ASUS MA-25 Coax to 2.5G Ethernet Adapter

Package Contents

• ASUS MA-25 Coax to Ethernet Adapter
• Ethernet Cable
• Coax Cable
• F-type Male to F-type Male 90° Angle Connector
• Screw and Anchor
• Quick Start Guide
• Warranty Card

A Quick Look at Your MA-25

MoCA 2.5 Extended Band D Switch:

• Mode 1 (4CH): 1,275~1,675MHz
• Mode 2 (5CH): 1,125~1,625MHz

12VDC DC-IN Port

COAX IN F-type Female connector

MPS Security button

RJ-45 port for 2.5Gbase-T Ethernet

LED Indications

MoCA LED: MoCA link status

• Solid white: MoCA is connected.
• Blinking white: MA-25 is transmitting or receiving data via MoCA connection.

ETH LED: Ethernet status

• Solid white: MA-25 is connected to Ethernet.
• Blinking white: MA-25 is transmitting or receiving data via Ethernet connection.

Security LED: MoCA Security is enabled/disabled.

• Solid white: MoCA security is enabled.
• Off: MoCA security is disabled.

Installing Your MA-25

MoCA Adapter 1: Connect the MoCA Adapter 1 to your router, Mesh router, or modem.

MoCA Adapter 2: Connect the MoCA Adapter 2 to your Mesh node or devices.

Connections can be made via a coax outlet or a splitter.

Using MoCA Protected Setup (MPS)

Note: If you want to add the MA-25 to an existing MoCA 2.5 Network with different security/privacy settings, MPS is required.

1. Trigger the MPS pairing mode on any device in the existing MoCA network.
2. Press the MPS button on the MA-25 to join the network.

Using Extended Band D Switch

If you are using DOCSIS 3.1 coexisting with the MoCA network, choose Mode 1 to avoid interference; if not, stay on Mode 2.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Recycling and Compliance

ASUS recycling and takeback programs are part of a commitment to environmental protection. Find detailed recycling information for different regions at http://csr.asus.com/english/Takeback.htm.

This product complies with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework. Chemical substance information is available at http://csr.asus.com/english/REACH.htm.

Networks Global Hotline Information

ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan

ASUS Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY

Manufacturer Compliance Information (Taiwan)

The product contains limited substances as per the following table:

Note 1: 'Ο' indicates that the percentage content of the restricted substance does not exceed the percentage content threshold.

Note 2: '-' indicates that the restricted substance is an exclusion item.