DeerValley Sliding Shower Door Installation Instructions

Installation Video

Watch the step-by-step installation video for a detailed demonstration. You can access it via the following URL:

https://youtu.be/hhpQERLQwSw?si=DryTZDXTe_Zn7a_V

Tip: We recommend watching the full video before starting the installation.

Product Breakdown Diagram

The product consists of the following components:

A: Guide Rail Wall Cover (2PC)
B: Guide Rail Sleeve (1PC)
C: Inner Guide Rail (1PC)
D: Pulley (4PC)
E: Wall Entry Plug (7PC)
F: Collision Prevention Strip (4PC)
G: Door Glass (2PC)
H: Lower Water Stop Bar Fixing Parts (2PC)
I: Screw-A (3PC)
J: Lower Slider (1PC)
K: Lower Water Stop Bar (1PC)
L: Pulley Anti-Detachment Component (4PC)
M: Screw-B (4PC)
N: Handle (2PC)
O: Template (2PC)

Delivery Notes

Upon receiving the product, please immediately inspect for any transportation damage, missing parts, or manufacturing defects.

Cleaning and Maintenance

For daily cleaning, use common liquid detergent and a soft cloth.
For stains, use a clean soft towel or a small amount of neutral soap solution or toothpaste to gently wipe.
To keep the glass surface shiny, use a polishing agent.

Precautions

Do not use acidic, alkaline, or sharp tools during cleaning to avoid damaging surfaces.
Avoid strong detergents containing acetone or ammonia. When disinfecting, avoid disinfectants containing formic acid and formaldehyde.
Do not allow body or hard objects to impact the glass surface during showering to avoid accidents.
Regularly check the usage condition of the door. If abnormalities are found, contact the after-sales service department promptly.

Tool List (Not Included)

Material Name	Illustration	Material Name	Illustration
Tape measure	[Tape measure]	Electric drill	[Electric drill]
Spirit level	[Spirit level]	Hammer	[Hammer]
Marker pen	[Marker pen]	Screwdriver	[Screwdriver]
1/4" drill bit	[1/4" drill bit]	Allen wrench	[Allen wrench]
Utility knife	[Utility knife]	Silicone sealant	[Silicone sealant]

Installation Steps

Step 1: Marking

As shown in the diagram, first measure the level of the hole marking template with a level. Then mark each hole with a pencil.

Diagram Description: Shows a shower enclosure outline with a template being leveled and marked.

Step 2: Installation of Lower Water Stop Bar

Use a 1/4" drill bit to create holes for marking points.

Insert wall plugs into the holes made on the base/floor surface, ensuring their end face is flush with the base/floor surface.

Diagram Description: Illustrates drilling holes, inserting wall plugs, and attaching the lower water stop bar. Components used: Screw-A (3PC), Lower slider (1PC), Lower Water Stop Bar (1PC), Lower Water Stop Bar Fixing Parts (2PC), Wall Entry Plug (3PC).

Special Reminder: Measurement for Upper Guide Rail

Before proceeding, determine the correct distance for the upper guide rail components from the floor. The Guide Rail Wall Cover (No: A) should be positioned 1812 mm (71.34 inches) above the bottom surface where you are installing it. This measurement is from the floor or the top edge of the shower base.

Diagram Description: Shows a side view of a shower wall with a measurement line indicating 1812mm (71.34 inches) from the floor to the Guide Rail Wall Cover.

Step 3: Installation Sequence of Upper Guide Rail

Ensure horizontal alignment during installation. Attach the Guide Rail Wall Sleeves (No: A1, A2, A3), Guide Rail Cover (No: B), and Inner Guide Rail (No: C) using Screw-B (No: M) and Wall Plugs (No: E).

Diagram Description: Illustrates the sequence of attaching the upper guide rail components to the wall.

Step 4: Assemble the Door Glass Accessories

Install the Pulleys (No: D) and Collision Prevention Strips (No: F) onto the Door Glass (No: G). Ensure the two doors are opposite each other and pay attention to assembly.

Diagram Description: Shows the door glass with pulleys and collision prevention strips being attached. Components used: Pulley (4PC), Door Glass (2PC), Handle (2PC), Collision Prevention Strip (4PC).

Step 5: Hanging the Door Glass / Adjusting Horizontal Alignment

When hanging the door glass, pay attention to the inner and outer door grooves. They are opposite each other, as are the handles. Do not install them backwards, or the door glass will not move.

The door glass is considered qualified when it remains stable in an upright position without shaking. ✔️

Diagram Description: Shows the door glass being hung and adjusted. Includes a visual guide for checking stability.

Step 6: Install Anti-Detachment Accessories

Install the Pulley Anti-Detachment Components (No: L) onto the door glass. Ensure the component is snug against the guide rail.

Diagram Description: Illustrates the installation of anti-detachment positioning parts for the door glass.

Final Check and Waterproofing

After installation, confirm that there are no abnormalities. Apply glass glue for waterproofing.

Icons: [24h timer], [spray], [prohibited]

One Year Limited Warranty

DeerValley products are made with quality materials and excellent craftsmanship. This warranty covers defects in materials or craftsmanship under regular use for one year from delivery. DeerValley will provide replacement parts at no charge or replace the product if deemed defective.

Warranty Coverage:

Applies only to the original purchaser; proof of purchase is required.
Scratches are not covered.
Manufacturer warrants the product to be free of manufacturing defects for the warranty period. Keep original invoice as proof.
DeerValley may, at its option, repair or replace defective parts/products, issue a refund (within 30 days of delivery), or issue a credit. Shipping/delivery charges may apply.
DeerValley recommends professional installation. DeerValley is not responsible for damage or failure due to improper installation, misuse, or failure to use a licensed professional. Removal or installation costs are not covered.
Warranty excludes goods subject to accident, negligence, improper installation, product abuse, misuse, or use of abrasive cleaners, alcohol, or organic solvents.
DeerValley's responsibility is limited to replacement parts; labor charges and consequential damages are not covered.
This warranty is in lieu of all other warranties, expressed or implied.

Responsibilities of Others:

Installers/contractors are responsible for inspecting the unit for defects or damage prior to installation.
DeerValley is not responsible for failures or damage that could have been discovered, repaired, or avoided by proper inspection.
Damage occurring in transit is the responsibility of the carrier. Inspect the unit upon delivery and report any damage immediately in writing to the seller and carrier.

Limitations and Exclusions:

Does not cover negligence, misuse, abuse, improper installation, accidents, hard water/mineral deposits, corrosive materials, misapplication, improper maintenance, or alterations.
Warranty is void if product is altered or unauthorized repairs are attempted.
DeerValley is not liable for loss of use, inconvenience, or incidental/consequential damages.

Disclaimer:

No other warranties or representations are made by dealers or other persons.

Warranty Service:

To obtain warranty service, have the following ready:

Copy of original invoice
Date of installation
Description and pictures of defect
Model number or description

Contact DeerValley Customer Service for assistance. DeerValley will determine the appropriate resolution (repair, replace, refund, or credit).

Models: DV-1SD052, DV-1SD053, DV-1SD056, DV-1SD052 Series Sliding Shower Door, DV-1SD052 Series, Sliding Shower Door, Shower Door, Door

File Info : application/pdf, 14 Pages, 3.41MB

442bd721-f7ac-40d6-bc43-d243b0ded995

References

DeerValley Official | Bathroom & Kitchen | Smart Toilets and More

Adobe PDF library 16.03

Related Documents

	DeerValley Sliding Shower Door Installation Guide (Model DV-1SD057) Step-by-step installation instructions for the DeerValley Sliding Shower Door (Model DV-1SD057), including parts list, diagrams, maintenance, and warranty information.
	DeerValley One-Piece Toilet Installation Instructions Comprehensive installation guide for DeerValley one-piece toilets, covering tools, parts, and step-by-step procedures for a successful installation. Includes warranty information and contact details.
	DeerValley Farmhouse Kitchen Sink Installation Guide Step-by-step installation instructions for DeerValley Farmhouse Kitchen Sinks, including preparation, tools, options, and a one-year limited warranty. Learn how to properly install your kitchen sink for optimal performance and longevity.
	DeerValley One-Piece Toilet Universal Installation Instructions This document provides universal installation instructions for DeerValley one-piece toilets. It covers essential preparation steps, a list of suggested tools and materials, a parts list, detailed step-by-step installation procedures, and comprehensive warranty information. Includes guidance on removing the old toilet, installing closet bolts, wax ring, positioning the toilet, connecting water supply, and toilet seat installation for models DV-F816S01 and DV-F812S01.
	DeerValley Toilet with Macerating Pump: Universal Installation Instructions Comprehensive installation guide for DeerValley toilets with macerating pumps, covering tools, accessories, step-by-step setup, and warranty information.
	DeerValley Smart Toilet DV-1S0029-V1 Installation and Owner's Manual Comprehensive installation and owner's manual for the DeerValley Smart Toilet (Model DV-1S0029-V1), covering safety precautions, installation steps, operation, maintenance, and troubleshooting.
	DeerValley Two-Piece Pedestal Bathroom Sink Installation Instructions Comprehensive installation guide for the DeerValley two-piece pedestal bathroom sink, covering tools, parts, usage, maintenance, and warranty information.
	DeerValley DV-1F0379-CF Liberty Wall-Hung Toilet \| Features & Specifications Explore the DeerValley DV-1F0379-CF Liberty, a modern wall-hung toilet featuring a quiet siphonic dual flush, concealed tank, and easy-to-clean design. View specifications, accessories, and warranty information.