RASTAR INSTRUCTIONS

Applicability

This manual is applicable to the following product models: 53800, 98500, 93300, 93400, 94800.

Note: Images provided are for reference only and are subject to the actual product.

General Advice & Safety

For optimal preservation of rechargeable batteries, please recharge them regularly. Use only a charger of the same or equivalent type. Dispose of batteries responsibly; do not dispose of them in fire. ?

When your vehicle begins to lose power, its functions or performance may degrade. This indicates it's time to refresh your batteries or recharge them. ?

Do not operate your car on streets where people gather or near high voltage wires. Prioritize safety! ⚠️

Avoid driving your vehicle in sand, through water, or snow. ??❄️

To ensure optimal performance, point the remote control antenna upward towards the car and operate within the effective range. ?

Do not place your vehicle near heat sources or in direct sunlight. Always ensure switches are turned OFF after operation. ☀️➡️❌

Operation Guide

Step 1: Battery Installation

The chassis fixing piece can be used to secure the battery cover lock. Refer to picture 1.

For the Car: Open the battery cover, insert 3 x 1.5V "AA" batteries according to polarity, close the cover, and secure it with the chassis piece.

For the Controller: Open the battery cover, insert 2 x 1.5V "AA" batteries according to polarity, close the cover, and rotate the knob to lock it. Refer to picture 1.

Step 2: Transmitter Pairing

Before each use, the transmitter must be paired with the model car.

Pairing Process:

1. The LED indicator on the transmitter will blink, indicating it is ready for pairing.
2. Switch on the model car.
3. Once the LED indicator on the transmitter turns off, the pairing process is complete. The model car can now be fully controlled by the transmitter. Refer to picture 3.

Step 3: Direction Adjustment

Use the direction adjustment switch to ensure the car drives in a straight line.

Step 4: Low Battery & Interference

Replace the battery when the LED indicator becomes dim, signaling low battery power. ?

The model car's speed will decrease when the battery is low. Replace batteries promptly.

2.4GHz transmitters allow multiple model cars to be controlled simultaneously without interference, provided pairing is done sequentially. First, complete pairing for the initial model car and keep it powered on, then proceed to pair the second model car with its transmitter.

Step 5: Power Off

Remember to turn off the model car after playing.

Features & Function

This product utilizes 2.4GHz communication technology, enabling multi-device and multi-user compatibility with fast response speeds, high precision, and robust anti-interference capabilities.

Key Components:

• Direction Adjustment: Controls the vehicle's steering.
• Battery Compartment: Houses the batteries for the vehicle.
• On-Off Switch: Powers the device on or off.

Functions:

The vehicle supports Forward, Reverse, Turn Left, and Turn Right movements.

Features:

The vehicle boasts authentic car styling with an injection-moulded body and an independent suspension system.

Maintenance

• If the unit will not be used for an extended period, remove the batteries.
• Clean the vehicle using a soft cloth.
• Avoid exposing the vehicle to high temperatures or direct sunlight.
• Keep the vehicle dry.
• Periodically inspect the toy for any damage to its wires, plug, enclosure, or other parts. Do not use the toy until any damage has been repaired.

Caution

• Do not mix different types of batteries, or new and used batteries.
• Remove exhausted batteries from the toy.
• Battery replacement should be performed by an adult.
• Ensure batteries are inserted with the correct polarity.
• Do not short-circuit the supply terminals.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the toy before charging.
• Rechargeable batteries should only be charged under adult supervision.
• Do not charge leaked or damaged batteries.
• It is recommended to use only batteries of the same or equivalent type.
• Never place batteries near fire, heat sources, water, or direct sunlight.
• If leaked battery fluid comes into contact with skin or clothing, wash the affected area immediately.

Technical Specifications

Frequency bands: 2400MHz to 2483.5MHz

Maximum Transmitting Power (EIRP): Not more than 10mW.

Important Warning

CHOKING HAZARD - Small parts.

Not suitable for children under 3 years.

Keep these instructions for future reference as they contain important information.

Manufacturer Information

RASTAR GROUP

Add: Xinghui Industrial Park, Xiadao Road, Shanghua, Chenghai, Shantou, Guangdong, China.

Website: http://www.rastar.com