Diagram Overview
The diagram illustrates the Nedis VCBS100RD bagless vacuum cleaner. It shows the main body of the vacuum, including the dustbin, motor housing, wheels, and handle. Connected to the body are the hose, telescopic tube, and various nozzles. Numbered labels point to specific components for identification.
Product Components
- On/Off Button: Use the button to turn the device on or off.
- Cord Rewind Button: To extend the power cord, hold the plug and pull out the required length from the back of the device. To retract the power cord back into the device, press and hold the cord rewind button. Manually guide the power cord to ensure it does not swing back.
- Hose: To attach the hose, insert the hose outlet into the hose connection until the release buttons click into place.
- Telescopic Tube: To assemble the telescopic tube, slide the upper part of the tube into the lower part of the tube. To attach the tube, insert the hose into the telescopic tube.
- Floor Nozzle: To attach the floor nozzle, insert the telescopic tube into the floor nozzle.
- Crevice Tool: To attach the crevice tool, insert the hose or telescopic tube into the crevice tool.
- Floor Type Selector: Use the selector for different floor types such as laminates, tiles, etc., or for cleaning carpets.
- Airflow Control Switch: To adjust the airflow, set the switch to the desired position.
- Dustbin Compartment: Place the dustbin into the dustbin compartment.
- Multi-cyclonic Plastic Filter: Place the multi-cyclonic plastic filter into the dustbin compartment.
- Parking Clip: To "park" the device, place the telescopic tube with the floor nozzle into the parking clip.
- Carrying Handle: For carrying the device.
- Wheel: For mobility.
Safety Instructions
General Safety
- Read the manual carefully before use. Keep the manual for future reference.
- The manufacturer is not responsible for subsequent damage or damage to property or persons caused by non-compliance with safety instructions and improper use of the device.
- Use the device only for its intended purpose. Do not use the device for purposes other than those described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace it immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- The device is suitable for domestic use only. Do not use the device for commercial purposes.
- Do not use the device in high humidity areas, such as bathrooms and swimming pools.
- Do not use the device near bathtubs, showers, sinks, or other containers containing water.
- Do not use a timer or separate remote control system that automatically turns on the device.
- Do not cover the device.
- Place the device on a stable, level surface.
- Keep the device away from flammable materials.
Electrical Safety
⚠️ CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. ⚡️
- To reduce the risk of electric shock, this product should only be opened by authorized service technicians when service is required.
- Disconnect the product from the electrical network and other equipment if a problem occurs.
- Do not use the device if the power cord or plug is damaged or defective. If the power cord or plug is damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
- Before use, always check if the mains voltage is the same as the voltage on the device's rating plate.
- Do not move the device by pulling the power cord. Ensure the power cord cannot get tangled.
- Do not immerse the device, power cord, or plug in water or other liquids.
- Do not leave the device unattended while the plug is connected to the power supply.
- Do not use an extension cord.
Cleaning and Maintenance
Attention!
- Before cleaning or maintenance, always turn off the device, unplug it, and wait for it to cool down.
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device is not working properly, replace it with a new one.
- Do not immerse the device in water or other liquids.
- Clean the exterior of the device with a soft, damp cloth. Gently dry the device with a clean, dry cloth.
- Clean the ventilation openings with a soft brush.
- Regularly empty the dustbin and clean the multi-cyclonic plastic filter with a soft brush.
Help and Additional Information
If you need further assistance or have comments or suggestions, please visit the official Nedis page: www.nedis.com/support
Importer and Distributor for Bulgaria:
VIKIVAT OOD
Gr. Plovdiv, 4003, Bulgaria
Ul. Mostova 3
W: https://vikiwat.com
E: info@vikiwat.com
T: 0700 45 445 / *4545
Manufacturer:
NEDIS B.V.
T: +31 (0)73-5993965
E: service@nedis.com
W: www.nedis.com/contact
NEDIS B.V. De Tweeling 28 5215 MC 's-Hertogenbosch THE NETHERLANDS