Cinmoore CMC2U User Manual

1. What's in the box?

The package includes the following items:

• Camera x1
• Mounting Base x1
• Mounting Screws x1
• Adapter x1
• Power cord x1
• User Manual x1

2. Installation

The camera can be placed on a flat surface such as a writing desk, dining table, or coffee table. It can also be mounted on a wall.

2.1 Wall Installation

Step 1

Use a pencil to mark the desired positions for the mounting holes on the wall. Drill two holes at the marked locations. The recommended hole diameter is 6mm, and the depth is approximately 30mm.

[Image: Pencil marking holes on a wall]

Step 2

Insert two expansion nuts into the drilled holes using a hammer.

[Image: Hammer inserting expansion nuts into wall holes]

Step 3

Align the mounting plate (with the arrow side facing up) with the holes on the wall. Insert the screws through the base of the mounting plate and into the expansion nuts. Tighten the screws using a Phillips screwdriver.

[Image: Screwdriver tightening screws on the mounting plate]

Step 4

Align the notch on the bottom of the camera with the raised part on the mounting base. Turn the camera clockwise until it locks securely into place.

[Image: Camera being attached to the mounting base with a rotational arrow indicating locking]

Note for wall installation: The mounting wall must be capable of supporting at least three times the total weight of the camera.

Warning: To prevent injury, ensure the unit is securely fastened to the ceiling or wall according to the installation instructions.

3. Adding Camera

Connect the power cable to the Type-C power connector on the back of the camera. The camera will power on automatically, and the indicator light will blink blue.

[Image: Camera connected to a power adapter and cable]

Tip: After powering on, do not force the camera head to rotate. If the lens positioning is inaccurate, you can calibrate it using the Divine Eye APP.

WARNING: Use only the provided power adapter that meets PS1 and L.P.S. specifications. Using other power adapters may lead to unknown risks.

Indicator Light Status

Connect to CINMOORE APP

Download the CINMOORE app from the App Store (for iOS devices) or Google Play (for Android devices).

[Download on the App Store]

[Get it on Google Play]

Tips: Due to app updates, the actual operation may differ slightly from the descriptions. Please follow the guidelines within the current CINMOORE APP for operation.

Company Statement

1. Cinmoore has made every effort to ensure the completeness and accuracy of the materials. Cinmoore reserves the right to provide clarification or interpretation for any questions or disputes.
2. Content will be updated promptly based on product functionality, and described products or programs may be modified regularly. Updates will be included in new versions without prior notification.
3. This material is for customer reference only. There is no guarantee that it is exactly the same as the product. Please refer to the actual product for accurate information.
4. The camera parts shown are for illustration purposes only and do not represent the purchased configuration.

Operating conditions:

Temperature: -10° to 45°C (14° to 113°F)

Humidity: 95% or less (non-condensing)

FCC Statements

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Information

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician to help.

To maintain compliance with the FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Use only the supplied antenna.