Workstation Drop-in Kitchen Sink

with Single Faucet Hole in Center

Prior to Installation:

Inspect kitchen sink to ensure no damages have occurred while in shipping.
Observe all plumbing and building codes in accordance with your state and local requirements.
Additional floor and wall preparations may be necessary to avoid damage to the product.
Make sure to purchase the correct cabinet for your undermount sink.
Installation with laminate countertop not recommended.
All dimensions are nominal! Be sure to measure your cabinet to installation.

General Recommendations:

Please read installation and maintenance instructions thoroughly before installing the kitchen sink.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
If you have any questions or concerns, please contact Jodie J. Spencer at 585 488 8279 or jodie.j.spencer@outlook.com.

1. INSTALLATION OPTIONS

We recommend Undermount or Drop-in kitchen sink installation.
Ensure there is adequate room for the faucet and backsplash installations.

Note on installation types:

[Incorrect installation type] ❌ [Correct installation type] ✔️ [Correct installation type] ✔️

2. INSTRUCTIONS

Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you find any damages, do not install; please contact us.
We recommend consulting an experienced installer for assistance, and providing the installer with the actual size of our sink to ensure smooth installation.
Please use assistance when lifting the sink in order to avoid personal injury.
We recommend consulting a professional if you are unfamiliar with installing kitchen fixtures and plumbing. DeerValley accepts no liability for any damages to the floor, walls, plumbing or personal injury during installation.

SUGGESTED TOOLS AND MATERIALS

Tools: Framing Square, Safety Glasses, Pencil, Tape Measure, Level, Thread Sealant, Wood Shims, Basin Wrench, Drill, Hacksaw

Sealant: We recommend the use of a stone, marble and granite silicone caulk or a general purpose silicone sealant.

Installation tools are not provided; please prepare them yourself.

3. Installation Steps:

Note: Drop-in Topmount Installation Recommended

Measure the hole for the sink: Turn the sink upside down and trace the outline directly on the countertop with a pencil. Then make a second outline about 5/16 inch smaller than the original for the hole.
Countertop Cut-Out: Drill a starter hole inside of the cutout line. Use the saber saw and cut opening in the countertop following the inside pencil line. Trial fit the sink to check for proper fit.
Supporting the Sink: Mount the undermount installation customized support to the inner side walls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes.

SUPPORTS

Apply silicone caulk (not included) evenly all around the top of the sink flanges. Position and align the sink under the countertop opening. Press the silicone and flange up onto the countertop.
Insert the sink into the opening hole and verify the sink fits correctly in the opening.

3. Basket Sink Strainer Kit Installation Steps:

Step 1: Place the strainer body into the sink drain hole.

Step 2: From underneath the sink, place the rubber gasket, friction washer, and metal washer onto the threaded shank of the strainer body.

Step 3: Secure the strainer with the locknut. Tighten firmly with a basin wrench.

Step 4: Attach the tailpiece to the strainer body.

	Workstation Drop-in Kitchen Sink Installation Guide A comprehensive guide for installing a workstation drop-in kitchen sink, covering prior installation checks, installation options, tools and materials, and step-by-step instructions for sink and strainer kit installation.
	Workstation Drop-in Kitchen Sink Installation Guide Comprehensive guide for installing a workstation drop-in kitchen sink, covering prior installation checks, general recommendations, tools, materials, and step-by-step instructions for sink and strainer kit installation.
	DeerValley Farmhouse Kitchen Sink Installation Guide Step-by-step installation instructions for DeerValley Farmhouse Kitchen Sinks, including preparation, tools, options, and a one-year limited warranty. Learn how to properly install your kitchen sink for optimal performance and longevity.
	DeerValley Two-Piece Pedestal Bathroom Sink Installation Instructions Comprehensive installation guide for the DeerValley two-piece pedestal bathroom sink, covering tools, parts, usage, maintenance, and warranty information.
	DeerValley Toilet with Macerating Pump: Universal Installation Instructions Comprehensive installation guide for DeerValley toilets with macerating pumps, covering tools, accessories, step-by-step setup, and warranty information.
	DeerValley One-Piece Toilet Installation Instructions Comprehensive installation guide for DeerValley one-piece toilets, covering tools, parts, and step-by-step procedures for a successful installation. Includes warranty information and contact details.
	DeerValley One-Piece Toilet Installation Guide Comprehensive installation instructions for the DeerValley one-piece toilet, covering preparation, removal of old fixtures, and step-by-step assembly and connection.
	DeerValley Sliding Shower Door Installation Guide Comprehensive installation guide for the DeerValley Sliding Shower Door, detailing parts, tools, step-by-step instructions, cleaning, maintenance, and warranty information.