DJI Mini 3 Pro Two-Way Charging Hub (Figure A)
Status LEDs: The status LEDs display battery levels for three seconds after the batteries are inserted into the charging hub. The LEDs in an array blink successively during charging and change to solid green after the corresponding battery is fully charged.
Function Button: Press to check the battery power level. When both the Intelligent Flight Battery and an external device are connected for charging, the battery will be charged before the external device. Press and hold the function button for two seconds to switch the charging priority.
⚠️ Safety Precautions: Place the charging hub on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards. Do not attempt to touch the metal terminals on the hub. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
For more information, refer to the user manual by visiting: dji.com/mini-3-pro/downloads or dji.com/mini-3/downloads.
Specifications
| Model Number | CHX162-30 |
|---|---|
| Supported Charger | USB Power Delivery charger |
| Input (USB-C) | 5V 3A, 9V 3A, 12V 3A |
| Output (USB) | 5V 2A |
| Operating Temperature | 5° to 40° C (41° to 104° F) |
DJI Mini 3 Propellers (Figure B)
Installation:
- Mount the marked propellers to the marked motors and the unmarked propellers to the unmarked motors.
- Use the screwdriver provided in the aircraft package to remove and install the screws. Unsuitable screwdrivers may damage the screws.
- Use the new screws provided with the propellers when installing. Do not reuse old screws.
- Use two propellers from the same package. Do not mix with propellers from other packages.
DJI Mini 3 Pro Intelligent Flight Battery Plus
⚠️ Important Note: Installing the DJI Mini 3 Pro Intelligent Flight Battery Plus will increase the aircraft's weight to over 250g. Ensure you understand and comply with local laws and regulations and, if required, have obtained corresponding approval and clearance from the related government agencies before flight.
Flight Considerations: When flying higher than 3,000 m (9,843 ft) above sea level with the DJI Mini 3 Pro Intelligent Flight Battery Plus installed, the flight performance of the aircraft will be limited (such as flight height and flight speed). To ensure flight safety, only fly below 3,000 m (9,843 ft) above sea level and fly with caution while maintaining VLOS (visual line of sight) of the aircraft at all times.
Power Management: Increased aircraft weight affects the flight power. To avoid power shortage, do not install other payloads (such as propeller guards) after the DJI Mini 3 Pro Intelligent Flight Battery Plus is installed.
Specifications
| Model Number | BWX162-3850-7.38 |
|---|---|
| Capacity | 3850 mAh |
| Charging Temperature | 5° to 40° C (41° to 104° F) |
