This document provides a compatibility overview of batteries with GoodWe hybrid inverters across three system types:
- Low-voltage energy storage systems
- High-voltage energy storage systems
- Commercial and industrial energy storage systems
Only batteries listed in this document are approved for connection to GoodWe hybrid inverters, in accordance with GoodWe's limited warranty. Batteries supporting the GOODWE CAN communication protocol that are not listed here may also exist. For information on the compatibility of these batteries, please contact GoodWe technical personnel.
1) Low-voltage energy storage systems
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
GOODWE | SECU-A | SECU-A5.4L | ● | ||||||||
Lynx Home U | LX U5.4-L*1 | ● | ● | ● | ● | ● | ● | ● | |||
LX U5.4-20*2 | ● | ● | ● | ● | ● | ● | ● | ||||
LX U5.0-30*4 | ● | ● | ● | ● | ● | ● | ● | ||||
Lynx Home A | LX A5.0-10*3 | ● | ● | ● | ● | ● | ● | ● | |||
LX A5.0-30*5 | ● | ● | ● | ● | ● | ● | ● | ||||
BAT | GW14.3-BAT-LV-G10 | ● | ● |
*1. Compatibility requires ARM firmware version 11 or higher.
*2. Compatibility requires ARM firmware version 11 or higher.
*4. For compatibility, ARM firmware versions 22 or higher are required.
*4. Lynx Home U-30 batteries are compatible with ES/EM/SBP/BP series inverters. BMS version must be ≥01, meaning batteries produced after April 2025.
ES G2/SBP G2:
*2. Compatibility requires ARM firmware version 02 or higher.
*3. Compatibility requires ARM firmware version 07 or higher.
*4. Compatibility requires ARM firmware version 09 or higher.
*5. Compatibility requires ARM firmware version 09 or higher.
ES uniq 8~12kW:
*4. Compatibility requires ARM firmware version 10 or higher.
*5. Compatibility requires ARM firmware version 09 or higher.
EO 3.5~6K:
*1. For compatibility, ARM firmware versions 03 or higher are required.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
BYD | Seria Battery-Box Pro*1 | ● | ● | ● | ● | ● | ● | ● | |||
Seria Battery-Box Res*1 | ● | ● | ● | ● | ● | ● | ● | ||||
Seria Battery-Box LV*2 | ● | ● | ● | ● | ● | ● | ● | ||||
Battery-Box Premium LVL*2 | LVL 15.4 | ● | ● | ● | ● | ● | ● | ● | |||
Seria Battery-Box Premium LVS*2 | ● | ● | ● | ● | ● | ● | ● | ||||
BatteryBox LV5.0*3 | LV5.0 | ● | ● | ● | ● | ● | ● | ● | |||
BatteryBox LV5.0+*4 | LV5.0+ | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP/BP:
*1. Compatibility requires ARM firmware version 00 or higher.
*2. Compatibility requires ARM firmware version 07 or higher.
ES G2/SBP G2:
*3. Compatibility requires ARM firmware version 09 or higher.
*4. Compatibility requires ARM firmware version 09 or higher.
ES uniq 8~12kW:
*3. Compatibility requires ARM firmware version 10 or higher.
*4. Compatibility requires ARM firmware version 10 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
LG | Seria RESU LV | RESU 3.3*1 | ● | ● | ● | ● | ● | ● | ● | ||
RESU 6.5*1 | ● | ● | ● | ● | ● | ● | ● | ||||
RESU 10*1 | ● | ● | ● | ● | ● | ● | ● | ||||
RESU 12*2 | ● | ● | ● | ● | ● | ● | ● | ||||
RESU 13*2 | ● | ● | ● | ● | ● | ● | ● | ||||
RESU 6.4 EX*1 | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP:
*1. Compatibility requires ARM firmware version 00 or higher.
*2. Compatibility requires ARM firmware version 07 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
PYLON | Seria US2000*1 | US2000 | ● | ● | ● | ● | ● | ● | ● | ||
Seria US3000*2 | US3000 | ● | ● | ● | ● | ● | ● | ● | |||
Seria US2000C*1 | US2000C | ● | ● | ● | ● | ● | ● | ● | |||
Seria US3000C*2 | US3000C | ● | ● | ● | ● | ● | ● | ● | |||
Seria Force L1*2 | Force-L1 | ● | ● | ● | ● | ● | ● | ● | |||
Seria Force L2*2 | Force-L2 | ● | ● | ● | ● | ● | ● | ● | |||
Seria US5000*3 | US5000 | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP/BP:
*1. Compatibility requires ARM firmware version 00 or higher.
*2. Compatibility requires ARM firmware version 07 or higher.
*3. Compatibility requires ARM firmware version 00 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
DYNESS | Seria DYNESS-LV*1 | DYNESS-LV x1 | ● | ● | ● | ● | ● | ● | ● | ||
DYNESS-LV x2 | ● | ● | ● | ● | ● | ● | ● | ||||
DYNESS-LV x3 | ● | ● | ● | ● | ● | ● | ● | ||||
DYNESS-LV x4 | ● | ● | ● | ● | ● | ● | ● | ||||
Seria POWERBOX F*1 | POWERBOX F-2.5 | ● | ● | ● | ● | ● | ● | ● | |||
POWERBOX F-5.0 | ● | ● | ● | ● | ● | ● | ● | ||||
POWERBOX F-7.5 | ● | ● | ● | ● | ● | ● | ● | ||||
POWERBOX F-10.0 | ● | ● | ● | ● | ● | ● | ● | ||||
Seria DYNESS-LV | DL5.0C*2 | ● | ● | ● | ● | ● | ● | ● | |||
DL5.0X*3 | ● | ● | ● | ● | ● | ● | ● | ||||
A48100*4 | ● | ● | ● | ● | ● | ● | ● | ||||
POWER BOX G2*5 | POWER BOX G2 | ● | ● | ● | ● | ● | ● | ● | |||
POWER BRICK*6 | POWER BRICK | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP/BP:
*1. Compatibility requires ARM firmware version 07 or higher.
ES G2/SBP G2:
*2. Compatibility requires ARM firmware version 06 or higher.
*3. Compatibility requires ARM firmware version 07 or higher.
*4. Compatibility requires ARM firmware version 07 or higher.
*5. Compatibility requires ARM firmware version 08 or higher.
*6. Compatibility requires ARM firmware version 08 or higher.
ES Uniq:
*5. Compatibility requires ARM firmware version 09 or higher.
*6. Compatibility requires ARM firmware version 09 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
OLOID | Seria LBS051100A*1 | LBS051100A-A02 | ● | ● | ● | ● | ● | ● | ● | ||
Seria LBS051200A*1 | LBS051200A-A03 | ● | ● | ● | ● | ● | ● | ● |
ES:
*1. Compatibility requires ARM firmware version 12 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
Soluna | Seria LV (48V) Battery | Soluna 4K Pack | ● | ● | ● | ● | ● | ● | ● | ||
Soluna 5K Pack | ● | ● | ● | ● | ● | ● | ● | ||||
Soluna EOS 5K Pack | ● | ● | ● | ● | ● | ● | ● |
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
ALPHA*1 | Seria Smile5-BAT | SMILE5-BAT*2 | ● | ● | ● | ● | ● | ● | ● | ||
Seria Smile-BAT | Smile-BAT-10.1P*2 | ● | ● | ● | ● | ● | ● | ● | |||
Smile-BAT-10.3P*2 | ● | ● | ● | ● | ● | ● | ● | ||||
Smile-BAT-13.3P*3 | ● | ● | ● | ● | ● | ● | ● | ||||
Seria M48112-P | M48112-P*3 | ● | ● | ● | ● | ● | ● | ● | |||
Seria M48100-P | M48100-P*3 | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP/BP:
*1. ALPHA-ESS battery CAN communication line sequence is not compatible with GoodWe inverters. A matching solution provided by ALPHA-ESS is required.
*2. Compatibility requires ARM firmware version 10 or higher.
*3. Compatibility requires ARM firmware version 11 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
Tecloman | Seria Firefly*1 | Firefly-3.6K | ● | ● | ● | ● | ● | ● | ● | ||
Firefly-7.2K | ● | ● | ● | ● | ● | ● | ● | ||||
Firefly-10.8K | ● | ● | ● | ● | ● | ● | ● | ||||
Firefly-14.4K | ● | ● | ● | ● | ● | ● | ● | ||||
Firefly-18.0K | ● | ● | ● | ● | ● | ● | ● | ||||
Firefly-21.6K | ● | ● | ● | ● | ● | ● | ● | ||||
Firefly-25.2K | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP:
*1. Compatibility requires ARM firmware version 12 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ES | EM | SBP | ES G2 | SBP G2 | ES Uniq (8 ~ 12K) | ES Uniq (3 ~ 6K) | EO | ET LV | |||
UZENERGY | Seria L051100-A | L051100-A*1 | ● | ● | ● | ● | ● | ● | ● |
ES/EM/SBP:
*1. Compatibility requires ARM firmware version 12 or higher.
2) High-voltage energy storage systems
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ET (5-10kW)* | EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ET (40~50kW) | ||||
GOODWE | Lynx Home F*1 | LX F6.6-H | ● | ||||||||
LX F9.8-H | ● | ||||||||||
Lynx Home F PLUS+*2 | LX F13.1-H | ● | |||||||||
LX F16.4-H | ● | ||||||||||
Lynx Home F G2*3 | LX F6.4-H-20*7 | ● | |||||||||
LX F9.6-H-20 | ● | ||||||||||
LX F12.8-H-20 | ● | ||||||||||
LX F16.0-H-20 | ● | ||||||||||
LX F19.2-H-20 | ● | ||||||||||
LX F22.4-H-20 | ● | ||||||||||
LX F25.6-H-20 | ● | ||||||||||
LX F28.8-H-20 | ● | ||||||||||
Lynx C*4 | GW60KWH-D-10 | ● | |||||||||
GW100KWH-D-10 | ● | ||||||||||
GW100KWH-D-10 (Extension) | ● | ||||||||||
LX C101-10 | ● | ||||||||||
LX C120-10 | ● | ||||||||||
LX C138-10 | ● | ||||||||||
LX C156-10 | ● | ||||||||||
Lynx Home D*5 | LXD5.0-10 | ● | |||||||||
BAT*6 | GW51.2-BAT-I-G10 | ● | |||||||||
GW56.3-BAT-I-G10 | ● | ||||||||||
GW61.4-BAT-AC-G10 | ● | ||||||||||
GW92.1-BAT-AC-G10 | ● | ||||||||||
GW102.4-BAT-AC-G10 | ● | ||||||||||
GW112.6-BAT-AC-G10 | ● |
* Obejmuje serie ET: ET PLUS+, ET PLUS+ (16A)
** W tym seria EH: EH PLUS
ET/EH/BT/BH/EHB:
*1. Compatibility requires ARM firmware version 19 or higher.
*2. Compatibility requires ARM firmware version 23 or higher.
*3. For compatibility, ET/BT series require ARM25 and DSP09 or higher versions; EHB series require ARM25 and DSP 03 or higher versions; EH/BH series require ARM25 and DSP 07 or higher versions.
*5. For compatibility, ET/BT series require ARM28 and DSP 12 or higher versions.
*5. For compatibility, EH/BH series require ARM29 and DSP 08 or higher versions.
ET (15-30kW)/ET G2/ET(40~50kW):
*3. For compatibility, ET (15~30kW) series requires ARM07 and DSP 06 or higher versions.
*4. For compatibility, ET (15~30kW) series requires ARM07 or higher.
*4. ET 50kW with Lynx C Series LX C101-10, LX C120-10 cannot reach the inverter's maximum power.
*5. For compatibility, ET (15~30kW) series requires ARM09 and DSP 08 or higher versions.
*3. Lynx Home F G2 series LX F9.6-H-20 requires ARM09 and DSP08 or higher for cooperation with ET (15~30kW) series.
*7. Lynx Home F G2 series LX F6.4-H-20 only supports GW12KL-ET and GW18KL-ET models of ET (15~30kW) series.
*6. For compatibility, ET (40~50K) series requires ARM10 or higher versions.
*6. For compatibility, ET (15~30K) series requires ARM13 or higher versions.
Battery Brand | Battery Series | Model | Inverter Series | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ET (5-10kW)* | EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ET (40~50kW) | ||||
BYD | Seria Battery-Box HV*1 | HVM 8.3 | ● | ● | |||||||
HVM 11.0 | ● | ● | |||||||||
Battery-Box Premium HVM*2 | HVM 13.8 | ● | ● | ||||||||
HVM 16.6 | ● | ● | |||||||||
HVM 19.3 | ● | ● | |||||||||
HVM 22.1 | ● | ● | |||||||||
Battery-Box Premium HVS*2 | HVS 5.1 | ● | ● | ||||||||
HVS 7.7 | ● | ● | |||||||||
HVS 10.2 | ● | ● | |||||||||
HVS 12.8 | ● | ● | |||||||||
BATTERYMAX LITE*3 | LITE 30 | ● | ● | ||||||||
LITE 37.5 | ● | ● | |||||||||
LITE 45 | ● | ● | |||||||||
LITE 52.5 | ● | ● | |||||||||
LITE 60 | ● | ● | |||||||||
LITE 67.5 | ● | ● |
* Obejmuje serie ET: ET PLUS+, ET PLUS+ (16A)
** W tym seria EH: EH PLUS
ET/EH/BT/BH/EHB:
*1. Compatibility requires ARM firmware version 07 or higher.
*2. Compatibility requires ARM firmware version 11 or higher.
ET15~30kW:
*2. Compatibility requires ARM firmware version 02 or higher.
BYD HVM 11.0 is used with ET15~30kW inverters, the inverter version must be ARM 09/DSP08 or higher.
ET 40~50kW:
*3. Compatibility requires ARM firmware version 08 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||
---|---|---|---|---|---|---|---|---|---|
EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ||||
LG | Seria RESU FLEX*1 | FLEX 8.6 | ● | ● | |||||
FLEX 12.9 | ● | ● | |||||||
FLEX 17.2 | ● | ● | |||||||
Seria RESU Type-R | RESU10H_Type-R | ● | ● | ||||||
Seria RESU Prime*2 | RESU10H Prime | ● | ● | ||||||
RESU16H Prime | ● | ● |
**. W tym seria EH: EH PLUS
EH/BH/EHB:
*1. Compatible only with ET PLUS+ series. Compatibility requires ARM firmware version 23 or higher.
*2. Compatibility requires ARM firmware version 20 or higher and DSP version 02 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||
---|---|---|---|---|---|---|---|---|---|
EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ||||
PYLON | Seria Powercube H1*1 | POWERCUBE-H1-48 | ● | ● | ● | ● | ● | ● | |
Seria Force H1*2 | Force-H1 | ● | ● | ● | ● | ● | ● | ||
Seria Force H2 | Force-H2 | ● | ● | ● | ● | ● | ● | ||
Seria Force H3*3 | Force-H3 | ● | ● | ● | ● | ● | ● |
**. W tym seria EH: EH PLUS
EH/BH/BT:
*1. Compatibility requires ARM firmware version 07 or higher. Please note that the nominal voltage of the POWERCUBE-H1-48 series must be within the battery voltage range for GoodWe inverters. Maximum 8 units for EH/BH series.
*2. Compatibility requires ARM firmware version 14 or higher.
*3. Compatibility requires ARM firmware version 14 or higher. Please note that the nominal voltage of the Force H3 series must be within the battery voltage range of GoodWe inverters. Maximum 4 units for EH/BH.
ET G2:
*3. Please note that the nominal voltage of the Force H3 series must be within the battery voltage range of GoodWe inverters. Maximum 6 units for ET G2.
Battery Brand | Battery Series | Model | Inverter Series | ||||||
---|---|---|---|---|---|---|---|---|---|
EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ||||
DYNESS | Seria Tower*1 | Tower T7 | ● | ● | ● | ● | ● | ● | |
Tower T10 | ● | ● | ● | ● | ● | ● | |||
Tower T14 | ● | ● | ● | ● | ● | ● | |||
Tower T17 | ● | ● | ● | ● | ● | ● | |||
Tower T21 | ● | ● | ● | ● | ● | ● | |||
Seria Tower Pro*2 | Tower Pro TP7 | ● | ● | ● | ● | ● | ● | ||
Tower Pro TP11 | ● | ● | ● | ● | ● | ● | |||
Tower Pro TP15 | ● | ● | ● | ● | ● | ● | |||
Tower Pro TP19 | ● | ● | ● | ● | ● | ● | |||
Tower Pro TP23 | ● | ● | ● | ● | ● | ● | |||
STACK100*3 | STACK100 | ● | ● | ● | ● | ● | ● |
**. W tym seria EH: EH PLUS
EH/BH/BT:
*1. Compatibility requires ARM firmware version 10 or higher.
*2. Compatibility requires ARM firmware version 10 or higher.
ET G2:
*1. Compatibility requires ARM firmware version 01 or higher.
*2. Compatibility requires ARM firmware version 01 or higher.
ET 15~30K:
*1. Compatibility requires ARM firmware version 08 or higher.
*2. Compatibility requires ARM firmware version 08 or higher.
*3. Compatibility requires ARM firmware version 08 or higher. ET15~30K only supports 5 to 13 STACK100 battery modules. The inverter may be damaged if the number of batteries is not compliant.
Battery Brand | Battery Series | Model | Inverter Series | ||||||
---|---|---|---|---|---|---|---|---|---|
EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ||||
Soluna | Seria akumulatora HV*1 | Soluna 7K Pack HV | ● | ● | ● | ● | ● | ● | |
Soluna 10K Pack HV | ● | ● | ● | ● | ● | ● | |||
Soluna 15K Pack HV | ● | ● | ● | ● | ● | ● |
**. W tym seria EH: EH PLUS
EH/BH/EHB/BT:
*1. Compatibility requires ARM firmware version 10 or higher.
Battery Brand | Battery Series | Model | Inverter Series | ||||||
---|---|---|---|---|---|---|---|---|---|
EH** | BT | BH | EHB | ET (15-30kW) | ET G2 | ||||
iPotisEdge | Mint-JKE*1 | Mint-JKE5 | ● | ● | ● | ● | ● | ● | |
Mint-JKE10 | ● | ● | ● | ● | ● | ● | |||
Mint-JKE15 | ● | ● | ● | ● | ● | ● | |||
Mint-JKE20 | ● | ● | ● | ● | ● | ● |
**. W tym seria EH: EH PLUS
EH/BH/EHB/BT:
*1. Compatibility requires ARM firmware version 12 or higher.
3) Commercial and industrial energy storage systems
Battery Brand | Battery Series | Model | Inverter Series | |
---|---|---|---|---|
ETC | BTC | |||
GOODWE | Lynx C series*1 | LX C 101-10 | ● | ● |
LX C 120-10 | ● | ● | ||
LX C 138-10 | ● | ● | ||
LX C 156-10 | ● | ● |
ETC 50kW/BTC 50kW:
*1. Compatibility requires EMS firmware version 02 or higher.
ETC 100kW:
*1. Compatibility requires EMS firmware version 00 or higher.