iHome TIMEBASE iBTW20

Features & Functions

The iHome TIMEBASE iBTW20 offers several features for convenient use:

• TIME SET: Press and hold the Time Button to set the clock. Adjust time using +/- buttons and confirm with the Time Button. Repeat for year, month, and date.
• ALARM SET: Press the Alarm Button to preview the alarm. Press again to arm/disarm. Press and hold to set the alarm time (adjust with +/- and confirm).
• PLUS Button: Increases volume or adjusts settings.
• MINUS Button: Decreases volume or adjusts settings.
• POWER/ALARM RESET Button: Turns the unit ON/OFF. Resets a sounding alarm.
• PLAY/PAUSE Button: Plays/pauses audio, answers/ends calls, or activates Google/Siri with a long press.
• Snooze (ZZZ) Button: Press to snooze a sounding alarm. Press and hold to adjust snooze duration (1-29 minutes). Press to adjust display brightness.
• DST Switch: Allows manual adjustment for Daylight Saving Time (-1 hour, +1 hour) or automatic updates (Auto).
• Bluetooth Pairing Button/LED: Used for pairing Bluetooth devices.
• Display Icons:
  • Alarm Indicator: Shows when an alarm is armed.
  • Low Backup Battery Indicator: Alerts when the backup battery needs replacement.
  • PM Indicator: Displays 'PM' for afternoon/evening times.

Getting Started

Follow these steps to set up your TIMEBASE unit:

Step One: Connecting the Unit

Before initial use, remove the battery pull tab from the bottom of the unit. Connect the included AC adapter to the DC jack on the back of the unit and plug the other end into a working wall outlet.

Step Two: Connecting to Bluetooth

• Turn on your Bluetooth device and set it to 'discoverable' mode.
• On the TIMEBASE unit, press and hold the Bluetooth Pairing Button to enter pairing mode.
• On your device, select 'iHome iBTW20' from the Bluetooth menu to connect.

Step Three: Setting the Time

• Press and hold the Time Button until the clock display begins to flash.
• Use the +/- Buttons to adjust the time. Press the Time Button to confirm.
• The year will flash. Use +/- to adjust and press Time Button to confirm.
• The month will flash. Use +/- to adjust and press Time Button to confirm.
• The date will flash. Use +/- to adjust and press Time Button to confirm all settings.

Ensure the correct AM/PM time is set. The PM indicator will appear on the left side of the display.

Setting the Alarm

Settings will time out if not completed within a short period.

1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash.
2. Use the +/- Buttons to adjust the alarm time. Hold for rapid setting. Ensure correct AM/PM.
3. Press the Alarm Button to confirm the alarm time. The alarm schedule will flash (7 for every day, 5 for weekdays, 2 for weekends). Use +/- to select.
4. Press the Alarm Button to confirm the schedule. Use +/- to select the wake source: Tones, Bluetooth audio, or Beep.
5. Press the Alarm Button to confirm the wake source. Use +/- to control alarm volume and press the Alarm Button again to confirm all settings. Two beeps indicate successful alarm setup. The alarm icon will remain on the display.
6. To turn off a sounding alarm and reset it for the next day, press the Alarm Button.

Previewing the Alarm

Press and release the Alarm Button to preview the alarm settings or to toggle the alarm ON (indicated by the alarm icon) or OFF (no alarm icon).

Programmable Snooze

1. During normal operation (when no alarm is sounding), press and hold the ZZZ Button.
2. Use the +/- Buttons to select a snooze time between 1-29 minutes.
3. Press the ZZZ Button to confirm the snooze setting.
4. When an alarm is sounding, press the ZZZ Button to temporarily silence it (default is 9 minutes).

Wireless Charging

The TIMEBASE supports Qi compatible phones, including those with plastic cases up to 3mm thick.

• Place your Qi compatible device face up on the charging rest.
• Wireless Charging Status LED:
  • Slow blinking LED: Device is charging properly.
  • Solid LED: Device is charged.
  • Rapid blinking LED: Device is not charging properly; reposition it. (Note: LED may continue to blink slowly for fully charged iOS devices.)

CAUTION: Remove any metal protective or magnetic case from your phone before charging. Do not place magnetic-striped or other metal objects on the charger, as this could damage the object or the unit. Phones with metallic-looking finishes will charge normally.

*Some larger phone cases may prevent charging. Remove the case for proper charging.

USB Charging

Connect the standard size end of a USB cable (not included) to the USB charging port on the back of the unit and the other end to your device's charging port. The unit must be plugged into a working outlet to charge devices.

Battery Back-up

The unit includes a CR-2450 back-up battery to maintain alarm and clock settings during temporary power failures. Remove the battery pull tab before use.

When the battery icon on the clock display flashes, it indicates the backup battery needs replacement. The battery compartment is located on the bottom of the unit.

1. Ensure the AC adapter is connected to prevent losing settings during replacement.
2. Use a Phillips screwdriver to open the battery compartment door.
3. Remove the old battery and insert a new CR-2450 battery, ensuring the '+' side faces you. Replace the compartment door. Do not overtighten screws.

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries with metal objects, mix battery types, or store with hazardous materials. Store in a cool, dry, ventilated area and follow disposal regulations.

Chemical Burn Hazard: Do not ingest the battery. This product contains a coin/button cell battery. If swallowed, it can cause severe internal burns in 2 hours and can lead to death. Keep batteries away from children. If the compartment does not close securely, stop using the product and keep it away from children. Seek immediate medical attention if batteries are suspected to have been swallowed or placed inside the body.

Pay attention to the environmental aspects of battery disposal.

Important Safety Instructions

This unit is designed for personal safety, but improper use can lead to electrical shock or fire hazards. Read and follow all safety and operating instructions carefully.

1. Water and Moisture: Do not use near water (e.g., bathtub, sink, pool, wet basement).
2. Ventilation: Do not block ventilation openings (e.g., on beds, sofas, cabinets).
3. Heat: Keep away from heat sources (radiators, stoves, amplifiers).
4. Power Sources: Connect only to the described power supply type and use the included AC adapter.
5. Power-Cable Protection: Route cables to prevent them from being walked on or pinched.
6. Cleaning: Clean only with a dry cloth.
7. Objects and Liquid Entry: Prevent objects from falling into or liquids from spilling into openings or vents.
8. Attachments: Use only manufacturer-recommended attachments.
9. Lightning and Power Surge Protection: Unplug during lightning storms or when unused for extended periods.
10. Overloading: Do not overload wall sockets or extension cords.
11. Damage Requiring Service: Refer to qualified personnel if the power cable, enclosure, or unit is damaged, exposed to rain, dropped, or exhibits abnormal performance.
12. Periods of Nonuse: Remove batteries before storing for extended periods (e.g., a month or longer).
13. Servicing: Do not attempt to service beyond methods described in the manual; refer to qualified personnel.
14. Magnetic Interference: The unit's speakers contain powerful magnets that can interfere with or damage sensitive equipment (hard drives, CRT TVs, medical devices). Keep the unit away from such products.
15. Attachments/Accessories: Only use manufacturer-specified items. Suitable for tropical/moderate climates.
16. Naked Flames: Do not place naked flame sources (e.g., lighted candles) on the apparatus.
17. WARNING: To reduce fire/electric shock risk, do not expose to rain or moisture.
18. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
19. Do not dispose of batteries in household trash or fire.
20. The mains plug of the power adapter is the disconnect device and should remain readily operable.

Limited One Year Warranty

iHome Products, a division of SDI Technologies Inc. ("SDI"), warrants this product against defects in workmanship and materials under normal use for one (1) year from the original purchase date.

If the product fails to function satisfactorily, return it to the original place of purchase. If service is still required due to defect or malfunction during the warranty period, SDI will repair or replace the product at its discretion, subject to verification of the defect.

For service, visit ihome.com/support. A sales receipt is required for warranty validation.

Disclaimer of Warranty: This warranty is valid only if the product is used for its intended purpose. It does not cover damage from negligence, misuse, accident, unauthorized repairs, cracked cabinets, excessive heat, or damage to digital media/CDs/cassettes. It also does not cover shipping costs to/from the Factory Service Center.

This warranty is valid only in the United States and applies to the original purchaser. SDI and its affiliates are not liable for consequential or incidental damages, lost profits, or punitive damages. Some states may have different regulations regarding implied warranties or consequential damages.

This warranty grants specific legal rights, which may vary by state.

© 2019 SDI Technologies, Inc. All rights reserved.