Connect IT CMH-9100-BK Wheeled Mount for Flat Screen
Model: CMH-9100-BK
Brand: connect IT
Introduction
This manual provides instructions for the Connect IT CMH-9100-BK wheeled mount for flat screens. Please read all instructions carefully before use. An electronic version of this manual is available at www.connectit-europe.com. It is recommended to keep the original packaging, invoice, and warranty certificate for the duration of the warranty.
Warnings
- ⚠️ Installation requires assistance from another person.
- ⚠️ Tighten screws properly, but do not strip threads to avoid damaging the screen or reducing the mount's load capacity.
- ⚠️ This wheeled mount is designed for indoor use only. Outdoor use may cause harm or damage.
- ⚠️ Check the mount's stability and safety at least every three months.
Specifications
| Color | Black |
| Assembly | Quick and easy |
| Screen Compatibility | Fits most flat screens up to 70 inches |
| Max. Load Capacity | 40 kg |
| VESA Compliance |
|
| VESA Horizontal Range | min. 100 mm - max. 600 mm |
| VESA Vertical Range | min. 75 mm - max. 400 mm |
| Height | 1616 mm (Adjustable range: 1412/1332/1252/1172 mm) |
| Width | 850 mm |
| Depth | 615 mm |
| Shelf Height from Base | 455 mm |
| Shelf Depth | 290 mm |
| Pole Diameter | 50 mm |
| Tilt Angle | +/- 10 degrees |
Package Contents
The package includes the following parts:
- 1: 1x Pole
- 2: 2x Base Legs
- 3: 2x Base Legs
- 4: 4x Casters [☸️]
- 5: 2x Vertical Arms
- 6: 2x Support Brackets
- 7: 8x M6x16 screws [?]
- 8: 1x Cable Tie [?]
- 9: 1x Allen Key [?]
- 10: 1x Shelf
- 11: 2x Mounting Plates
- 12: 1x Main Pole Assembly
- 13: 2x TV Brackets
- 14: 2x TV Brackets
Hardware includes various screws (M8x60, M8x25, M6x15, M8, M6x30, M8x15, M6x10, M8x45), washers (D8x5, D8x10, φ4/φ6/φ8), and specific washers (5mm, 6mm, 13mm).
Assembly Instructions
-
Step 1: Assemble the Base
Attach the casters (4) to the base legs (2 and 3). Connect the base legs together to form the wheeled base.
-
Step 2: Attach Main Pole
Mount the main pole assembly (12) onto the assembled base. Ensure the wheels are correctly oriented. The nut can be turned to adjust the height of the wheel.
-
Step 3: Attach Vertical Arms
Attach the two vertical arms (5) to the main pole assembly.
-
Step 4: Attach Support Brackets
Secure the support brackets (6) to the vertical arms using screws (F, E, B).
-
Step 5: Install Shelf
Attach the shelf (10) to the support brackets using screws (C, F).
-
Step 6: Attach Mounting Plates
Fasten the mounting plates (11) to the vertical arms using screws (G, F).
-
Step 7: Secure Main Pole
Connect the main pole to the base using screws (7, B, F).
-
Step 8: Attach TV Brackets
Mount the TV brackets (13, 14) onto the vertical arms using screws (E, F, B, D).
-
Step 9: Mount TV
Carefully place your flat screen TV onto the mounted brackets. Ensure the adjusting handle is on the outside. Use the appropriate screws (M-G/H/NO or M-I) and washers (K) to secure the TV to the brackets, ensuring compatibility with your TV's VESA mounting holes.
-
Step 10: Secure and Organize
Use the provided cable tie (8) to manage cables. Lock the safety screw to ensure the TV is securely attached.
Notes
This section is for user notes.
europe.com
