QUICK START GUIDE

1 Connecting to TV

The Best

Diagram shows a TV connected to the MEGATEK DVD player via HDMI for video/audio and RCA cables (red, white, yellow) for audio.

2 Using the Remote Control

Diagram illustrates inserting two AAA batteries into the remote control, noting polarity (+/-), and pointing the remote at the player's sensor.

Remote Control Battery Installation:

• Remove the cover of the battery compartment.
• Install two AAA size batteries, matching the "+" and "-" ends with the diagram inside.
• Replace the cover until it clicks.
• Point the remote control towards the main unit's remote control sensor for operation.

3 Power on

1. Insert the power plug into the socket correctly.
2. Press the power button on the unit or remote control to turn on the unit.

Note: Unplug this apparatus during lightning storms or when unused for long periods of time.

Diagram shows the DVD player plugged into a socket, with a hand pressing the power button on the unit or remote.

4 Selecting OSD Menu Language

Diagram shows the remote control and menu screenshots, guiding users to select OSD LANGUAGE, AUDIO LANG, or SUBTITLE LANG via the SETUP menu.

Follow these steps to select the OSD menu language:

1. Press the SETUP button on the remote control.
2. Navigate using the directional buttons to find the OSD LANGUAGE setting.
3. Select the desired language using the OK button.

5 Playing a Disc

5.1 Opening the Disc Tray

Diagrams show the disc tray opening, a disc being placed label-up, and the tray closing.

5.2 Placing a Disc

1. Hold the disc by the center hole and edges.
2. Place the disc in the compartment with the label-side facing up.

5.3 Removing the Disc

Diagram shows the disc tray open with a disc inside, ready for removal.

5.4 Playing the Disc

Diagram shows the DVD player unit with the disc tray closed, indicating the disc is ready to play.

5.5 Cleaning the Disc

Diagram shows cleaning a disc from the center outwards with a soft, lint-free cloth.

6 Playing a USB Flash Drive

Diagram shows a USB flash drive being inserted into the USB port on the rear of the DVD player.

1. Press the USB button on the remote control to change the input source to "USB".
2. Insert a USB flash drive into the USB port on the unit.
3. Use the directional buttons on the remote control to select your desired content.
4. Press the play button (▶) to start playback.