FITUEYES FT88 Floor TV Stand Installation Manual

What's in the Box

Verify all parts are present before assembly.

Main Components:

• Base (Part 1)
• Support Column (Part 2)
• TV Mounting Bracket (Part 3)
• TV Back Plate (Part 4)
• Support Arms (Part 5)
• Accessory Pack (Part 6)

Hardware Included:

• A/B (x6)
• C (x13)
• D (x1)
• E (x1)
• F (x1)
• G (x1)
• M-A x4 (M8x20)
• M-B x4 (M4x14)
• M-C x4 (M4x30)
• M-D x4 (M8x30)
• M-E x4 (M6x14)
• M-F x4 (M6x30)
• M-G x4 (M8x50)
• M-H x4
• M-I x8
• M-J x8

Accessories for Installing TV:

• M-A (M8x20) x4
• M-B (M4x14) x4
• M-C (M4x30) x4
• M-D (M8x30) x4
• M-E (M6x14) x4
• M-F (M6x30) x4
• M-G (M8x50) x4
• M-H (M8x50) x4
• M-I (M8x50) x8
• M-J (M8x50) x8

Assembly Instructions

Follow these steps carefully for a secure installation.

Step 1: Assemble the Base

Attach the support column (Part 2) to the base (Part 1) using the provided hardware (e.g., M-A screws).

Step 2: Attach TV Back Plate

Mount the TV back plate (Part 4) to the back of your TV. Choose the appropriate screws (M-A to M-G) based on your TV's VESA holes. Use installation method A1 if the TV back is flat, or A2 with washers (M-H to M-J) if the back is uneven. Washers can be stacked if needed.

Note on Screw Selection:

• A1 Installation (Flat TV Back): Use appropriate screws from M-A to M-G.
• A2 Installation (Uneven TV Back): Use appropriate screws from M-A to M-G along with washers (M-H to M-J). Stack washers as needed for a secure fit.

Step 3: Mount TV to Support Column

Attach the support arms (Part 5) to the TV back plate (Part 4). Then, connect the TV assembly to the support column (Part 2) using the provided hardware (e.g., M-I screws).

Step 4: Secure the TV

Ensure the TV is securely fastened to the stand. Use the safety straps or locking mechanisms if provided.

Step 5: Adjust Height (if applicable)

Some models allow for height adjustment. Follow specific instructions for adjusting the TV's position.

Step 6: Final Check

Double-check all connections and screws to ensure stability and safety.

Step 7: Part Disassembly (Example: Part 4)

Illustrates how to disassemble specific parts, such as Part 4, using hardware like 4A and 4B.

Step 8: Final Assembly Diagram

Shows the completed assembly with all parts connected.

Step 9: Cable Management

Organize cables using any integrated cable management features.

Step 10: Mounting Options

Details different mounting configurations, potentially including height and angle adjustments.

Step 11: Final Stand Configuration

Depicts the fully assembled TV stand with the TV mounted.

Important Information

Safety First: Always follow the instructions carefully. Ensure the stand is placed on a stable, level surface. Do not overload the stand beyond its specified weight capacity.

Multilingual Support: This manual provides instructions in multiple languages, including English, Chinese, Japanese, German, French, Italian, and Spanish. Please refer to the relevant section for your language.

Contact Support: For missing parts or assembly assistance, please refer to the FITUEYES customer support information.