How to Connect Ofantop Smart Ceiling Fan with Smart Life APP
Connecting Your Ofantop Smart Ceiling Fan
Follow these steps to connect your Ofantop Smart Ceiling Fan to the Smart Life App for enhanced control.
Step 1: Download the Smart Life App
Download the Smart Life App from your device's app store.
Step 2: Register and Log In
Register for a Smart Life account or log in if you already have one.
Step 3: Prepare the Fan for Pairing
Turn off the power to the fan at the break box. Turn it back on and open the Smart Life app. Tap the "Add Device" button.
Step 4: Enable Bluetooth
Ensure Bluetooth is enabled on your device. The app will prompt you to enable it for easier device discovery.
Step 5: Select the Fan Device
Scroll through the list of "Small Home Appliances" and select "Fan (Wi-Fi)".
Step 6: Connect to Wi-Fi
Select your 2.4GHz Wi-Fi network and enter the password. If your network is 5GHz, you may need to adjust your router settings to enable 2.4GHz.
Step 7: Initiate Pairing Mode
Press and hold the "Reset" button (labeled "BH" or "8H") on the remote control for 5 seconds. Release the button when you hear a beep sound. Then, press the "Confirm the indicator is blinking" button in the app.
Step 8: Select Indicator Status
On the next screen, choose the indicator light status. Select "Blink Quickly" if the indicator is blinking rapidly, or "Blink Slowly" if it is blinking slowly.
Step 9: Complete Connection
Wait for the app to connect to the fan. Once you see the "Added successfully" message, press the "Done" button. Congratulations, your fan is now connected.
Troubleshooting Connection Issues
If you encounter issues after Step 9, try the following alternative pairing method:
Alternative Pairing Method (Steps 9-01 & 9-02)
- Step 9-01: Press and hold the "4H" timer button on the remote control for 5 seconds until a long buzzer sound is heard. Release the button. The receiver should chirp at 3-second intervals, indicating WIFI AP pairing mode. Then, press "Confirm the indicator is blinking" in the app.
- Step 9-02: On the next page, select "Blink Slowly". This should help you add the device successfully.
Fan and Light Control
Light Settings (Step 10)
The app allows you to control the light's on/off status, adjust its temperature, and dim the brightness.
Fan Settings (Step 11)
Access fan settings to control the fan's running direction (switch between summer and winter modes), adjust the speed, and set timers.
Press the second button from the bottom in the app interface to switch between light and fan settings.