RASTAR 76960 Robot Instructions
General Information
Thank you for purchasing RASTAR products. To ensure correct and safe operation of the robot, please read this manual carefully before use. This manual applies to product type 76960.
RASTAR GROUP
Add: Xinghui Industrial Park, Xiadao Road, Shanghua, Chenghai, Shantou, Guangdong, China.
Http://www.rastar.com
Features and Functions
This product utilizes infrared communication technology and an intelligent system, offering extensive applications, high response speed, and precision.
Key Functions: Forward, Reverse, Turn Left, Turn Right, Dancing, Songs, Lights, Launch Bullets, Launch Flying Saucer, Programming, Demonstration.
Demonstration Modes:
- Basic Action Mode: Includes "Merch move", "space walk", "turn left/right", "lift left/right hand", "Fire", "slide back".
- Kung Fu Mode: Demonstrations include "raise left hand, slide forward and sprint" and "left foot forward, hands up, turn right".
- Combat Mode: Demonstrations include "Fight begins" with various turns and "Fire" actions.
Space Walk: The robot walks forward/backward and turns left/right with sound.
Sliding: The robot performs sliding forward/backward and turning actions with sound.
Operation Instructions
Before Playing:
- Insert 2 "AA" batteries into the remote controller and close the battery cover.
- Assemble the 4.8V battery into the robot.
- Switch the robot to the "ON" position. The indicating light will flash when functions are ready.
Battery Power Indicator: If the remote control light dims or the robot slows down, the battery power is insufficient and needs replacement.
Remote Control Range: Aim the remote control at the robot's head for optimal range, less than five meters.
Interference Prevention: Avoid playing multiple robots in the same area (within 10 meters) simultaneously to prevent interference.
Environment: Do not expose the robot to direct heat or glare. Switch off the robot when not in use.
Command Mode: The robot operates on a single command mode; multiple function keys cannot be operated simultaneously.
After Playing: Switch the robot to the "OFF" position.
Voice Commands: Upon startup, the robot may announce "Spaceman, fight begins. Sir, please give task!".
Power Saving: After 120 seconds of inactivity, the robot enters intelligent power saving mode. Pressing the reset button wakes it up. Pressing the reset button during normal operation with the voice prompt "Spaceman, Task over, Homing" also initiates power saving mode.
Specific Functions:
- Lift/Lower Left Arm: Press "Lift the left arm" to raise it; hold to reach the highest. Press "Lower the left arm" to lower it; hold to reach the lowest.
- Lift/Lower Right Arm: Press "Lift the right arm" to raise it; hold to reach the highest. Press "Lower the right arm" to lower it; hold to reach the lowest.
- Launch Bullets: Press the "Launch bullets" button to fire bullets.
- Launch Flying Saucer: Press the "Launch flying saucer" button to fire the flying saucer. If launching fails, press the reset button for 1.5 seconds for re-launching.
- Speed Mode: Pressing "Speed mode" toggles between "fast mode" (says "space mode") and "slow mode" (says "earth model").
- Stop: Pressing the "Stop" button immediately halts all functions and enters standby state.
- Volume: Pressing the "Volume" button adjusts sound volume in four grades.
- Programming: Press the "Programming" button to program sequences of up to 50 directives (excluding Lights, Stop, Speed Mode, Volume). Pressing "Programming" again executes the programmed sequence.
- Songs: Press "Songs" to play songs; press again to play the next song.
- Lights: Cycle through five light modes (Bright, Breathing, Gradual, Shine, Off) by pressing the "Lights" button.
- Dancing: Press the "Dancing" button to initiate dancing.
Battery Charge Instruction
- Before first use or after a long period of disuse, charge the battery using the provided USB wire. Connect the USB wire to a USB port on a desktop, laptop, mobile power source, or USB power socket.
- Remove the battery from the robot before charging. Connect the battery to plug B of the USB wire, then connect plug A to the power source.
- The indicator light on the USB wire will turn on and flash approximately every 3 seconds (1.5 seconds per flash) when charging.
- Charging is complete when the indicator light turns off. Power is automatically cut off.
- If the indicator light does not turn on, the battery is fully charged.
- It takes 4 to 5 hours to fully charge the battery at rated voltage. The charge time should not exceed 10 hours.
Maintenance
- Remove batteries when the unit is not in use for extended periods.
- Clean the robot with a soft cloth.
- Avoid heating or exposing to strong sunlight.
- Keep the robot dry.
- Regularly inspect the robot for any damage to wires, plugs, enclosure, or other parts. Do not use if damage is found until repaired.
- Do not squeeze the bullets or flying saucer.
Warm Reminder
Please do not force the arm, so as not to affect its function.
Warnings
- WARNING: Please do not aim the "bullets" at eyes or face. Only the "bullets" supplied with the product are allowed to be used.
- WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years.
Caution
- CAUTION: Do not mix different types of batteries or new and used batteries. Remove exhausted batteries from the toy.
- Batteries should be replaced by an adult. Ensure correct polarity when inserting batteries. Do not short-circuit the supply terminals.
- Non-rechargeable batteries are not to be recharged. Remove rechargeable batteries from the toy before charging.
- Batteries are to be charged by an adult or by children aged 8 years and above. Do not charge leaked or broken batteries.
- Rechargeable batteries should only be charged under adult supervision.
- Use batteries of the same or equivalent type.
- The USB charging line is not a toy.
- Only use the supporting USB charging line provided by RASTAR GROUP.
- Slight heating of the USB charging wire and battery during charging is normal.
- Regularly check USB charging wires and batteries for damage.
- If the indicator light flashes three times faster than normal, there may be a circuit or battery issue. Disconnect the USB plug immediately and send the product for examination and repair.
- Ensure the USB plug is receiving normal power before charging.
- If the battery cannot be charged, check the battery or USB wire for damage, or ensure the USB plug is not blocked by foreign objects.
Troubleshooting
If the indicator light flashes three times faster than the normal speed, it indicates a problem with the circuit or battery. Disconnect the USB plug immediately and send the product to a local service center or distributor for examination and repair.