TBI Pro | Home Amazon American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa Amazon American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa
User Manual for TBI PRO models including: Air Pro Earbuds
After bluetooth device is connected successfully, no need to repeat Pairing steps again. After earbuds powered on (according to method 1 or 2), it will connect with the latest connected device (mobile phone, laptop, etc.) automatically. If the latest connected device is not near to the earbuds or Bluetooth function is turned off, the earbuds ...
AirPro User Manual (PDF) TBI Pro TBI Pro AIRPRO,Wireless,Earbuds,Bluetooth,with,36 ,Hours,Playtime,-,TWS,True,Pro,Earbuds,&,Charging,Case,,Display,–,Waterproof,in-Ear,Headphones,for,All,Devices,,Running,,Workout,,
Privacy policy – TBI Pro
File Info : application/pdf, 24 Pages, 2.59MB
DocumentDocumentAir Pr o USER MANUAL TABLE OF CONTENTS Safety and handling 4 In the box 6 Charging 7 Power On 10 Pairing 12 Power Off 14 Master/slave mode 16 How to wear 17 Features 18 Specifications 20 Troubleshooting 21 Read these instructions completely, they contain safety information. Keep them for future reference. If you have any questions, feel free to contact us by phone number: (800) 674-92-29 (Free) or via email: support@tbi-pro.com 3 SAFETY AND HANDLING IMPORTANT SAFETY INFORMATION Handle AirPro earphones and case with care. They contain sensitive electronic components, including batteries, and can be damaged. Don't use damaged AirPro earphones or case as they may cause injury. 4 Safety and handling Keep it away from high temperature and high humidity environment. Keep it away from WIFI and routers and other high-frequency transmitting devices. This will affect the signal reception of the unit and cause the sound to be broken and disconnected. Please use this product in the effective environment 50 ft (15 m), and there should be no physical blocking between the Bluetooth device and the headset. When charging the charging case, be sure to use a USB to AC adapter with DC 5 V power output to avoid malfunction or abnormal heat generation. Use only the supplied charging cable to charge the System. To avoid product damage do not use power supply with a voltage lower than 3V and higher than 5V. Safety and handling 5 IN THE BOX 2 x Earbud 1 x Charging Cord 1 x Charging Case 6 In the box CHARGING CHARGING THE CASE When charging the charging case, be sure to use a USB to AC adapter with DC 5V power output to avoid malfunction or abnormal heat generation. Use only the supplied charging cable to charge the case. Use the supplied USB charging cable to connect the charging case to a PC (powered on) or a USB AC adapter (commercially available). You can leave earphones in the case while charging or take them out. Charging 7 CHARGING The display on charging case will show 1%~100% to represent the current battery capacity. FULLY CHARGED The display on the charging case will show 100%. After charging is complete, unplug the USB charging cable. 8 Charging CHARGING EARBUDS When earbuds charging level is low, there will be voice prompt. Put the earbuds into the charging case and close the top to charge the earbuds. White indicator light will turn on once earbuds are placed in the case for charging. The display will show left/right earbuds charging status, it turns off automatically when fully charged. Charging 9 POWER ON METHOD 1 Open the charging case, the earbuds will power on and will pair with each other automatically. Take out both earbuds, the LED light of master earbud will start to flicker white alternately. (The left earbud is the master earbud as per factory default ) 10 Power On METHOD 2 Use this method if: a. Earbuds are taken out of from the charging case and in power off state. b. Battery of the charging case run out (If charging case is drained, earbuds won`t activate automatically as you take them out of case). Long press multifunction button of both earbuds for 2 seconds to power on. After powering on, the left and right earbuds will be connected to each other automatically. LED light of the master earbud will start to flicker white alternately. (The left earbud is the master earbud as per factory default) Power On 11 PAIRING For the first pairing with a bluetooth device, power on AirPro earbuds according to method 1 or 2. The LED light of master earbud will start to flash alternately. Turn on bluetooth search function on the device (mobile phone, laptop, etc.) and choose AIrPro V5 for connection. The device will show "CONNECTED" if successfully paired to earbuds. The earbuds are now ready to be used. 12 Pairing After bluetooth device is connected successfully, no need to repeat Pairing steps again. After earbuds powered on (according to method 1 or 2), it will connect with the latest connected device (mobile phone, laptop, etc.) automatically. If the latest connected device is not near to the earbuds or Bluetooth function is turned off, the earbuds will be at searching status (the LED light on earbuds will be flashing) If earbuds are far away from the paired device/s and was not able to establish connection, pairing mode will last no longer than 10 minutes and earbuds will power off automatically. Pairing 13 POWER OFF METHOD 1 Place the earbuds back into the charging case and close the lid. This will automatically power off the earbuds. Note: If the battery level of the charging case is at 0%, the earbuds will not power off automatically. Refer to Method 2. 14 Power Off METHOD 2 Press and hold an earbud (either left or right) for 6 seconds. The LED will light for 1 second and then powers off. If earbuds are disconnected and paired device/s was not able to establish connection within 10 minutes, earbuds will power off automatically. Power Off 15 MASTER/SLAVE MODE This product has master/slave switch function. Open the charging case, and take out any earbud, it will connect to the device (mobile phone, laptop, etc.) and start to work, if another earbud is taken out, it will also connect to device automatically for simultaneous work. When the master earbud drained, you can put it back to the case, after that the slave earbud will be switched to the master earbud automatically and continue to work. 16 Master/slave mode HOW TO WEAR Please put the earbuds into the cochlea gently, and adjust to the suitable angle. How to wear 17 FEATURES PHONE CALLS Answer a call: To answer a phone call, short press the multifunction button on any earbud. Ending a call: When calling, short press the multifunction button on any earbud to end the call. CALL SWITCHING MODE During the phone call, long press the multifunction button on any earbud for 2 seconds to switch from earbuds to phone, then long press the multifunction button on any earbud for 2 seconds to switch from phone to earbuds. ONE-KEY SIRI When earbuds is under standby or music playing mode, long press the multifunction button on any earbud to activate or close Siri (this feature is only available for IOS devices) 18 Features MUSIC FUNCTIONS On/Pause: When music is playing, short press the multifunction button on any earbud to pause the music and then, short press the multifunction button on any earbud to play the music again. Previous song: When music is playing, double press the left earbud to previous song. Next song: When music is playing, double press the right earbud to next song. Auto play: If music is playing before a phone call, music should start automatically after hanging up. Under mono mode, it is the same operation as in dual mode. Features 19 SPECIFICATIONS Bluetooth version Bluetooth Chipset Connection distance (open space without obstacles) Earbuds battery capacity Earbuds charging time Play time (on one charge) Case battery capacity Case charging time Charging input port Battery level indicator V5.0 Airoha AB1536U 10-15m 40mAh 1 hour 4-6 hours 400mAh 3-3.5 hours Type-C USB LED display 20 Specifications TROUBLESHOOTING If your bluetooth earbuds can not be paired with your phone, try the following steps: Please make sure the earbuds are fully charged; Please make sure the earbuds are powered on; Please make sure that earbuds are currently not paired with other active devices; Please make make sure the device Bluetooth function is enabled, and bluetooth function is ON; Please make sure that distance, between the earbuds and Bluetooth device, is less than 10m. Troubleshooting 21 If above steps were not able to help resolve your issue, please try to restore default factory settings: Make sure the earbuds are in power off state, long press the right/left earbuds for 5-10 seconds until the white light starts flashing for 1 second and will power off automatically. Power on the earbuds again, after 2 seconds double press the multifunction key of both earbuds and they will pair together. they will pair together, the LED light of left earbud will be flashing white. Then power off the earbuds again, put them back into charging case. After restoring the factory default settings, please connect the Bluetooth devices again ccording to the pairing methods above. When the earbuds do not work, try to reset them: Long press and hold the multifunctional button on both earbuds and put them into the charging case, then release the multifunctional button. 22 Troubleshooting Questions? Contact us at support@tbi-pro.com +1 800 674 92 29 (Mon-Fri 8:00-20:00 GMT-6) www.TBI-STORE.com Designed by TBI Pro in Illinois. Made in China SAFETY AND HANDLING Handle AirPro earphones and case with care. They contain sensitive electronic components, including batteries, and can be damaged. Don't use damaged AirPro earphones or case as they may cause injury. Keep it away from high temperature and high humidity environment. Keep it away from WIFI and routers and other high-frequency transmitting devices. This will affect the signal reception of the unit and cause the sound to be broken and disconnected. Please use this product in the effective environment 50 ft (15 m), and there should be no physical blocking between the Bluetooth device and the headset. When charging the charging case, be sure to use a USB to AC adapter with DC 5 V power output to avoid malfunction or abnormal heat generation. Use only the supplied charging cable to charge the System. To avoid product damage do not use power supply with a voltage lower than 3V and higher than 5V. CHARGING THE CASE When charging the charging case, be sure to use a USB to AC adapter with DC 5V power output to avoid malfunction or abnormal heat generation. PAIRING You can leave earphones in the case while charging or take them out. CHARGING EARBUDS Put the earbuds into the charging case and close the top to charge the earbuds. STEP 1 Open the charging case and take out both earbuds. After you pair a Bluetooth device for the first time, your earbuds can pair automatically. STEP 2 Turn on Bluetooth search function on the device (mobile phone, laptop, etc.) and choose AIrPro V5 for connection The device will show "CONNECTED" if successfully paired to earbuds. The earbuds are now ready to be used. MASTER/SLAVE MODE The left earbud is the master earbud as per factory default. When the master earbud is drained, you can put it back to the case, after that the slave earbud will be switched to the master earbud automatically and continue to work. HOW TO WEAR Please put the earbuds into the cochlea gently, and adjust to the suitable angle. FEATURES PHONE CALLS Answer a call: To answer a phone call, short press the multifunction button on any earbud. Ending a call: When calling, short press the multifunction button on any earbud to end the call. CALL SWITCHING MODE During the phone call, long press the multifunction button on any earbud for 2 seconds to switch from earbuds to phone, then long press the multifunction button on any earbud for 2 seconds to switch from phone to earbuds. ONE-KEY SIRI When earbuds is under standby or music playing mode, long press the multifunction button on any earbud to activate or close Siri (this feature is only available for IOS devices). MUSIC FUNCTIONS On/Pause: When music is playing, short press the multifunction button on any earbud to pause the music and then, short press the multifunction button on any earbud to play the music again. Previous song: When music is playing, double press the left earbud to previous song. Next song: When music is playing, double press the right earbud to next song. Auto play: If music is playing before a phone call, music should start automatically after hanging up. Questions? Contact us at support@tbi-pro.com +1 800 674 92 29 (Mon-Fri 8:00-20:00 GMT-6) Air Pr o QUICK START GUIDE