Omnilux Contour FACE Quick Start Guide

STEP 1

Before using your mask, charge the controller using the supplied cable and plug. The controller must be charged on its own (not attached to the mask) by the cable and plug that connects to the wall socket. Please do not charge your controller with the mask still plugged in, as this may cause damage to the battery.

[Illustration of controller charging]

STEP 2

Once fully charged (all 3 charging lights will be illuminated), detach the controller from the charging cable.

NOTE: Please do not charge the controller with the mask still connected. The Omnilux Contour FACE will not work if plugged into the controller while it is charging, and this can cause damage to the device & battery over time.

[Illustration of controller detached from mask, with a red cross over charging while connected]

STEP 3

Connect the mask to the other end of the controller. To reiterate, the Omnilux Contour FACE is operated by the supplied controller, making it completely portable.

[Illustration of mask connected to controller]

STEP 4

The mask is designed to sit comfortably on your face. It should feel secure but not overly tight.

[Illustration of mask on face]

STEP 5

Activate the controller by pressing down on the button for one second. Each session is 10 minutes, and your device will automatically shut off when the treatment is complete. We recommend using for 4-6 weeks and then continued maintenance thereafter for all natural, radiant-looking skin!

[Illustration of controller button being pressed]

STEP 6

Store your device flat if possible and clean the treatment surface as needed with a damp cloth or a non-irritating water-based wipe. For deeper cleaning, wipe gently with 70% alcohol.

[Illustration of mask being stored and cleaned]

Any questions? Scan the QR Code on your smartphone or visit omniluxled.com/apps/help-center for more detailed instructions on how to get the most from your Omnilux Contour FACE.

[QR Code]

omniluxled.com