Compaq 6720s Technique
Written By: Internet Libre
Guide ID: 54140 - Draft: 2019-05-23
Product Overview
This document provides a technique guide for the Compaq 6720s laptop.
A top view of a closed Compaq 6720s laptop, showing the silver casing and the HP logo in the center.
Tools Required
- Essential Electronics Toolkit (1)
Disassembly Instructions
Step 1: Accessing Internal Components
The Compaq 6720s laptop is open, revealing the internal components. The hard drive bay and RAM slots are visible.
The underside of the Compaq 6720s laptop, displaying various labels and ports.
- Turn the Compaq 6720s laptop over.
- Remove the HDD cover and RAM cover, unscrewing all securing screws.
- Release the DVD drive by removing three screws located underneath it. Ensure the screw beneath the HDD is also removed.
Step 2: Power Button Cover Removal
The Compaq 6720s laptop is turned right side up and open, showing the keyboard and trackpad area.
A hand is shown using a pry tool to lift the power button cover near the laptop's screen bezel.
- Turn the laptop right side up and open it.
- Gently pull the power button cover upwards. Start by lifting the edge closest to the screen, then proceed to lift the parallel edge. A pry tool may be necessary for this step.
Reassembly
To reassemble your device, follow these instructions in reverse order.