Manuals+

GoodWe Battery Compatibility Overview

Introduction

This document lists batteries compatible with GoodWe storage inverters, which are available in 3 system types:

  • 1) Low Voltage Energy Storage Systems
  • 2) High Voltage Energy Storage Systems
  • 3) Commercial and Industrial Energy Storage Systems

Only batteries listed in this document are approved for connection to GoodWe storage inverters according to the GoodWe Limited Warranty. In addition to the batteries listed in this document, some batteries complying with the GOODWE CAN communication protocol are not listed. For compatibility information on these batteries, please consult GOODWE technical service personnel.

1) Low Voltage Energy Storage Systems

GOODWE

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq (8 ~ 12K)ES Uniq (3 ~ 6K)EOETLV
GOODWESECU-ASECU-A5.4L●●●●●
Lynx Home ULX U5.4-L*1●●●●●●
LX U5.4-20*2●●●●●●
LX U5.0-30*4●●●●●●●
Lynx Home ALX A5.0-10*3●●●●
LX A5.0-30*5●●●●●●
BATGW14.3-BAT-LV-G10●

ES/EM/SBP/BP: *1. Versions 11 and above of ARM firmware required for compatibility. *2. Versions 11 and above of ARM firmware required for compatibility. *4. ARM firmware versions 22 and above required for compatibility. *4. Lynx Home U-30 batteries are compatible with ES/EM/SBP/BP series inverters. BMS version must be ≥01, i.e., batteries manufactured after April 2025.

ES G2/SBP G2: *2. Versions 02 and above of ARM firmware required for compatibility. *3. Versions 07 and above of ARM firmware required for compatibility. *4. Versions 09 and above of ARM firmware required for compatibility. *5. Versions 09 and above of ARM firmware required for compatibility.

ES Uniq 8~12kW: *4. Versions 10 and above of ARM firmware required for compatibility. *5. Versions 09 and above of ARM firmware required for compatibility.

EO 3.5~6K: *1. ARM firmware versions 03 and above required for compatibility.

BYD

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq (8 ~ 12K)ES Uniq (3 ~ 6K)EOETLV
BYDSérie Battery-Box Pro*1-●●●●●
Série Battery-Box Res*1-●●●●●
Série Battery-Box LV*2-●●●●●
Battery-Box Premium LVL*2LVL 15.4●●●●●
Série Battery-Box Premium LVS*2-●●●●●
BatteryBox LV5.0*3LV5.0●●
BatteryBox LV5.0+*4LV5.0+●●

ES/EM/SBP/BP: *1. Versions 00 and above of ARM firmware required for compatibility. *2. Versions 07 and above of ARM firmware required for compatibility.

ES G2/SBP G2: *3. Versions 09 and above of ARM firmware required for compatibility. *4. Versions 09 and above of ARM firmware required for compatibility.

ES Uniq 8~12kW: *3. Versions 10 and above of ARM firmware required for compatibility. *4. Versions 10 and above of ARM firmware required for compatibility.

LG

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq (8 ~ 12K)ES Uniq (3 ~ 6K)EOETLV
LGSérie RESU LVRESU 3.3*1●●●●
RESU 6.5*1●●●●●
RESU 10*1●●●●●
RESU 12*2●●●●●
RESU 13*2●●●●●
RESU 6.4 EX*1●●●●●

ES/EM/SBP: *1. Versions 00 and above of ARM firmware required for compatibility. *2. Versions 07 and above of ARM firmware required for compatibility.

PYLON

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq (8 ~ 12K)ES Uniq (3 ~ 6K)EOETLV
PYLONSérie US2000*1US2000●●●●●
Série US3000*2US3000●●●●●
Série US2000C*1US2000C●●●●
Série US3000C*2US3000C●●●●●
Série Force L1*2Force-L1●●●●●
Série Force L2*2Force-L2●●●●●
Série US5000*3US5000●●

ES/EM/SBP/BP: *1. Versions 00 and above of ARM firmware required for compatibility. *2. Versions 07 and above of ARM firmware required for compatibility. *3. Versions 00 and above of ARM firmware required for compatibility.

DYNESS

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
DYNESSSérie DYNESS-LV*1DYNESS-LV x1●
DYNESS-LV x2●
DYNESS-LV x3●
DYNESS-LV x4●
Série POWERBOX F*1POWERBOX F-2.5●●●●●
POWERBOX F-5.0●●●●●
POWERBOX F-7.5●●●●●
POWERBOX F-10.0●●●●●
Série DYNESS-LVDL5.0C*2●●●●●
DL5.0X*3●●●●●
POWER BOX G2*5POWER BOX G2●●●●●●
POWER BRICK*6POWER BRICK●●●●●●
A48100*4A48100●●●●●

ES/EM/SBP/BP: *1. Versions 07 and above of ARM firmware required for compatibility.

ES G2/SBP G2: *2. Versions 06 and above of ARM firmware required for compatibility. *3. Versions 07 and above of ARM firmware required for compatibility. *4. Versions 07 and above of ARM firmware required for compatibility. *5. Versions 08 and above of ARM firmware required for compatibility. *6. Versions 08 and above of ARM firmware required for compatibility.

ES Uniq: *5. Versions 09 and above of ARM firmware required for compatibility. *6. Versions 09 and above of ARM firmware required for compatibility.

OLOID

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
OLOIDSérie LBS051100A*1LBS051100A-A02●
LBS051100A-A03●
Série LBS051200A*1LBS051200A-A02●
LBS051200A-A03●

ES: *1. Versions 12 and above of ARM firmware required for compatibility.

Soluna

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
SolunaSérie LV (48V) BatterySoluna 4K Pack●
Soluna 5K Pack●
Soluna EOS 5K Pack●

ALPHA

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
ALPHA*1Série Smile5-BATSMILE5-BAT*2●
Série Smile-BATSmile-BAT-10.1P*2●
Smile-BAT-10.3P*2●
Smile-BAT-13.3P*3●
Série M48112-PM48112-P*3●
M48100-P*3●

ES/EM/SBP/BP: *1. ALPHA-ESS CAN communication line sequence does not match GoodWe inverters. A corresponding solution provided by ALPHA-ESS is required. *2. Versions 10 and above of ARM firmware required for compatibility. *3. Versions 11 and above of ARM firmware required for compatibility.

Tecloman

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
TeclomanSérie Firefly*1Firefly-3.6K●●●
Firefly-7.2K●●●
Firefly-10.8K●●●
Firefly-14.4K●●●
Firefly-18.0K●●●
Firefly-21.6K●●●
Firefly-25.2K●●●

ES/EM/SBP: *1. Versions 12 and above of ARM firmware required for compatibility.

UZENERGY

Battery BrandBattery SeriesBattery ModelInverter Series
ESEMSBPES G2SBP G2ES Uniq
UZENERGYSérie L051100-AL051100-A*1●●●

ES/EM/SBP: *1. Versions 12 and above of ARM firmware required for compatibility.

2) High Voltage Energy Storage Systems

GOODWE

Battery BrandBattery SeriesBattery ModelInverter Series
ET (5-10kW)*EH**BTBHEHBET (15-30kW)ET G2ET (40~50kW)
GOODWELynx Home F*1LX F6.6-H●●●●●●●
LX F9.8-H●●●●●●●
LX F13.1-H●●●●●●●
LX F16.4-H●●●●●●
Lynx Home F PLUS+*2LX F6.4-H-20*7●●●
Lynx Home F G2*3LX F9.6-H-20●●●●●●●
LX F12.8-H-20●●●●●●●
LX F16.0-H-20●●●●●●●
LX F19.2-H-20●●●●●●●
LX F22.4-H-20●●●●●●
LX F25.6-H-20●●●●●●
LX F28.8-H-20●●●
Lynx C*4GW60KWH-D-10●
GW100KWH-D-10●
GW100KWH-D-10 (Extension)●
LX C101-10●
LX C120-10●
LX C138-10●
LX C156-10●
Lynx Home D*5LXD5.0-10●●●●●●
BAT*6GW51.2-BAT-I-G10●●●●●●
GW56.3-BAT-I-G10●●●●●●
GW61.4-BAT-AC-G10●●●●●●
GW92.1-BAT-AC-G10●●
GW102.4-BAT-AC-G10●●
GW112.6-BAT-AC-G10●●

*. Includes ET series: ET PLUS+, ET PLUS+ (16A) **. Includes EH series: EH PLUS

ET/EH/BT/BH/EHB: *1. Versions 19 and above of ARM firmware required for compatibility. *2. Versions 23 and above of ARM firmware required for compatibility. *3. For compatibility, ET/BT series requires ARM25 and DSP09 and above versions; EHB series requires ARM25 and DSP 03 and above versions; EH/BH series requires ARM25 and DSP 07 and above versions. *5. For compatibility, ET/BT series requires ARM28 and DSP version 12 or higher. *5. For compatibility, EH/BH series requires ARM29 and DSP version 08 or higher.

ET (15-30kW)/ET G2/ET(40~50kW): *3. For compatibility, ET (15~30kW) series requires ARM07 and DSP version 06 and above. *4. For compatibility, ET (15~30kW) series requires ARM07 and above. *4. ET 50kW with Lynx C-LX C101-10, LX C120-10 series cannot reach the inverter's maximum power. *5. For compatibility, ET(15~30kW) series requires ARM09 and DSP version 08 or higher. *3. Lynx Home F G2 LX F9.6-H-20 series requires ARM09 and DSP08 or higher versions to be compatible with ET (15~30kW) series. *7. Lynx Home F G2 LX F6.4-H-20 series only supports GW12KL-ET and GW18KL-ET models of ET (15~30kW) series. *6. To ensure compatibility, ET (40~50K) series requires ARM10 or later version. *6. To ensure compatibility, ET (15~30K) series requires ARM13 or later version.

BYD

Battery BrandBattery SeriesBattery ModelInverter Series
ET (5-10kW)*EH**BTBHEHBET (15-30kW)ET G2ET (40~50kW)
BYDSérie Battery-Box HV*1-●●●●
Battery-Box Premium HVM*2HVM 8.3●●
HVM 11.0●●●●●●
HVM 13.8●●●●●●
HVM 16.6●●●●●●
HVM 19.3●●●●●●
HVM 22.1●●●●●●
Battery-Box Premium HVS*2HVS 5.1●●●●●●●
HVS 7.7●●●●●●●
HVS 10.2●●●●●●●
HVS 12.8●●●●●●
BATTERYMAX LITE*3LITE 30●
LITE 37.5●
LITE 45●
LITE 52.5●
LITE 60●
LITE 67.5●

*. Includes ET series: ET PLUS+, ET PLUS+ (16A) **. Includes EH series: EH PLUS

ET/EH/BT/BH/EHB: *1. Versions 07 and above of ARM firmware required for compatibility. *2. Versions 11 and above of ARM firmware required for compatibility.

ET15~30kW: *2. Versions 02 and above of ARM firmware required for compatibility. BYD PIN1/2 CAN communication line corresponds to inverter CAN communication line PIN4/5. *2. The maximum charge/discharge current of a single-stack HVS battery is 25A. With a single-stack HVS battery, the ET30kW cannot reach the inverter's rated maximum charge/discharge power. The ET15~30 series with HVM battery has a maximum charge and discharge current of 40A. *2. BYD HVM 11.0 is used with ET15~30kW inverters, the inverter version must be ARM 09/DSP08 or higher.

ET 40~50kW: *3. Versions 08 and above of ARM firmware required for compatibility.

LG

Battery BrandBattery SeriesBattery ModelInverter Series
ET (5-10kW)*EH**BTBHEHBET (15-30kW)ET G2ET (40~50kW)
LGSérie RESU FLEX*1FLEX 8.6●●
FLEX 12.9●●
FLEX 17.2●●
Série RESU Type-RRESU10H_Type-R●
Série RESU Prime*2RESU10H Prime●
RESU16H Prime●

**. Includes EH series: EH PLUS

EH/BH/EHB: *1. Only compatible with ET PLUS+ series. Versions 23 and above of ARM firmware required for compatibility. *2. Versions 20 and above of ARM firmware and DSP versions 02 and above required for compatibility.

PYLON

Battery BrandBattery SeriesBattery ModelInverter Series
ET (5-10kW)*EH**BTBHEHBET (15-30kW)ET G2ET (40~50kW)
PYLONSérie Powercube H1*1POWERCUBE-H1-48●●
Série Force H1*2Force-H1●●
Série Force H2Force-H2●●
Série Force H3*3Force-H3●●

**. Includes EH series: EH PLUS

EH/BH/BT: *1. Versions 07 and above of ARM firmware required for compatibility. Please note that the nominal voltage of the POWERCUBE-H1-48 series must be within the GoodWe inverter battery voltage range. Maximum 8 units for EH/BH. *2. Versions 14 and above of ARM firmware required for compatibility. *3. Versions 14 and above of ARM firmware required for compatibility. Please note that the nominal voltage of the Force H3 series must be within the GoodWe inverter battery voltage range. Maximum 4 units for EH/BH.

ET G2: *3. Please note that the nominal voltage of the Force H3 series must be within the GoodWe inverter battery voltage range. Maximum 6 units for ET G2.

DYNESS

Battery BrandBattery SeriesBattery ModelInverter Series
ET (5-10kW)*EH**BTBHEHBET (15-30kW)ET G2ET (40~50kW)
DYNESSSérie Tower*1Tower T7●●
Tower T10●●
Tower T14●●
Tower T17●●
Tower T21●●
Série Tower Pro*2Tower Pro TP7●●
Tower Pro TP11●●
Tower Pro TP15●●
Tower Pro TP19●●
Tower Pro TP23●●
STACK100*3STACK100●●●

**. Includes EH series: EH PLUS

EH/BH/BT: *1. Versions 10 and above of ARM firmware required for compatibility. *2. Versions 10 and above of ARM firmware required for compatibility.

ET G2: *1. Versions 01 and above of ARM firmware required for compatibility. *2. Versions 01 and above of ARM firmware required for compatibility.

ET 15~30K: *1. Versions 08 and above of ARM firmware required for compatibility. *2. Versions 08 and above of ARM firmware required for compatibility. *3. Versions 08 and above of ARM firmware required for compatibility. ET15~30K supports only 5 to 13 STACK100 battery modules. The inverter will be damaged if the number of batteries does not match.

Soluna

Battery BrandBattery SeriesBattery ModelInverter Series
EH**BTBHET G2ET (40~50kW)
SolunaSérie HV Battery*1Soluna 7K Pack HV●●
Soluna 10K Pack HV●●
Soluna 15K Pack HV●●

**. Includes EH series: EH PLUS

EH/BH/EHB/BT: *1. Versions 10 and above of ARM firmware required for compatibility.

iPotisEdge

Battery BrandBattery SeriesBattery ModelInverter Series
EH**BTBHET G2ET (40~50kW)
iPotisEdgeMint-JKE*1Mint-JKE5●●
Mint-JKE10●●
Mint-JKE15●●
Mint-JKE20●●

**. Includes EH series: EH PLUS

EH/BH/EHB/BT: *1. Versions 12 and above of ARM firmware required for compatibility.

3) Commercial and Industrial Energy Storage Systems

GOODWE

Battery BrandBattery SeriesBattery ModelInverter Series
ETCBTC
GOODWESérie Lynx C*1LX C 101-10●
LX C 120-10●
LX C 138-10●
LX C 156-10●

ETC 50kW/BTC 50kW: *1: Versions 02 and above of EMS firmware required for compatibility.

ETC 100kW: *1. Versions 00 and above of EMS firmware required for compatibility.

PDF preview unavailable. Download the PDF instead.

GW Battery Compatibility Overview-FR Adobe PDF Library 15.0 Adobe InDesign 16.0 (Macintosh)

Related Documents

PreviewGoodWe Battery Compatibility Overview and Inverter Matching Guide
This document provides a comprehensive overview of compatible batteries for GoodWe storage inverters, categorized into low-voltage, high-voltage, and commercial/industrial energy storage systems. It lists specific battery brands, series, and models, along with their compatibility with various GoodWe inverter series, including required firmware versions.
PreviewGoodWe Battery Compatibility Overview
GoodWe provides a detailed compatibility overview for its hybrid inverters with various battery models. This guide covers low-voltage, high-voltage, and commercial/industrial energy storage systems, listing compatible battery brands, series, and models alongside specific GoodWe inverter series, including essential firmware version requirements.
PreviewGoodWe Battery Compatibility Overview for Energy Storage Inverters
This document provides a comprehensive list of batteries compatible with GoodWe energy storage inverters, categorized into low-voltage, high-voltage, and commercial/industrial systems. It details compatible battery models from various brands and their compatibility with different GoodWe inverter series, including essential firmware requirements.
PreviewGoodWe Battery Compatibility Overview
This document provides a comprehensive overview of battery compatibility with GoodWe storage inverters, covering low-voltage, high-voltage, and commercial/industrial energy storage systems. It lists approved batteries and their compatibility with various GoodWe inverter series, including essential firmware version requirements.
PreviewGoodWe Battery Compatibility Overview
Comprehensive guide detailing GoodWe inverter compatibility with various low voltage, high voltage, and commercial/industrial battery storage systems from leading manufacturers, including firmware requirements.
PreviewGoodWe Battery Compatibility Overview
This document provides a comprehensive overview of battery compatibility with GoodWe storage inverters across various system types, including low-voltage, high-voltage, and commercial/industrial applications. It details compatible battery brands, series, and models, along with required firmware versions for optimal performance and warranty compliance.
PreviewGuía de Compatibilidad de Baterías GoodWe con Inversores
Información detallada sobre la compatibilidad de baterías de bajo, alto voltaje y sistemas comerciales/industriales con inversores GoodWe, incluyendo requisitos de firmware.
PreviewGoodWe Battery Compatibility Overview
A comprehensive guide detailing compatible batteries for GoodWe storage inverters across low-voltage, high-voltage (including US-specific), and commercial/industrial energy storage systems. This document lists approved battery models and their compatibility with various GoodWe inverter series, including essential firmware version requirements.