ZapLikePRO 360 Electronic Mosquito Killer
This is a quick start guide for the ZapLikePRO 360. For any questions, please contact TBI-PRO customer support at (800) 674-92-29 (Toll-Free) or via email at support@tbi-pro.com.
Safety Notices
- Plug in only with dry hands. [warning-symbol]
- Not for use by children under 16 years old. [age-restriction-16-symbol]
- Change the attractant only when the device is turned off. [power-off-symbol]
- Wash hands with soap after changing the attractant. [hand-washing-symbol]
- Do not leave unattended. [unattended-symbol]
- Forbidden for children to play with the device. [no-children-playing-symbol]
Setup Instructions
- Step 1: Rotate the base of the device 90 degrees.
- Step 2: Remove the protective cover from the attractant sachet. The sachet contains mosquito attractant.
- Step 3: Place the attractant into the designated area in the lid.
- Step 4: Attach the base of the device by aligning it correctly and rotating it 90 degrees to secure.
- Step 5: Position the ZapLikePRO 360. For optimal performance, place it at least 1 ft. (0.3 m) from walls and hang it approximately 4 ft. (1.2 m) above the ground.
- Step 6: For outdoor use, position the device at least 25 ft. (7.6 m) away from areas where people gather, such as patios or seating areas. Also, ensure it is placed at least 25 ft. (7.6 m) away from any water sources like swimming pools.
- Step 7: Plug the device into a power outlet.
- Step 8: The device operates on a 30-day cycle for attractant replacement. Remove the old attractant and replace it with a new one as needed. The cleaning tray should also be checked and cleaned periodically.