.

Battery Maintenance

The Omni 30C+ uses lithium battery cells with a limited number of cycles. To maximize battery life:

• Avoid leaving the device constantly charging without use.
• Do not leave the Omni 30C+ unused for extended periods. Recharge at least once every three months.
• Follow handling and storage guidelines to prevent unnecessary battery depletion.
• Batteries depleted due to misuse, abuse, age, or improper maintenance are not covered by warranty.

Battery Health Monitoring

The Omni 30C+ features a dynamic battery health and power monitoring system that adjusts charging and power output based on battery conditions and environment. You will receive on-screen notifications before the device reaches the end of its lifespan.