Cinmoore 2.5K 4G AOR Pan & Tilt Camera
Quick Operation Guide
What's in the box
The package includes:
- Camera X1
- Mounting Screws
- Quick Guide
- Ejector Pin
- Type C Power Cable
Camera Structure
The camera features the following components:
- Lens
- Warm Light
- Indicator light
- Infrared LED
- PIR (Passive Infrared Sensor)
- Built-in Mic
- Type-C Power Port
- SIM card Slot
- Power Key
SIM Card Slot: The camera comes pre-installed with a SIM card. Once turned on, it can be bound.
Power Key: Long press for 3 seconds to turn the device on and off. Short press twice in a row to reset the camera.
Please Charge Before First Power On
When the battery is low, the Cinmoore app will notify you to charge it as soon as possible via the Type-C Power Port.
Set Up With Cinmoore App
Download the Cinmoore App from the App Store or Google Play. Follow the in-app instructions to complete the setup process.
[QR Code for App Download]
Connect Camera
- Reset Camera: Press the Power button for 3-5 seconds to turn on the device. A voice prompt will indicate the device has been turned on. Please use the APP to bind the device.
- Add Camera: Click the '+' icon in the upper right corner of the app and scan the QR code on the camera.
- Configure the network: Enter your home's Wi-Fi account and password in the APP (currently only supports 2.4G Wi-Fi). Follow the on-screen instructions to complete the setup.
Installation Methods
The camera supports various installation methods:
- Method A: Shows a 0-355° horizontal rotation and 0-90° vertical tilt range.
- Method B: Illustrates mounting the camera.
- Method C: Illustrates mounting the camera. *The hoop bracket needs to be purchased separately.
How to purchase 4G data on the app
After successful binding, navigate to the camera settings menu and proceed to the 4G data purchase page to make your purchase.
[Screenshot of Cinmoore App showing '4G Data Packages' option]
Indicator Light Status
| Camera Status | Indicator Light Status |
|---|---|
| During charging, automatically after fully charged | The red light stays on all the time. |
| The device is working normally | The blue light stays on for 10 seconds before automatically turning off. |
| Distribution network binding | Blue light flash. |
| The device is low on battery and cannot be turned on | The blue light flashes three times within one second. |
| Firmware version upgrade in progress | Blue light flashing slowly. |
Company Statement
- Cinmoore has made every effort to ensure the completeness and accuracy of the materials. For any questions or disputes, please refer to the company's final explanation.
- Information content will be updated in a timely manner according to product functions. Products or programs described may be modified, and updates will be added to new versions without notification.
- The content of this material is for customer reference only. There is no guarantee that it is exactly the same as the product. Please focus on the actual product.
- Camera parts shown in this information are for illustration purposes only and do not represent the purchased configuration.
Operating conditions:
Temperature: -10° to 45°C (14° to 113°F)
Humidity: 95% or less (non-condensing)
FCC statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.
FCC Conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
