EarFun Air Pro ANC Wireless Earbuds

What's in the Box

EarFun Air Pro, Charging Case, Ear Tips (S, M, L), USB-C Cable, User Manual

Product Diagram

1. Tap control zone

2. Microphone

3. Charging contactor

4. Pairing indicator

5. Charging dock

6. Charging case button

7. USB-C charging port

8. Charging case

9. Charging case indicator

Charging

1. Open or close the charging case to activate the LED battery indicator.
2. Remove the film on the earbuds when taking them out of the charging case for the first time.
3. Fully charge both the earbuds and the charging case before the first-time use.
4. The charging case must be closed for the earbuds to start charging.
5. Fully dry off the earbuds and the USB-C port before charging.

Charging Status Indicators:

• Red Light flash 3 times: > 60%
• Red Light flash 2 times: > 30%
• Red Light flash 1 time: > 5%
• Red Light flash 1 time quickly: <5% (Please charge)

Charging Instructions:

Remove the film for the first-time use. Note: For the first-time use, please charge the earbuds for 30 seconds to activate it.

Connect USB-C cable for charging.

Charging Indicators:

• Red Light on: Charging
• Red Light off: Charging complete

Specifications

How to Fit

Note: If the earbuds are not worn correctly, it may affect the noise cancelling effect.

1. Choose the ear tips that fit your ears best.
2. Identify the left and right earbuds.
3. Insert the earbuds into the canal of your ears.
4. Turn and find the most comfortable position.

Pairing Your Earbuds

1. First time pairing with device

Step 1: Open the charging case, the earbuds will automatically power on and enter into pairing mode.

Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.

Step 3: Select “EarFun Air Pro” from the list of Bluetooth devices shown (if a password is needed, type '0000').

Notes:

• The earbuds will automatically connect with the device they were last paired with when the case is opened.
• Each earbud could be used independently.

2. Connect to a New Device

Option A

Step 1. Unpair the earbud from the Bluetooth-enabled device when it's connected. The earbud will lose Bluetooth connection to the current device and enter into pairing mode.

Step 2. Search on the new device and connect.

Option B

Step 1. Place both earbuds back into the charging case and keep the cover open, then press and hold the charging case button for 3 seconds until the pairing indicator on the charging case flashes white and green alternately and rapidly.

Step 2. Search on the new device and connect.

Functions

Note: EarFun Air Pro has a built-in accelerometer sensor for tap to control the earbuds. A light touch will not be able to control them.

Power on/off

Open the charging case, the earbuds will automatically power on. Place the earbuds back into the charging case. Close the case and the earbuds will automatically power off.

Playing music

• Play/Pause: Tap twice (R)
• Next track: Tap triple (R)

Hands-free conversation

• Answer/End a call: Tap twice (L/R)
• Reject a call: Tap triple (L/R)

Activate the voice assistant

• Voice assistant: Tap triple (L)

Noise cancelling control

• Noise Reduction: Tap twice (L)
• Ambient sound: (No specific control mentioned for ambient sound)
• Normal: (No specific control mentioned for normal mode)

Reset and Reconnecting

If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps:

1. Place both earbuds into the charging case.
2. Keep the charging case open and double press the charging case button. The pairing indicator will flash white rapidly, then flash white and green alternately, then the earbuds have been reset successfully.
3. Delete the old connection from the Bluetooth device and reconnect “EarFun Air Pro”.

Troubleshooting

Q: Can I use both earbuds separately?

A: Yes, each earbud could be used independently.

Q: The earbuds are turned on, but it doesn't connect to my device?

A: To connect the earbuds to your device, please check if the Bluetooth of the device is on first, then select “EarFun Air Pro” on the Bluetooth list to get paired. If the earbuds still can't connect to your device, please try to reset it, or contact EarFun customer support.

Q: Why the connection is not stable and cuts out intermittently?

A: Please make sure there are no objects between the earbuds and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.

Q: What is the range of Bluetooth earbuds?

A: Bluetooth earbuds have a maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.

Q: Is there volume control on the earbuds?

A: No, please control the volume with the Bluetooth device.

Q: My earbuds will not switch on.

A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact EarFun customer support for warranty cover.

Q: Is the charging case waterproof?

A: No, the earbuds are IPX5 sweat & waterproof, but the charging case is not waterproof.

Q: Will the earbuds shut off automatically?

A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 60 minutes.

Customer Service

For FAQS and more information, please email to: service@myearfun.com

www.myearfun.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. To prevent possible hearing damage, do not listen at high volume levels for long periods.

Bluetooth® The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology(HK) Limited is under license. Other trademarks and trade names are those of their respective owners.

UK Declaration of Conformity

Hereby, Earfun Technology (HK) Limited declares that the radio equipment type [TW302] is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address: www.myearfun.com

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

EU Declaration of Conformity

EarFun Technologh(HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com

NCC聲明:

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Model: TW302 Input: 5V ⎓ 1A

Made in China Output: 5V ⎓ 0.15A(R+L)

FCC ID: 2AVIT-TW302

CE PS E ROHS UK CA