FocusPRO® S200 Smart Thermostat

Thermostat Controls

The thermostat features a display and several control buttons for managing your home's climate.

Display Information:

• Shows current indoor temperature (e.g., 72°F / 22.5°C).
• Displays the setpoint temperature (e.g., 68°F / 20.0°C).
• Indicates System Status (e.g., Heat On, Cool On, Aux Heat On, Auto).
• Shows Schedule information if a time-based schedule is active.
• Displays WiFi status.
• May show "Waiting for Equipment" during compressor protection delay.

Control Buttons:

• MODE: Cycles through system modes: Heat, Cool, Off, Auto, EM Heat (Emergency Heat).
• MENU: Accesses settings like Schedule, WiFi, alerts, and reminders.
• FAN: Cycles through fan modes: Auto (runs with heating/cooling), On (runs continuously), Circulate (runs ~33% of the time).
• Navigation Buttons (Up/Down Arrows): Increase or decrease temperature setpoint and navigate menus.
• HOLD: Maintains the current temperature setting.

The thermostat is compatible with 2.4 or 5 GHz WiFi networks.

Resources:

For the full User Manual, search online for "Resideo 33-00694EFS" or scan the provided QR code. A QR code is also available to download the First Alert app.

System Operation Settings

System Modes:

1. Press the MODE button to cycle through available system modes (e.g., Heat, Cool, Off, Auto).
2. Continue pressing until the desired system mode is displayed, then release to activate.

Fan Modes:

1. Press or release the FAN button to cycle through fan modes: Auto, On, Circulate.
2. Stop pressing when the desired fan mode is displayed.

• Auto: The fan operates only when the heating or cooling system is running.
• On: The fan runs continuously.
• Circulate: The fan runs approximately 33% of the time to circulate air.

Set the Time and Date

Setting the Time:

1. Press MENU on the thermostat.
2. Navigate to TIME and press Select.
3. Choose between 12 or 24-hour clock format and press Next.
4. Adjust the hour using the navigation buttons and press Next.
5. Adjust the minute using the navigation buttons and press Save & Exit.

Setting the Date:

1. Press MENU on the thermostat.
2. Navigate to DATE and press Select.
3. Choose the YEAR using the navigation buttons and press Next.
4. Adjust the MONTH using the navigation buttons and press Next.
5. Choose the DATE using the navigation buttons and press Save & Exit.

Note: If the time and date are set via the internet, only the 12 or 24-hour clock format may be available for editing.

To Adjust Program Schedules

This feature allows you to set different temperature and fan settings for various times of the day and days of the week.

1. Press MENU, then navigate to SCHED and press Select.
2. A square will appear around ON or OFF. To use a schedule, select ON and press NEXT to edit, or press EXIT to leave the menu.
3. If editing, press NEXT to select the day(s) you wish to edit.
4. The word "Wake" should be flashing. Press NEXT. Use navigation buttons to turn this schedule period ON or OFF, then press NEXT.
5. If the period is set to ON, the time will flash. Adjust the time for this period using navigation buttons and press NEXT.
6. The Heat setpoint will flash. Adjust the Heat setpoint for this period using navigation buttons and press NEXT.
7. The Cool setpoint will flash. Adjust the Cool setpoint for this period using navigation buttons and press NEXT.
8. The display will show the next schedule period flashing. Repeat steps 4-7 for other schedule periods and days.
9. Press the SAVE & EXIT button at the upper left to save your changes.

Troubleshooting

If you encounter issues with your thermostat, try these common solutions:

• Display is blank:
  • Check the circuit breaker and reset if necessary.
  • Ensure the power switch for your heating and cooling system is ON.
  • Verify that the furnace door is securely closed.
• "Waiting for equipment" appears on the screen:
  • This indicates the compressor protection feature is engaged. Wait approximately 5 minutes for the system to restart safely.
• Temperature settings do not change:
  • If the display shows "unlock", the thermostat owner may have set a lockout setting.
  • Verify you are in the correct mode (Heat, Cool, EM Heat, or Auto).
  • If in the correct mode but unable to set heat between 32°F and 90°F (0°C to 32°C) or cool between 50°F and 99°F (10°C to 37°C), range-stops may be restricting your settings. Contact your installer to check if range-stops were configured.

Caution

Equipment damage hazard. To prevent possible compressor damage, do not operate the cooling system when the outdoor temperature is below 50°F (10°C).