Welcome to the Shark FlexStyle™ Styling Guide. This document will help you understand and use your Air Styling & Drying System to achieve various looks.
How it Works
The Shark FlexStyle™ is designed for versatile styling and drying. Understand its core functions and controls:
Controls:
? Airflow: Low / Medium / High
?️ Temperature: No Heat / Low / Medium / High
? On/Off: [Power Button]
❄️ Cool Shot: Press and hold Cool Shot as desired to seal the hair cuticle and lock in your styles.
Device Operation:
- Styler Attachment Location: Push styler onto the nozzle until it clicks.
- Styler Lock: Slide lock down to unlock the styler so it can be removed.
- Hinge Latch: Slide latch down and rotate the nozzle left to switch to the hair dryer mode.
TIP: All 3 red Temperature lights will be OFF when Cool Shot is engaged.
Table of Contents
Transform from Styler to Dryer
The Shark FlexStyle™ can easily switch between styling wand mode and hair dryer mode. The device rotates to change modes.
Styling Wand Mode / Hair Dryer Mode:
- Attach in Wand Mode: Accessories connect to the front of the device.
- Attach in Dryer Mode: Accessories connect to the end of the device, which functions as a dryer nozzle.
Get to Know Your Stylers
The Shark FlexStyle™ comes with or is compatible with several attachments, each designed for specific styling needs:
SOLD SEPARATELY (for Curl-Defining Diffuser)
Cool Touch Locations:
Hold these accessories by the tip when removing them.
Hold the Cool Touch location to remove the accessory after use.
Hold these accessories by the sides when removing them.
Auto-Wrap Curlers
Recommended Setting: ? Air, ?️ Temp
Create beautiful curls effortlessly:
- Begin with slightly damp hair. Separate the top and bottom sections of your hair. Pro Tip: Apply hair products or styling agents as desired.
- Select the direction of the curls by choosing the corresponding barrel: Left Barrel (Recommended for left side of head, Counterclockwise Curl) or Right Barrel (Recommended for right side of head, Clockwise Curl).
- Hold the middle of a ½-inch-to-1-inch section of hair. Let the ends dangle. Pro tip: Grab a section of hair that is a consistent length.
- Turn on the styling wand. Bring the barrel behind the dangling ends. The ends will automatically wrap around the barrel - no need to manually wrap.
- Once the ends wrap, let go of the hair section and slowly bring the barrel directly to the roots, allowing the hair to continue to wrap itself around the barrel. No need to twist the wand.
- For best results and to avoid heat damage, hold the barrel in place for 10 seconds, then press and hold the Cool Shot button ❄️ for at least 10 seconds. Repeat as needed until hair is dry. Turn off the styling wand and pull the barrel straight down to reveal your curl! Pro Tip: Use a setting or holding spray as desired for an even longer-lasting look.
Additional Styling Tips:
- Take smaller sections and make sure your hair isn't too wet if it is having difficulty wrapping around the barrel.
- Use sectioning clips to prevent unwanted hair from being wrapped around the barrel.
- Test different moisture levels to understand the level of moisture that works best for your hair type.
- For curly or coily hair, prep your hair for curling by lengthening it using the paddle brush or oval brush.
Oval Brush
Recommended Setting: ? Air, ?️ Temp
Achieve voluminous, smooth styles:
- Begin with rough-dried or towel-dried hair. Pro Tip: Apply hair products or styling agents as desired.
- Section your hair as desired. For voluminous blowouts, start by placing the round brush under the hair close to the roots. Pro Tip: For even more volume, hold the brush under your hair close to the roots for 3 seconds before brushing outwards.
- Roll the brush outwards from the roots to the ends to engage the bristles and gently grip the hair. Pro Tip: For extra volume, brush your hair in an upward direction.
- Repeat on remaining sections until hair has been dried into a bouncy, voluminous style. Pro Tip: Set your style and help reduce frizz by pressing the Cool Shot button ❄️.
Additional Styling Tips:
- If you have fine hair, try reducing the airflow to help cut down on frizz.
- If you have thick hair, try increasing the heat for even faster results.
- If you have curly or coily hair, try increasing the heat to help achieve a straighter style.
- For an added curl, place the brush under the ends of the hair and roll the brush towards the roots to engage the bristles. Twist the hair off the brush to release the curl.
Paddle Brush
Recommended Setting: ? Air, ?️ Temp
Create perfect sleek, straight styles:
- Begin with rough-dried or towel-dried hair. Section your hair as desired. Pro Tip: Apply hair products or styling agents as desired.
- For a smooth, sleek style, start by placing the brush close to the roots to engage the detangling bristles.
- Brush down your hair, making sure to engage the smoothing bristles, and gently grip the hair. Pro Tip: Hold the ends of your hair while brushing for added tension and smoothing.
- Repeat on remaining sections until hair has been dried into a smooth, straight style. Pro Tip: Set your style and help reduce frizz by pressing the Cool Shot button ❄️.
Additional Styling Tips:
- If you have fine hair, try reducing the airflow to help cut down on frizz.
- If you have thick hair, try brushing smaller sections for smoother results.
- If you have curly or coily hair, try repeatedly brushing smaller sections and increasing the heat to help achieve a straighter style.
- For added volume, place the brush under the hair section close to the roots and brush upwards using a rounding motion.
Styling Concentrator
Recommended Setting: ? Air, ?️ Temp
Achieve master smooth, stylish blowouts:
- Begin with rough-dried or towel-dried hair. Pro Tip: Apply hair products or styling agents as desired.
- Section your hair as desired and start styling with a round brush. Rotate the concentrator so airflow is always in line with the round brush.
- Apply heat in a downward motion for smoothing. Pro Tip: Apply heat at ends for shaping and bending.
- Finish styling by setting shape at ends and pressing the Cool Shot button ❄️.
Additional Styling Tips:
- If you have fine hair, try reducing the airflow to help cut down on frizz.
- To create a curl, wrap your hair around a round brush and dry it in place using the concentrator.
- For added volume, place a round brush under the roots and brush upwards while drying with the concentrator.
- For an added curl at the ends, roll the ends of the hair onto a round brush and dry in place using the concentrator.
Curl-Defining Diffuser
Recommended Setting: ? Air, ?️ Temp
Define your natural curls:
- Begin with towel-dried hair. Working around your head, bunch curls from ends between the petals of the diffuser. Pro Tip: Apply curly hair products or styling agents as desired to wet hair.
- Bring the diffuser up to the roots. Pause and hold.
- For more volume, slide the lever to extend prongs to lift roots higher. Pro Tip: Gather hair in diffuser with prongs retracted, then extend them when you reach the roots to increase grab and maximize flow.
- If desired, flip upside down and bunch from below for extra volume. Pro Tip: Keep the integrity of your natural curls by switching between Low temp and the Cool Shot button ❄️.
Additional Styling Tips:
- Apply curly hair products to wet hair before drying to help define your curls and cut down on frizz.
- If you have thick hair, try increasing the heat for even faster results.
Looking for more inspiration, tips, and tricks?
Scan the QR code below or visit qr.sharkclean.com/flexstyle