Manuals+

Winncare Ekamove Quick Start Guide

This guide provides essential steps for setting up and programming the Winncare Ekamove patient turning system. Please refer to the full user instructions for comprehensive details.

Set Up

⚠️ IMPORTANT SAFETY NOTICE: DO NOT USE THE EKAMOVE SYSTEM WITHOUT SIDE RAILS FITTED TO THE BED, IRRESPECTIVE OF THE DEGREE OF TILT REQUIRED. WE RECOMMEND THAT SIDE RAILS ARE ALSO FITTED WITH BUMPER PADS.

  1. Strap the Ekamove to the bed frame with sensors level with the patient's shoulders. On profiling beds, fit straps only to the moving parts of the frame.
  2. Fit the control unit to the foot of the bed and clamp it securely in place.
  3. Run the sensor lead and air hoses to the control unit, ensuring they avoid any pinching or trapping points. Connect them to the underside of the unit.
  4. Switch the control unit 'On'.
Diagram illustrating the setup of the Ekamove system on a bed. It shows a patient lying on the bed, with sensors positioned near the shoulders. The control unit is depicted at the foot of the bed, connected by leads and air hoses. Numbered callouts indicate: 1. The bed frame area for strap attachment, 2. The control unit, 3. The connection point for leads and hoses, and 4. The sensors.

Programming

  1. Press the '[Prog.]' button, then use the '+' or '-' buttons to select the desired programme.
  2. Press the '[Angle]' button, then use the '+' or '-' buttons to select the desired angle.
  3. Press the '[Time]' button, then use the '+' or '-' buttons to select the desired time.
  4. Press the '[START]' button ▶️ to start the programme.
Illustration of the Ekamove control unit interface. It features a display showing 'R 30°', directional arrows (up/down), and buttons labeled 'Prog.', 'Angle', 'Time', 'START', 'Enter', 'STOP', and 'ESC'. Numbered callouts guide the user through programming: 1. Press 'Prog.' and +/- to select a program, 2. Press 'Angle' and +/- to select an angle, 3. Press 'Time' and +/- to select a time, and 4. Press 'START' to begin.

Error Handling

IF ERROR CODE - ERR YPOS IS DISPLAYED: Simply lower the bed backrest until the alarm stops (below 25 degrees).

Air Hose Release

NOTE: The air hoses can be released to vent air quickly by pressing together the two grey lugs where they connect to the control unit.

Close-up image of two grey air hose connectors (labeled 'LR' and 'CPR') being pressed together, indicating how to release air.
Models: Ekamove Patient Turning System, Ekamove, Patient Turning System, Turning System

File Info : application/pdf, 2 Pages, 1.53MB

PDF preview unavailable. Download the PDF instead.

Winncare Mangar Ekamove Patient Turning System Manual ?v=1722431141

References

Adobe PDF Library 15.0 Adobe InDesign 16.0 (Windows)

Related Documents

Preview WINNCARE AERYS Medical Beds Technical Manual
This technical manual provides comprehensive information for the WINNCARE AERYS Medical Beds. It covers transport and storage, electrical characteristics, electromagnetic compatibility, technical specifications, electrical components, compatible mattresses, electrical connection diagrams, remote control operation, installation of accessories, troubleshooting, maintenance, cleaning, disinfection, scrapping, and spare parts. Designed for healthcare professionals and service technicians.
Preview Winncare Luna Ceiling Hoists Enhance Accessibility at Bad Brambach Therapy Center
Case study detailing the installation of 15 Winncare Luna ceiling hoists and tracks at the therapy and spa center in Bad Brambach, Germany, by distributor SLK Medical GmbH. The project prioritized accessibility for patients with disabilities and integrated seamlessly with the center's aesthetic design.
Preview WINNCARE Axtair Pressure Area Management Systems: Technical Manual
Technical manual and user guide for WINNCARE's Axtair pressure area management systems, including One Plus, Automorpho Plus, Axensor, and XXL models. Details product features, indications, installation, usage, and safety precautions for healthcare professionals.
Preview Luna Ceiling Hoist Quick Guide
Concise quick guide for the Luna Ceiling Hoist, covering battery status, lift operation, reset procedures, emergency stop, and emergency lowering (electrical and manual).
Preview Mangar Airflo Duo Compressor User Instructions | Winncare
Comprehensive user instructions for the Mangar Airflo Duo low-pressure air compressor, detailing intended use, safety warnings, operation, maintenance, troubleshooting, and specifications. Designed for use with Mangar Rhino lifting cushions and Swift transfer slides.
Preview WINNCARE Pressure Relief Cushions: Product Guide and Instructions
A comprehensive guide to WINNCARE's range of pressure relief cushions, including PRIMA FORM, KALLI, and ISKIO models. This document details indications, composition, clinical benefits, usage instructions, warnings, maintenance, storage, and disposal for preventing pressure ulcers and improving patient comfort.
Preview Winncare Ceiling Hoist Tracks: Discreet & Elegant Solutions for Healthcare
Explore Winncare's range of discreet and elegant ceiling and wall-mounted hoist tracks. Discover flexible, rugged, and easy-to-install solutions for healthcare environments, including 75mm, 135mm, and E-Track systems.
Preview Winncare Axtair Pressure Area Management Systems: Technical Manual
Comprehensive technical manual for Winncare's Axtair range of pressure area management systems, including Axtair One Plus, Automorpho Plus, Axensor AT12/AT15/AT20, XXL, and APC. Covers indications, device composition, clinical benefits, usage instructions, maintenance, and safety precautions.