Sealey - Leading Professional Tool & Workshop Equipment Supplier
User Manual for SEALEY models including: LED3WB, 3W SMD-LED, RECHARGEABLE BULB
Sealey LED3WB Rechargeable 3W SMD LED Bulb | Workshopping.co.uk
Index of /SealeyData/PDFs/Instructions/
Sealey LED3WB Rechargeable 3W SMD LED Bulb » Product
File Info : application/pdf, 2 Pages, 323.77KB
DocumentDocument3W SMD LED RECHARGEABLE BULB MODEL NO: LED3WB Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to instructions 1. SAFETY 9 Ensure the lamp is fully charged before initial use. 8 DO NOT charge in damp conditions. 8 DO NOT turn the LED rechargeable bulb on when it is being charged. 8 DO NOT shine directly into your, another person's or an animal's eyes. 8 DO NOT allow children to use the LED rechargeable bulb. 8 DO NOT handle or move the LED rechargeable bulb whilst it is being charged. 8 DO NOT use the LED rechargeable bulb if you suspect that the battery or the lamp casing is damaged. 8 DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently recharge the battery at least once every six months of non-use. 8 DO NOT attempt to open, disassemble, modify or service the battery pack. 8 DO NOT crush, puncture or dispose of in fire or water. 9 Maintain the LED rechargeable bulb in good condition. 9 Store the LED rechargeable bulb in the original box, in a safe, dry, childproof area. 2. INTRODUCTION Rechargeable LED bulb ideal for camping or emergency situations. Operates 14 SMD LEDs that feature five selectable light settings. Features 3.7V 1.2Ah Li-ion rechargeable battery for up to 3 hours operating time on its highest setting. Produces up to 170 lumens. Built-in hanging hook for hands-free applications. 3. SPECIFICATION Model No: ............................................................... LED3WB Battery: .......................................................3.7V 1.2Ah Li-ion Charging time:....................4-5hr (Micro USB cable supplied) Functions: ............................... High/Medium/Low/Flash/SOS LED type: ...................................................... 14 x 0.2W SMD Lumen output: ........................................................................ ............ High/Medium/Low/Flash/SOS - 170/80/40/170/170lm Operating time: ...................................................... High - 3hr Power:.............................................................................. 3W 4. OPERATION 4.1. 4.1.1. 4.1.2. 4.1.3. 4.1.4. 4.1.5. 8 4.2. 4.2.1. 4.2.2. Unpack the product and check contents. Should there be any damaged or missing parts contact your supplier immediately. CHARGING THE LED RECHARGEABLE BULB Insert the Micro USB cable into the USB slot located on the top of the LED rechargeable bulb. Insert the other end into either a USB wall charger, a car accessory charger or the USB port on a computer (none supplied). When charging the indicator light will display red. When fully charged the indicator light will change to display green. Disconnect from the charging source. DO NOT leave the LED rechargeable bulb on charge for long periods. TURNING THE LED RECHARGEABLE BULB ON AND OFF The ON/OFF button is located on the top of the LED rechargeable bulb. Press the button once for HIGH brightness, then press the button further through until BLINK. Press once more to turn the LED rechargeable bulb off. 5. MAINTENANCE 5.1. After usage recharge the LED rechargeable bulb. 5.2. Use a clean, dry cloth to wipe down the LED rechargeable bulb after use. 8 DO NOT use solvents to clean the LED rechargeable bulb. © Jack Sealey Limited Original Language Version LED3WB Issue 2 (2,3) 07/0/21 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations. WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information. BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705. Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk © Jack Sealey Limited Original Language Version LED3WB Issue 2 (2,3) 07/0/21