ASUS RT-AC67P Dual Band AC WiFi Router Quick Start Guide

Package Contents

• RT-AC67P Wireless Router
• AC adapter
• Network cable (RJ-45)
• Quick Start Guide

A Quick Look at RT-AC67P

An illustration of the RT-AC67P router, showing its front and back panels with labeled ports and indicators.

Front Panel Indicators:

1. LAN LED
2. WAN (Internet) LED
3. 2.4GHz LED
4. 5GHz LED
5. Power LED
6. WPS button

Back Panel Ports:

7. Power (DCIN) port
8. Power switch
9. USB 3.0 port
10. WAN (Internet) port
11. LAN 1 ~ 4 ports

NOTES:

• Use only the adapter that came with your package. Using other adapters may damage the device.

Specifications:

DC Power adapter: DC Output: +12V with 2A current
Operating Temperature: 0~40°C
Storage Temperature: 0~70°C
Operating Humidity: 50~90%
Storage Humidity: 20~90%

Position Your Wireless Router

For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:

• Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
• Keep the wireless router away from metal obstructions and away from direct sunlight.
• Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.

Preparing Your Modem

1. Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.

   An illustration showing a power plug being disconnected from an outlet, indicating 'Unplug'.

   NOTE: If you are using DSL for Internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure the router.

2. Connect your modem to the router with the bundled network cable.

   An illustration showing a network cable connecting a modem to the router's WAN port.

3. Power on your cable/DSL modem.
4. Check your cable/DSL modem LED lights to ensure the connection is active.

   An illustration of a modem with active LED lights, indicating a successful connection.

Setting Up Your RT-AC67P

You can set up your RT-AC67P via wired or wireless connection.

A. Wired Connection

1. Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router.

   An illustration showing a computer connected to a router's LAN port via an Ethernet cable, and the router connected to power.

2. The web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
3. Log into the Web GUI. By default, the login username and password for your wireless router's Web GUI is admin.
4. Set up a password for your router to prevent unauthorized access.

   A screenshot of the 'Login Information Setup' screen, prompting for a new password with fields for 'Router Login Name' (pre-filled as 'admin'), 'New Password', and 'Retype Password', along with a 'Show password' checkbox.

B. Wireless Connection

1. Plug your router into a power outlet and power it on.

   An illustration showing the router connected to power.

2. Connect to the network with SSID shown on the product label on the back side of the router. For better network security, change to a unique SSID and assign a password.

   A screenshot of a Wi-Fi network list on a computer, showing 'ASUS_XX' as connected. A text box indicates 'Wi-Fi Name (SSID): ASUS_XX', explaining that 'XX' refers to the last two digits of the MAC address found on the router's label.

Frequently Asked Questions (FAQ)

Regulatory Information

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs reflect our commitment to environmental protection. We provide solutions for responsible recycling of products, batteries, components, and packaging materials. For detailed recycling information in different regions, please visit http://csr.asus.com/english/Takeback.htm.

REACH

ASUS complies with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework. Chemical substances in our products are published at the ASUS REACH website: http://csr.asus.com/english/REACH.htm.

Federal Communications Commission Statement (FCC)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Important Note: Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow operation instructions as documented in this manual.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-3(B)/NMB-3(B).

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 23 cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure can also be found at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

For products available in the US/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted for indoor use only.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

Manufacturer Information

Manufacturer: ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan

Authorised representative in Europe: ASUS Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY

Authorised distributors in Turkey:

• BOGAZICI BILGISAYAR TICARET VE SANAYI A.S.
  Tel./FAX No.: +90 212 331 1000/+90 212 332 28 90
  Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN HAN B BLOK NO.121 SISLI, ISTANBUL 34394
• CIZGI Elektronik San. Tic. Ltd. Sti.
  Tel./FAX No.: +90 212 356 70 70 / +90 212 356 70 69
  Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/ISTANBUL
• KOYUNCU ELEKTRONİK BİLGİ İSLEM SIST. SAN. VE DIS TIC. A.S.
  Tel. No.: +90 2165288888
  Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZİ, SANCAKTEPE ISTANBUL
• ENDEKS BİLİŞİM SAN VE DIŞ TİC LTD ŞTİ
  Tel./FAX No.: +90 216 523 35 70 / +90 216 523 35 71
  Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI, G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE, ISTANBUL
• PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S
  Tel./FAX No.: +90 216 528 0000
  Address: ORGANIZE SANAYI BOLGESI NATO YOLU 4.CADDE NO:1 UMRANIYE, ISTANBUL 34775