Introduction
This user manual provides comprehensive guidance for the PowMr POW-SunSmart 6.5KP, an all-in-one solar storage inverter designed for residential and commercial solar energy storage systems. It covers essential information on installation, operation, safety precautions, and maintenance to ensure optimal performance and longevity of the device.
Key Features
- Supports various energy storage batteries, including lead-acid and lithium-ion.
- Features dual activation for lithium-ion batteries.
- Offers split-phase/single-phase pure sine wave output.
- Adjustable phase voltage within a specified range.
- Dual-channel PV input with simultaneous MPPT for efficient power tracking.
- Provides four charge modes: PV only, mains first, PV first, and mains + PV.
- Includes timed charge and discharge functions for cost savings.
- Equipped with energy-saving mode to reduce no-load losses.
- Offers two output modes: mains bypass and inverter output for uninterrupted power supply.
- Supports LCD display for system data and operating status.
- Provides 360° protection, including short circuit, overcurrent, overvoltage, undervoltage, and overload protection.
- Supports CAN, USB, and RS485 communication.
System Overview
The POW-SunSmart 6.5KP integrates PV storage, mains charge, and energy storage, outputting sinusoidal AC. It is equipped with DSP control and an advanced control algorithm for high response speed and reliability, making it suitable for various applications.
The system typically includes:
- PV module for solar energy conversion.
- Mains or generator for AC input and battery charging.
- Battery for power supply during insufficient PV power or absence of mains.
- Household loads such as refrigerators, lighting, TVs, and air conditioners.
- The inverter as the core energy conversion device.
Safety Instructions
Important Safety Instructions
Please read and understand all safety instructions provided in this document. Failure to comply may result in property damage or personal injury.
- Always keep the user manual for future reference.
- Ensure proper grounding of the inverter/charger.
- Do not operate the product in moist or dusty environments.
- Ensure adequate ventilation and clearance space around the product.
- Exercise caution when handling batteries and tools.
- Only qualified personnel should assemble the equipment.
Installation Guidelines
Installation Location Considerations:
- Install on a solid surface.
- Position the inverter at eye level for easy LCD display viewing.
- Maintain adequate spacing for air circulation and heat dissipation (approx. 20cm on sides, 50cm above/below).
- Ensure ambient temperature is between -10°C to 55°C.
- Install vertically against the wall.
- Avoid installation near flammable materials, in potentially explosive areas, or on combustible building materials.
- Do not install in direct sunlight or damp environments.
Further Information
For detailed wiring diagrams, troubleshooting, and maintenance procedures, please refer to the respective sections within this manual.
For the latest user manual and software updates, visit the official PowMr website or contact customer service.
