QUICKGUIDE LUNA CEILING HOIST
REMEMBER ALWAYS TO PLACE THE HAND CONTROL IN THE CHARGER AFTER USE
A hand holds a black remote control, placing it into a wall-mounted charging cradle. A sound icon ? is shown next to the text "beep", indicating an audible alert. The charging cradle has indicator lights.
Battery
- 100%
- 50%
- MUST BE CHARGED
Operation
Lift up: Press the upper button on the hand control.
Lift down: Press the lower button on the hand control.
Reset
If the RESET button (marked with ⚙️) flashes: Press RESET down for 5 seconds, and the lift works again.
Emergency Stop
After pressing the red STOP button (marked with ?), Reset (⚙️) must be pressed down for 5 seconds, in order to re-activate the hand control.
Emergency Lowering
Electrical Emergency Lowering
Use if Lift up / Lift down isn't working. Press down the parachute button (marked with ?) during lowering. This will start after 5 seconds. You will hear a constant "beep" when pressing down the parachute button.
Manual Emergency Lowering
If the electrical powered emergency lowering is not working, use the manual emergency lowering:
- Take the key from the top of the charger.
- Remove the hand control.
- Remove the plug on the side of the Luna.
- Put the key into the Luna.
- Turn the key counter clockwise (⬅️) to lower the user.
A diagram shows the manual lowering process. Step 1: A red-handled key is shown being removed from a charger. Step 2: The hand control is shown detached. Step 3: A plug is being removed from the side of the hoist unit. Step 4: The key is inserted into a port on the hoist unit. Step 5: The key is shown being turned counter-clockwise with an arrow indicating rotation.
General Notes
The hand control must always be connected in order for the lift to function.
Product Information
Certifications: CE mark, ?
Weight Capacity: ⚖️ SWL 275 kg
Brand: WINN CARE
Document: Quickguide til Luna IPx4 / Version 12
[QR code for further information omitted]
