Schlage CTE ENGAGE Single Door Controller with Mobile Enabled Multi-Technology Reader
Overview
The CTE is an ENGAGE™ enabled single opening controller that allows perimeter and common area openings to be managed in a single system along with Schlage Control® Mobile Enabled Smart Locks, NDE cylindrical and LE mortise wireless locks. It is ideal for multifamily, commercial mixed use and retail store front applications.
The CTE is designed to work with a Schlage® mobile enabled multitechnology credential reader and interface with an electrified lock, electromagnetic lock, electric strike, automatic operator, or exit device to control an opening.
The CTE single door controller is designed for flexibility and can be managed with ENGAGE™ web and mobile apps or with one of our Physical Access Control Software (PACS) provider systems.
Features & Benefits
- Enables around the door solution with ENGAGE functionality
- Built-in Bluetooth® and Wi-Fi®
- Complete with Schlage MTB11 or MTB15 reader (required reader interface RS-485)
- No-Tour¹ capable
- Flexible connectivity options: manage with ENGAGE web and mobile apps or with one of our PACS providers
- Inputs: door position (DPS), request to exit (REX), request to enter (REN), remote release (REL)
- Outputs: lock relay, alarm relay, auxiliary (Aux) relay
- Input Power: 12 or 24 VDC or Power over Ethernet (PoE/PoE+)
- Provides DC output power and dry control contacts
Check out our Schlage Credential Services: Commercial.Schlage.com
CTE Single Door Controller Specifications
| Specifications | Details |
|---|---|
| Credentials | Up to 5,000 |
| Audits | Up to 2,000 |
| Schedules | Up to 16 |
| Holidays | Up to 32 |
| Time zones | Up to 16 |
| Communication standards | Bluetooth® Low Energy (version 4.2) 2.4 GHz Wi-Fi® (IEEE 802.11b/g/n) WPA2, WPA, WEP, 802.1x (PEAP) Transport Layer Security (TLS) version 1.2 Advanced Encryption Standard (AES), 256-bit |
| Gateway communication range | Up to 30' in typical building environments. A detailed site survey is recommended. Reference ENGAGE™ Gateway data sheet for additional details. |
| Connectivity options | Mobile (send updates at door) Wi-Fi access point (automatic daily updates) ENGAGE Gateway, IP to host (Networked wireless reader interface) |
| Power inputs | No-Tour¹ 12 or 24 VDC at 3 amps input for powered outputs to get Max 2 amp output on relays, 0.5 amp minimum input when using dry contacts. PoE/PoE+ (IEEE 802.3af/at) |
| Powered outputs: Locking mechanism, alarm, aux | 12 VDC input: 2A @ 12 VDC max (combined output across powered outputs) 24 VDC input: 2A @ 24 VDC max (combined output across powered outputs) PoE input: 0.5A @ 12 VDC max (combined output across powered outputs) PoE+ input: 1.5A @ 12 VDC max (combined output across powered outputs) |
| Dry outputs: locking mechanism, alarm, aux | Locking mechanism: 2A @ 30 VDC max |
| Reader interface | 0.3A @ 12 VDC Max (up to 500 ft.) 12 or 24 VDC input: 12V @ 0.3A max output PoE or PoE+ input: 12V @ 0.3A max output Aux: 2A @ 30 VDC max Alarm: 2A @ 30 VDC max Reader (Schlage MTB11 or MTB15) (Required to utilize -485 interface) |
| Signal inputs | Request-to-Enter (REN) Request-to-Exit (REX) Remote Release (REL) - wired Door Position Switch (DPS) Tamper (TAMP) |
| Operating temperature (indoor) | -31°F (-35°C) to 151°F (66°C) |
| Operating humidity | 0-100% Non-condensing |
| Certifications | UL 294 Indoor, FCC Part 15, NEMA Enclosure Indoor (Type 1, 4, and 4X), ULC S319 Indoor, RoHS |
| Dimensions | 2.96" x 5.89" x 7.86" |
¹ With MT20W and smart credential or mobile credential (consult your access control software provider for specific support).
Application Examples
The CTE single door controller with mobile enabled multi-technology reader kit can be used in a variety of applications. Below are a few examples:
Application 1: Electric Strike
Configuration: ENGAGE™ cloud via mobile device or Wi-Fi, or PACS provider via Wi-Fi or GWE with IP to host, connected to CTE, which interfaces with a Schlage MTB11 or MTB15 reader, an FSE 5100 electric strike, a PoE+ switch, and an optional PS902 power supply.
Operation: Presenting a valid credential to the Schlage MTB11 or MTB15 reader will cause the fail-secure 5100 electric strike to release for authorized entrance. Free egress is always permitted.
Products: Schlage offers a variety of electric strikes from Locknetics® and Von Duprin®, as well as Schlage Power Supplies to meet the specific needs of the opening.
Application 2: EL Panic Device
Configuration: ENGAGE™ cloud via mobile device or Wi-Fi, or PACS provider via Wi-Fi or GWE with IP to host, connected to CTE, which interfaces with a Schlage MTB11 or MTB15 reader, an RX EL panic device, a PS914-2RS 24VDC power supply, and a Door Position Switch (DPS).
Operation: Presenting a valid credential to the Schlage MTB11 or MTB15 reader will cause the EL panic device to retract for authorized entrance. Free non-alarmed egress is permitted at all times.
Products: Schlage offers a variety of Falcon® and Von Duprin exit devices, and Von Duprin power supplies to meet the specific needs of the opening.
Application 3: QEL Panic Device
Configuration: ENGAGE™ cloud via mobile device or Wi-Fi, or PACS provider via Wi-Fi or GWE with IP to host, connected to CTE, which interfaces with a Schlage MTB11-485 or MTB15-485 reader, a 9500 Senior Swing QEL panic device, a PS902 24VDC power supply, and a Door Position Switch (DPS).
Operation: Presenting a valid credential to the Schlage MTB11 or MTB15 will cause the QEL panic device to retract for authorized entrance and enable the exterior actuator. Free non-alarmed egress is permitted at all times. The interior actuator is always active to retract the QEL panic and open the door.
Products: Schlage offers a variety of hardware and accessories from Von Duprin, LCN®, Schlage, and Locknetics to meet the specific needs of the opening.
Reader Requirement
The CTE Single Door Controller Kit is Available with Two Reader Options and Two Cover Options:
- CTE-MTB11: CTE with mobile enabled multi-technology mullion reader kit
- CTE-MTB15: CTE with mobile enabled multi-technology single gang reader kit
- 47317558-SCH-B: MTB11: Standard reader cover - Black, Schlage Bluetooth logo
- 47317564-SCH-B: MTB15: Standard reader cover - Black, Schlage Bluetooth logo
- 47744033-SCH-B: MTB11 C2: Reader cover - Black, Schlage Bluetooth logo
- 47744034-SCH-B: MTB15 C2: Reader cover - Black, Schlage Bluetooth logo
Notes:
- Reader color (black or cream) can be specified; black is the default
- Custom reader configuration can be specified
- Required to utilize RS-485 interface
Credential Compatibility
Mobile Enabled Multi-Technology Reader Specification
| Compatibility Type | Details |
|---|---|
| Proximity credential compatibility | Compatibility: Schlage®, ISONAS™, HID®, GE/CASI ProxLite®, AWID® and LenelProx® Schlage credential style formats: Clamshell, ISO card, ISO card with magnetic stripe, keyfob, thin keyfob, and PVC adhesive disc |
| Smart credential compatibility¹ | Secure sector compatibility: Schlage MIFARE Classic®, Schlage MIFARE Plus®, Schlage MIFARE® DESFire® with PACSA CSN only compatibility²: HID iClass®, Inside Contactless Pico Tag®, MIFARE Classic/Plus/DESFire, ST Microelectronics®, Texas Instruments Tag-It®, Phillips I-Code® Schlage credential style formats: Clamshell, ISO card, ISO card with magnetic stripe, keyfob, thin keyfob, wearable wristband, PVC adhesive patch |
| Mobile credential compatibility³ ⁴ | Compatibility: Schlage Mobile Bluetooth® Credential³, Integrated PACS Mobile Credential with Bluetooth⁴, NFC mobile credentials in Apple Wallet® and Google Wallet™⁴ |
¹ No-Tour applications using smart credentials require minimum memory size of 8k bit/1K byte.
² Configuration card required to enable CSN.
³ Supported through ENGAGE.
⁴ Dependent on PACS provider integrations and capabilities. Go to us.allegion.com/alliances for more information.
⁵ Proximity bit lengths greater than 37 not supported.
Integration and Cybersecurity
The CTE can operate in the same system as Schlage Control®, NDE and LE wireless locks. Manage with ENGAGE™ cloud based web and mobile apps or with one of our PACS providers. To learn more, visit allegionengage.com.
Allegion takes a broad and deep approach to ensuring the safety and security of its products. The cybersecurity program at Allegion is designed around four pillars: security and privacy by design, built on proven security practices, security updates and vulnerability management, and testing by internal and external experts.
