MEGATEK CB-M25BT QUICK START GUIDE
1 Power on / off
Connect the AC adapter to the AC IN port. Wait for 2-3 seconds for the unit to fully turn on.
2 Install batteries (optional)
Requires 4 UM-2 1.5V batteries (not supplied). Ensure correct polarity when inserting batteries.
3 Overview of the main unit
- VOLUME -/+: Adjusts the sound volume.
- POWER on/off: Turns the unit on or off.
- Prev / Fast rewind: Moves to the previous track or rewinds.
- Source mode / EQ: Selects the audio source or Equalizer mode.
- Headphone jack: Connect headphones here.
- USB port: For connecting USB storage devices.
- FM tuning: Adjusts the FM radio frequency.
- Play / Pause / Scan: Controls playback or scans for stations.
- Next / Fast forward: Moves to the next track or fast forwards.
- Stop / Repeat: Stops playback or repeats a track/album.
- Aux in: Connect external audio devices via the Aux input.
4 Source modes
Press the MODE/EQ button repeatedly to select your desired source: CD, USB, AUX, Bluetooth, or Radio. Press and hold the MODE/EQ button to select an EQ mode: Flat, Classic, Rock, POP, or Jazz.
5 Placing a Disc
Open the CD compartment. Place a CD with the label-side facing up. Close the compartment securely.
6 Adjust volume
Turn the volume knob clockwise to increase the volume up to level 32. Turn counter-clockwise to decrease the volume.
7 Radio Mode
Press the PLAY/PAUSE/SCAN button to listen to pre-stored channels. Press and hold the PREV/NEXT buttons for two seconds to automatically search for the next or previous station.
8 Connect Bluetooth
On your Bluetooth device, go to Settings > Bluetooth and select 'Megatek CB-M25BT' from the list of available devices.
9 USB Mode
Insert a USB flash drive into the USB port. The unit supports capacities up to 128GB and FAT16/FAT32 file systems. NTFS is not supported. Only MP3/WMA music files are playable.
10 AUX IN Mode
Connect an external audio device to the 'Aux in' port using a 3.5mm audio cable.