RDW Type-Approval Communication: Victron Energy ORION XS 1400 DC-DC Battery Charger
Document Reference: E4*10R06/03*5860*00
Issuing Authority: RDW, Division Vehicle Regulation & Admission, The Netherlands
General Information
This document communicates the type-approval status concerning the type-approval of an electrical/electronic sub-assembly under Regulation number 10.
Status Regarding Approval:
- Approval granted
- Approval extended
- Approval refused
- Approval withdrawn
- Production definitely discontinued
(Note: Specific status selection is not indicated in the provided text, but these are the options presented.)
Product and Manufacturer Details
| Item | Description |
|---|---|
| 1. Make (trade name of manufacturer) | Victron Energy |
| 2. Type and general commercial description(s) | ORION XS 1400 DC-DC Battery Charger |
| 3. Means of identification of type | By means of sticker |
| 3.1. Location of that marking | Screenprint on top of housing |
| 4. Category of vehicle | N/A |
| 5. Name and address of manufacturer | Victron Energy B.V., de Paal 35, 1351JG, Almere, Netherlands |
| 6. Location and method of affixing of the approval mark | Top side of housing |
| 7. Address(es) of assembly plant(s) | [Not Specified] |
Testing and Approval Authority
| Item | Description |
|---|---|
| 8. Additional information (where applicable) | See Appendix below |
| 9. Technical service responsible for carrying out the tests | DEKRA Certification B.V., Meander 1051, 6825 MJ Arnhem, Netherlands |
| 10. Date of test report | 2025-05-26 |
| 11. Number of test report | 2297652.0501-EMC |
| 12. Remarks (if any) | See Appendix |
| 13. Place | Zoetermeer |
| 14. Date | 15 July 2025 |
| 15. Signature | B. Loen [Signature] |
| 16. Index to information package | The index to the information package lodged with the approval authority, which may be obtained on request, is attached. |
| 17. Reasons for extension | -- |
Appendix: Additional Information
1. Additional information
- 1.1. Electrical system rated voltage: 12Vdc or 24Vdc V, positive/negative ground
- 1.2. This ESA can be used on any vehicle type with the following restrictions: No restrictions
- 1.2.1. Installation conditions, if any: None
- 1.3. This ESA can be used only on the following vehicle types: All vehicles
- 1.3.1. Installation conditions, if any: None
- 1.4. The specific test method(s) used and the frequency ranges covered to determine immunity were: Transient pulse immunity along supply lines according ISO 7637-1 /-2
- 1.5. Laboratory accredited to ISO 17025 and recognized by the Approval Authority responsible for carrying out the tests: DEKRA Certification B.V., Meander 1051, 6825 MJ Arnhem, Netherlands
2. Remarks
- Attached to this Type Approval:
- DEKRA EMC Report: 2297652.0501-EMC
- BOM
- PCB Schematics
- Product Description
