Connect IT Hyperbass BEAT+ Party Speaker - User Manual and Specifications

Introduction

Welcome to the user manual for the Connect IT Hyperbass BEAT+ Party Speaker. This guide provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and enjoyment.

Product Features

• Powerful sound output for parties and events
• Bluetooth connectivity for wireless audio streaming
• Multiple input options: USB, SD Card, AUX
• Microphone input for karaoke or announcements
• Durable and portable design
• Easy-to-use controls

Product Overview

The Connect IT Hyperbass BEAT+ is a robust party speaker designed for powerful sound. It features a durable casing, typically black, with a prominent speaker grille. The top panel usually houses controls and connectivity options, while the front displays the brand logo.

Front Panel Layout

The top surface of the speaker typically includes a power button [power-symbol], volume up/down buttons, a play/pause/mode button, and possibly track skip buttons. LED indicators might show power status or Bluetooth connectivity. A 6.35mm microphone input jack is often present for karaoke or announcements.

Rear Panel Layout

The back panel usually contains the main power switch, the AC power input port, a USB port for media playback, an SD card slot, and an AUX input (3.5mm or RCA) for wired audio sources. There might also be a speaker output port to connect additional passive speakers.

Connections and Operation

Bluetooth Pairing

To connect wirelessly, turn on the speaker and activate Bluetooth on your mobile device. Search for available devices and select 'Hyperbass BEAT+' from the list. Once paired, the speaker will confirm the connection.

Wired Connections

Audio can be connected via the AUX input using a 3.5mm cable or RCA cables. Connect the audio source's output to the speaker's AUX input.

Microphone Connection

Plug a microphone into the 6.35mm microphone jack on the front panel. Adjust the microphone volume using the dedicated control if available.

Powering On/Off

Press the power button [power-symbol] to turn the speaker on or off. Ensure the main power switch on the rear panel is also in the 'ON' position.

Playback Modes

The speaker supports playback from Bluetooth, USB, SD card, and AUX input. Press the 'Mode' button to cycle through available input sources.

Specifications

Troubleshooting

• No Power: Ensure the power cable is securely connected and the main power switch is ON.
• No Sound: Check volume levels, ensure the correct input source is selected, and verify audio cable connections.
• Bluetooth Not Connecting: Make sure the speaker is in pairing mode and within range. Turn off other Bluetooth devices that might be interfering.

Safety Information

Read all instructions before use. Do not expose the speaker to water or extreme temperatures. Do not attempt to disassemble the unit. Ensure proper ventilation.