Enbrighten Z-Wave Plus In-Wall Tamper Resistant Smart Outlet, 700S
Z-Wave Protocol Implementation Conformance Statement
General Information
| Product Identifier: | 58449/ZWA1003 |
| Brand Name: | Enbrighten |
| Product Version: | HW: 01 FW: 01.07 |
| Z-Wave Certification #: | ZC14-22110169 |
Product Features
| Switch Type | Push Button with Indicator |
| Firmware Updatable | Updatable by Consumer by RF |
| Switch Load Capacity Watts | 1500W |
| Neutral Wire Required | Yes |
| Switch Load Capacity Current | 15A |
Z-Wave Product Information
| Supports Z-Wave Beaming Technology? | Yes |
| Supports Z-Wave Network Security? | Yes |
| Supports Z-Wave AES-128 Security S0? | No |
| Supports Security S2? | Yes: S2 Authenticated, S2 Unauthenticated |
| SmartStart Compatible? | Yes |
Z-Wave Technical Information
| Z-Wave Frequency: | U.S. / Canada / Mexico, U.S. / Canada / Mexico, U.S. / Canada / Mexico |
| Z-Wave Product ID: | 0x3339 |
| Z-Wave Product Type: | 0x4952 |
| Z-Wave Hardware Platform: | ZGM130S037HGN2 / ZGM130S037HGN1 |
| Z-Wave Development Kit Version: | 7.18.1 |
| Z-Wave Library Type: | Enhanced 232 Slave |
| Z-Wave Device Type / Role Type: | Binary Switch DT / Always On Slave |
Association Group Information
Group # / Max Description
- Nodes: 1 / 5
- Nodes: 2 / 5
Supported Command Classes (20):
- Application Status
- Association V2
- Binary Switch V2
- Configuration V4
- Firmware Update Meta Data V5
- Manufacturer Specific V2
- Powerlevel
- Scene Actuator Configuration
- Supervision
- Version V3
- Association Group Information (AGI) V3
- Basic V2
- Central Scene V3
- Device Reset Locally
- Indicator V3
- Multi Channel Association V3
- Scene Activation
- Security 2
- Transport Service V2
- Z-Wave Plus Info V2
Related Documents
 |
Z-Wave Plus In-Wall Smart Switch Conformance Statement This document outlines the Z-Wave Protocol Implementation Conformance Statement for the Z-Wave Plus In-Wall Smart Switch, White and Light Almond Paddles, 800S, detailing its general information, product features, and Z-Wave technical specifications. |
 |
Enbrighten Z-Wave In-Wall Smart Outlet Installation and User Guide Comprehensive guide for the Enbrighten Z-Wave In-Wall Smart Outlet (Model ZW1002/55256), covering installation, wiring, setup, operation, and troubleshooting. Learn to control your appliances remotely and integrate with your Z-Wave smart home network. |
 |
Enbrighten Z-Wave In-Wall Smart Receptacle Installation and User Guide This guide provides instructions for installing and using the Enbrighten Z-Wave In-Wall Smart Receptacle (Model ZWA1003). It covers wiring, setup with a Z-Wave controller, LED indicator functions, and troubleshooting. |
 |
Enbrighten Z-Wave Plus In-Wall Smart Switch - Protocol Conformance Statement This document provides the Z-Wave Protocol Implementation Conformance Statement for the Enbrighten Z-Wave Plus In-Wall Smart Switch (Model 58433/ZWA4011), detailing its technical specifications, features, and Z-Wave capabilities. |
 |
Enbrighten ZWN4108 Plug-in 2 Outlet Switch User Manual User manual for the Enbrighten ZWN4108 Plug-in 2 Outlet Switch, detailing its features, specifications, installation, and operation within a Z-Wave network. Includes FCC compliance information and safety warnings. |
 |
Enbrighten Z-Wave LED Light Bulb - Protocol Implementation Conformance Statement Detailed Z-Wave protocol conformance statement for the Enbrighten Z-Wave LED Light Bulb, including technical specifications, security features, and supported command classes. |
 |
Enbrighten In-Wall Smart Fan Control ZWA4013 Installation Guide Comprehensive installation guide for the Enbrighten ZWA4013 In-Wall Smart Fan Control. Learn how to wire, configure, and integrate this Z-Wave device for smart home control of your ceiling fans. |
 |
Enbrighten 58446 ZWA4013 In-Wall Smart Fan Control Installation Guide Comprehensive guide for installing and using the Enbrighten 58446 ZWA4013 In-Wall Smart Fan Control, featuring Z-Wave connectivity, multi-location control, and adjustable LED indicators. |